|
E01B 1/00
|
Ballastway; Other means for supporting the sleepers or the track; Drainage of the ballastway |
|
E01B 2/00
|
General structure of permanent way |
|
E01B 3/00
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails |
|
E01B 3/02
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from wood |
|
E01B 3/04
|
Means for preventing cleaving |
|
E01B 3/06
|
Anti-cracking dogs |
|
E01B 3/08
|
Straps or bands for hooping or encircling sleepers |
|
E01B 3/10
|
Composite sleepers |
|
E01B 3/12
|
Longitudinal sleepers; Longitudinal sleepers integral or combined with tie-rods; Combined longitudinal and transverse sleepers |
|
E01B 3/14
|
Slabs; Blocks; Fastening tie-rods to them |
|
E01B 3/16
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from steel |
|
E01B 3/18
|
Composite sleepers |
|
E01B 3/20
|
Sleeper construction for special purposes, e.g. with openings for ballast working |
|
E01B 3/22
|
Longitudinal sleepers; Longitudinal sleepers integral or combined with tie-rods; Combined longitudinal and transverse sleepers |
|
E01B 3/24
|
Slabs; Blocks; Pot sleepers; Fastening tie-rods to them |
|
E01B 3/26
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from steel combined with inserts of wood, artificial stone, or other material |
|
E01B 3/28
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from concrete or from natural or artificial stone |
|
E01B 3/30
|
Hollow sleepers |
|
E01B 3/32
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from concrete or from natural or artificial stone with armouring or reinforcement |
|
E01B 3/34
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from concrete or from natural or artificial stone with armouring or reinforcement with pre-tensioned armouring or reinforcement |
|
E01B 3/36
|
Composite sleepers |
|
E01B 3/38
|
Longitudinal sleepers; Longitudinal sleepers integral or combined with tie-rods; Combined longitudinal and transverse sleepers; Layers of concrete supporting both rails |
|
E01B 3/40
|
Slabs; Blocks; Pot sleepers; Fastening tie-rods to them |
|
E01B 3/42
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from concrete or from natural or artificial stone combined with inserts of wood or other material |
|
E01B 3/44
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from other materials only if the material is essential |
|
E01B 3/46
|
Transverse or longitudinal sleepers; Other means resting directly on the ballastway for supporting rails made from different materials |
|
E01B 3/48
|
Distance keepers or tie-rods for sleepers |
|
E01B 5/00
|
Rails; Guard rails; Distance-keeping means for them |
|
E01B 5/02
|
Rails |
|
E01B 5/04
|
Grooved rails |
|
E01B 5/06
|
Reversible or invertible rails |
|
E01B 5/08
|
Composite rails; Compound rails with dismountable or non-dismountable parts |
|
E01B 5/10
|
Composite grooved rails; Inserts for grooved rails |
|
E01B 5/12
|
Rails with a foot serving as a sleeper |
|
E01B 5/14
|
Rails for special parts of the track, e.g. for curves |
|
E01B 5/16
|
Distance keepers |
|
E01B 5/18
|
Guard rails; Connecting, fastening or adjusting means therefor |
|
E01B 7/00
|
Switches; Crossings |
|
E01B 7/02
|
Tongues; Associated constructions |
|
E01B 7/04
|
Constructions with tongues turning about a vertical pivot at the end |
|
E01B 7/06
|
Constructions with flexible tongues or flexible fishplates |
|
E01B 7/08
|
Other constructions of tongues, e.g. tilting about an axis parallel to the rail, movable tongue blocks or rails |
|
E01B 7/10
|
Frogs |
|
E01B 7/12
|
Fixed frogs made of one part or composite |
|
E01B 7/14
|
Frogs with movable parts |
|
E01B 7/16
|
Jump-over frogs |
|
E01B 7/18
|
Combinations of switches and crossings |
|
E01B 7/20
|
Safety means for switches, e.g. switch point protectors, auxiliary or guiding rail members |
|
E01B 7/22
|
Special sleepers for switches or crossings; Fastening means therefor |
|
E01B 7/24
|
Heating of switches |
|
E01B 7/26
|
Lubricating of switches |
|
E01B 7/28
|
Crossings |
|
E01B 7/30
|
Jump-over crossings |
|
E01B 9/00
|
Fastening rails on sleepers, or the like |
|
E01B 9/02
|
Fastening rails, tie-plates, or chairs directly on sleepers or foundations; Means therefor |
|
E01B 9/04
|
Fastening on wooden or concrete sleepers or on masonry without clamp members |
|
E01B 9/06
|
Railways spikes |
|
E01B 9/08
|
Elastic spikes |
|
E01B 9/10
|
Screws or bolts for sleepers |
|
E01B 9/12
|
Retaining or locking devices for spikes or screws |
|
E01B 9/14
|
Plugs, sleeves, thread linings, or other inserts for holes in sleepers |
|
E01B 9/16
|
Plugs, sleeves, thread linings, or other inserts for holes in sleepers for wooden sleepers |
|
E01B 9/18
|
Plugs, sleeves, thread linings, or other inserts for holes in sleepers for concrete sleepers |
|
E01B 9/20
|
Fastening on wooden or concrete sleepers or on masonry without clamp members by keys |
|
E01B 9/22
|
Fastening on steel sleepers without clamp members |
|
E01B 9/24
|
Fastening on steel sleepers without clamp members by keys |
|
E01B 9/26
|
Welded fastenings |
|
E01B 9/28
|
Fastening on wooden or concrete sleepers or on masonry with clamp members |
|
E01B 9/30
|
Fastening on wooden or concrete sleepers or on masonry with clamp members by resilient steel clips |
|
E01B 9/32
|
Fastening on steel sleepers with clamp members |
|
E01B 9/34
|
Fastening on steel sleepers with clamp members by resilient steel clips |
|
E01B 9/36
|
Metal sole-plates for rails which rails are directly fastened to sleepers |
|
E01B 9/38
|
Indirect fastening of rails by using tie-plates or chairs; Fastening of rails on the tie-plates or in the chairs |
|
E01B 9/40
|
Tie-plates for flat-bottom rails |
|
E01B 9/42
|
Tie-plates for flat-bottom rails of two or more parts |
|
E01B 9/44
|
Fastening the rail on the tie-plate |
|
E01B 9/46
|
Fastening the rail on the tie-plate by clamps |
|
E01B 9/48
|
Fastening the rail on the tie-plate by clamps by resilient steel clips |
|
E01B 9/50
|
Fastening the rail on the tie-plate by keys |
|
E01B 9/52
|
Fastening the rail on the tie-plate by keys by resilient keys |
|
E01B 9/54
|
Rail chairs |
|
E01B 9/56
|
Rail chairs for rails with two or more treads |
|
E01B 9/58
|
Fastening the rail in the chair |
|
E01B 9/60
|
Rail fastenings making use of clamps or braces supporting the side or head of the rail |
|
E01B 9/62
|
Rail fastenings incorporating resilient supports |
|
E01B 9/64
|
Rail fastenings gripping or encircling the sleeper |
|
E01B 9/66
|
Rail fastenings allowing the adjustment of the position of the rails, so far as not covered by the preceding groups |
|
E01B 9/68
|
Pads or the like, e.g. of wood, rubber, placed under the rail, tie-plate, or chair |
|
E01B 11/00
|
Rail joints |
|
E01B 11/02
|
Dismountable rail joints |
|
E01B 11/04
|
Flat fishplates |
|
E01B 11/06
|
Flat fishplates with keys or pins |
|
E01B 11/08
|
Angle fishplates |
|
E01B 11/10
|
Fishplates with parts supporting or surrounding the rail foot |
|
E01B 11/12
|
Fishplates engaging only the rail foot |
|
E01B 11/14
|
Rail foot flange clips in one piece |
|
E01B 11/16
|
Fishplates for joining rails of different sections |
|
E01B 11/18
|
Fishplates for temporarily repairing broken rails |
|
E01B 11/20
|
Dismountable rail joints with gap-bridging |
|
E01B 11/22
|
Dismountable rail joints with gap-bridging by parts of the rails |
|
E01B 11/24
|
Dismountable rail joints with gap-bridging by parts of the rails with oblique or overlapping rail ends |
|
E01B 11/26
|
Dismountable rail joints with gap-bridging by parts of the rails with interlocking rail ends |
|
E01B 11/28
|
Dismountable rail joints with gap-bridging by parts of the joining members |
|
E01B 11/30
|
Fishplates with integral tread parts lying in the cross-section of the rail head |
|
E01B 11/32
|
Dismountable rail joints with gap-bridging by separate parts; Inserts bridging both rail heads |
|
E01B 11/34
|
Auxiliary rail beside the gap |
|
E01B 11/36
|
Fastening means for fishplates |
|
E01B 11/38
|
Locking arrangements for fastening means |
|
E01B 11/40
|
Dismountable rail joints combined with welded parts |
|
E01B 11/42
|
Joint constructions for relatively movable rails, e.g. rails on turntables, traversers, or swing bridges |
|
E01B 11/44
|
Non-dismountable rail joints; Welded joints |
|
E01B 11/46
|
General methods for making gapless tracks |
|
E01B 11/48
|
Joints made by flame welding |
|
E01B 11/50
|
Joints made by electric welding |
|
E01B 11/52
|
Joints made by alumino-thermal welding |
|
E01B 11/54
|
Electrically-insulating rail joints |
|
E01B 11/56
|
Special arrangements for supporting rail ends |
|
E01B 11/58
|
Bridge plates |
|
E01B 11/60
|
Bridge plates with wedges |
|
E01B 11/62
|
Bridge chairs |
|
E01B 13/00
|
Arrangements preventing shifting of the track |
|
E01B 13/02
|
Rail anchors |
|
E01B 15/00
|
Guards for preventing a person's foot being trapped in grooved rails |
|
E01B 17/00
|
Cattle guards connected to the permanent way |
|
E01B 19/00
|
Protection of permanent way against development of dust or against the effect of wind, sun, frost, or corrosion; Means to reduce development of noise |
|
E01B 21/00
|
Track superstructure specially adapted for tramways in paved streets |
|
E01B 21/02
|
Special supporting means; Draining of rails |
|
E01B 21/04
|
Special fastenings, joint constructions, or tie-rods |
|
E01B 23/00
|
PERMANENT WAY; PERMANENT-WAY TOOLS; MACHINES FOR MAKING RAILWAYS OF ALL KINDS - Details specially adapted therefor |
|
E01B 23/02
|
Tracks for light railways, e.g. for field, colliery, or mine use |
|
E01B 23/04
|
Fastening or joining means |
|
E01B 23/06
|
Switches; Portable switches; Turnouts |
|
E01B 23/08
|
Temporary tracks for use while repairing tramways |
|
E01B 23/10
|
Shiftable tracks for heavy loads, e.g. carrying excavators |
|
E01B 23/12
|
Sleepers |
|
E01B 23/14
|
Fastening or joining means |
|
E01B 23/16
|
Switches |
|
E01B 25/00
|
Tracks for special kinds of railways |
|
E01B 25/02
|
Tracks for rack railways |
|
E01B 25/04
|
Rack rails; Supports or connections for rack rails |
|
E01B 25/06
|
Switches; Frogs; Crossings |
|
E01B 25/08
|
Tracks for mono-rails with centre of gravity of vehicle above the load-bearing rail |
|
E01B 25/10
|
Mono-rails; Auxiliary balancing rails; Supports or connections for rails |
|
E01B 25/12
|
Switches; Crossings |
|
E01B 25/14
|
Tracks for cable-drawn railway vehicles |
|
E01B 25/15
|
Switches; Crossings |
|
E01B 25/16
|
Tracks for aerial rope railways with a stationary rope |
|
E01B 25/18
|
Ropes; Supports, fastening or straining means for ropes |
|
E01B 25/20
|
Switches; Crossings |
|
E01B 25/22
|
Tracks for railways with the vehicle suspended from rigid supporting rails |
|
E01B 25/24
|
Supporting rails; Auxiliary balancing rails; Supports or connections for rails |
|
E01B 25/26
|
Switches; Crossings |
|
E01B 25/28
|
Rail tracks for guiding vehicles when running on road or similar surface |
|
E01B 25/30
|
Tracks for magnetic suspension or levitation vehicles |
|
E01B 25/32
|
Stators, guide rails or slide rails |
|
E01B 25/34
|
Switches; Frogs; Crossings |
|
E01B 26/00
|
Tracks or track components not covered by any one of main groups |
|
E01B 27/00
|
Placing, renewing, working, cleaning, or taking-up the ballast, with or without concurrent work on the track; Devices therefor; Packing sleepers |
|
E01B 27/02
|
Placing the ballast; Making the ballastway; Redistributing ballasting material; Machines or devices therefor; Levelling means |
|
E01B 27/04
|
Removing the ballast; Machines therefor, whether or not additionally adapted for taking-up ballast |
|
E01B 27/06
|
Renewing or cleaning the ballast in situ, with or without concurrent work on the track |
|
E01B 27/08
|
Renewing or cleaning the ballast in situ, with or without concurrent work on the track the track having been taken-up |
|
E01B 27/10
|
Renewing or cleaning the ballast in situ, with or without concurrent work on the track without taking-up the track |
|
E01B 27/11
|
Renewing or cleaning the ballast in situ, with or without concurrent work on the track combined with concurrent renewal of track components |
|
E01B 27/12
|
Packing sleepers, with or without concurrent work on the track; Compacting track-carrying ballast |
|
E01B 27/13
|
Packing sleepers, with or without concurrent work on the track |
|
E01B 27/14
|
Manual tools or hand-held power tools therefor |
|
E01B 27/16
|
Machines therefor, e.g. so-called sleeper-tamping machines |
|
E01B 27/17
|
Machines therefor, e.g. so-called sleeper-tamping machines combined with means for lifting, levelling, or slewing the track |
|
E01B 27/18
|
Packing sleepers, with or without concurrent work on the track by introducing additional fresh material under the sleepers, e.g. by the measured-shovel method, by the blowing method |
|
E01B 27/20
|
Compacting the material of the track-carrying ballastway, e.g. by vibrating the track, by surface vibrators |
|
E01B 29/00
|
Laying, rebuilding, or taking-up tracks; Tools or machines therefor |
|
E01B 29/02
|
Transporting, laying, removing, or renewing lengths of assembled track, assembled switches, or assembled crossings |
|
E01B 29/04
|
Lifting or levelling of tracks |
|
E01B 29/05
|
Transporting, laying, removing, or renewing both rails and sleepers |
|
E01B 29/06
|
Transporting, laying, removing, or renewing sleepers |
|
E01B 29/09
|
Transporting, laying, removing, or renewing sleepers under, or from under, installed rails |
|
E01B 29/10
|
Transporting, laying, removing, or renewing sleepers under, or from under, installed rails for inserting or removing sleepers |
|
E01B 29/11
|
Removal involving destruction of the sleeper, e.g. the sectioning thereof |
|
E01B 29/13
|
Transporting, laying, removing, or renewing sleepers under, or from under, installed rails for moving sleepers in a direction parallel to the rails, e.g. for spacing or aligning them |
|
E01B 29/14
|
Transporting, laying, removing, or renewing sleepers under, or from under, installed rails for lifting sleepers up to the rails |
|
E01B 29/16
|
Transporting, laying, removing, or replacing rails; Moving rails placed on sleepers in the track |
|
E01B 29/17
|
Lengths of rails assembled into strings, e.g. welded together |
|
E01B 29/20
|
Moving rails placed on installed sleepers in the plane of the track |
|
E01B 29/22
|
Raising rails from sleepers, e.g. for inserting sole-plates |
|
E01B 29/24
|
Fixing or removing detachable fastening means or accessories thereof; Pre-assembling track components by detachable fastening means |
|
E01B 29/26
|
Fixing or removing detachable fastening means or accessories thereof; Pre-assembling track components by detachable fastening means the fastening means being spikes |
|
E01B 29/28
|
Fixing or removing detachable fastening means or accessories thereof; Pre-assembling track components by detachable fastening means the fastening means being of screw-and-nut type; Apparatus therefor, adapted to additionally drilling holes |
|
E01B 29/29
|
Fixing or removing detachable fastening means or accessories thereof; Pre-assembling track components by detachable fastening means the fastening means being of screw-and-nut type; Apparatus therefor, adapted to additionally drilling holes for horizontally-arranged fastening elements, e.g. fish-bolts |
|
E01B 29/32
|
Installing or removing track components, not covered by the preceding groups, e.g. sole-plates, rail anchors |
|
E01B 29/40
|
Means or arrangements for temporarily supporting laid tracks, or rails or sleepers in the track |
|
E01B 29/42
|
Undetachably joining or fastening track components in or on the track, e.g. by welding, by gluing; Pre-assembling track components by gluing; Sealing joints with filling components |
|
E01B 29/44
|
Methods for effecting joining of rails in the track, e.g. taking account of ambient temperature |
|
E01B 29/46
|
Devices for holding, positioning, or urging together the rail ends |
|
E01B 31/00
|
Working rails, sleepers, baseplates, or the like, in or on the line; Machines, tools, or auxiliary devices specially designed therefor |
|
E01B 31/02
|
Working rail or other metal track components on the spot |
|
E01B 31/04
|
Sectioning or slitting, e.g. by sawing, shearing, flame-cutting |
|
E01B 31/06
|
Making holes, e.g. by drilling, punching, flame-cutting |
|
E01B 31/08
|
Bending, e.g. for straightening rails or rail joints |
|
E01B 31/12
|
Removing metal from rails, rail joints, or baseplates, e.g. for deburring welds, reconditioning worn rails |
|
E01B 31/13
|
Removing metal from rails, rail joints, or baseplates, e.g. for deburring welds, reconditioning worn rails by milling |
|
E01B 31/15
|
Removing metal from rails, rail joints, or baseplates, e.g. for deburring welds, reconditioning worn rails by planing or filing |
|
E01B 31/17
|
Removing metal from rails, rail joints, or baseplates, e.g. for deburring welds, reconditioning worn rails by grinding |
|
E01B 31/18
|
Reconditioning or repairing worn or damaged parts on the spot, e.g. applying inlays, building-up rails by welding; Heating or cooling of parts on the spot, e.g. for reducing joint gaps, for hardening rails |
|
E01B 31/20
|
Working or treating non-metal sleepers in or on the line, e.g. marking, creosoting |
|
E01B 31/22
|
Cutting or grinding wooden sleepers, e.g. for forming rail seats |
|
E01B 31/23
|
Sectioning |
|
E01B 31/24
|
Forming, treating, reconditioning, or cleaning holes in sleepers; Drilling-templates |
|
E01B 31/26
|
Inserting or removing inserts or fillings for holes in sleepers, e.g. plugs, sleeves |
|
E01B 31/28
|
Applying or removing anti-splitting or like reinforcing means |
|
E01B 33/00
|
Machines or devices for shifting tracks, with or without lifting, e.g. for aligning track, for shifting excavator track |
|
E01B 33/02
|
Machines or devices for shifting tracks, with or without lifting, e.g. for aligning track, for shifting excavator track for slewing, i.e. transversely shifting, in steps |
|
E01B 33/04
|
Manual tools; Devices not mounted on vehicles |
|
E01B 33/06
|
Machines or devices for shifting tracks, with or without lifting, e.g. for aligning track, for shifting excavator track for slewing in a continuous operation, e.g. for tracks which carry excavators |
|
E01B 33/08
|
Boom track-slewing machines |
|
E01B 33/10
|
Bridge track-slewing machines |
|
E01B 33/12
|
Combined boom and bridge track-slewing machines |
|
E01B 33/18
|
Machines or devices for shifting tracks, with or without lifting, e.g. for aligning track, for shifting excavator track for slewing in a continuous operation, e.g. for tracks which carry excavators - Details not peculiar to a particular type of machine |
|
E01B 33/21
|
Arrangement or construction of rollers moving the rails |
|
E01B 35/00
|
Applications of measuring apparatus or devices for track-building purposes |
|
E01B 35/02
|
Applications of measuring apparatus or devices for track-building purposes for laying-out curves |
|
E01B 35/04
|
Wheeled apparatus |
|
E01B 35/06
|
Applications of measuring apparatus or devices for track-building purposes for measuring irregularities in longitudinal direction |
|
E01B 35/08
|
Applications of measuring apparatus or devices for track-building purposes for measuring irregularities in longitudinal direction for levelling |
|
E01B 35/10
|
Applications of measuring apparatus or devices for track-building purposes for measuring irregularities in longitudinal direction for aligning |
|
E01B 35/12
|
Applications of measuring apparatus or devices for track-building purposes for measuring movement of the track or of components thereof under rolling loads, e.g. depression of sleepers, increase of gauge |
|
E01B 37/00
|
Making, maintaining, renewing, or taking-up the ballastway or the track, not provided for in a single one of groups |
