Goods & Services

Goods made of plastics and plastic composites, namely, synthetic plastic as semi-finished products, in particular in the form of coils,foils, plates, blocks, rods, hollow rods, profile rods.

Goods & Services

Electrical and electronic components. Plastic films, other than for packaging; plastic films as substrates for the manufacture of electronic components, switches and microsystems, in particular in combination with laser direct structuring.

Goods & Services

Plastic material in the form of profiles (semi-finished goods), especially, plastic profiles [semi-finished goods] for insulating glazing systems for window and facade glazing, and for making metal and plastic composites structures. Distance pieces of plastic for the building sector; profiles of thermoplastic synthetic materials and expanded plastics, for building purposes. Processing and treatment services, in relation to the following goods: profiles of plastic and parts of plastic; coating services and surface treatments, in relation to the following goods: profiles of plastic and parts of plastic.

Goods & Services

(1) Semi-finished goods made of plastics for general industrial and manufacturing in the form of profiles, especially, being semi-finished goods made of plastic profiles, namely, foils, plates, blocks, rods, hollow rods and profile rods for insulating glazing systems for window and facade glazing, and for making metal and plastic composites structures. (2) Distance pieces of plastic hardware for the building sector, namely, plastic spacers used in the assembly of windows and facade glazings; profiles of thermoplastic synthetic materials and expanded plastics, namely, panels of thermoplastic composite and thermoplastic resin sheets, for building purposes. (1) Processing and treatment services, namely, coating services and surface treatment for all of the aforesaid services, namely, the following products: profiles of plastic and parts of plastic namely, foils, plates, blocks, rods, hollow rods and profile rods; coating services and surface treatments for all of the aforesaid services, namely, the following products: profiles of plastic and parts of plastic, namely, foils, plates, blocks, rods, hollow rods and profile rods.

Goods & Services

Semi-finished products made of plastics and plastic composites, namely, plastic profiles for insulating glazing systems for window and facade glazing; semi-finished plastic profiles for making metal and plastic composite structures. Distance pieces in the nature of plastic shaped parts for the building sector; Non-metallic building materials and building elements, namely, profiles of thermoplastic synthetic materials and expanded plastics for windows and facade glazings. Coating application services and surface treatments for profiles of plastic and parts of plastic.

Abstract

In a method for producing an interposer, a moulded part is produced by means of an injection moulding or injection-compression moulding process and has a surface topography with cavities on at least one side transferred by means of the injection moulding or injection-compression moulding process, wherein, for example, PEEK (polyether ether ketone) is used as the base material for the injection moulding or injection-compression moulding process. The entire surface of the moulded part produced in this way is coated with a conductive material on the side that has the surface topography. The conductive material is removed, for example by polishing, on the side having the surface topography, such that conductive material is present only in the cavities, wherein the conductive material remaining in the cavities forms contact pads for one or more semiconductor chips on that side of the moulded part that has the surface topography. Vias extending through the moulded part to a second moulded part side that is opposite the at least one side can be created using an LDS process.

IPC Classes  ?

• H01L 21/48 - Manufacture or treatment of parts, e.g. containers, prior to assembly of the devices, using processes not provided for in a single one of the groups or
• H01L 23/00 - Details of semiconductor or other solid state devices
• H01L 23/498 - Leads on insulating substrates
• B29C 45/00 - Injection moulding, i.e. forcing the required volume of moulding material through a nozzle into a closed mouldApparatus therefor

Abstract

A fiber-reinforced composite material (K), containing a thermoplastic polymer matrix and at least one natural-fiber component, is technically advantageous if it contains at least 45% (v/v) of a styrene (co)polymer (A) as polymer matrix, 30-55% (v/v) of a natural-fiber sheet material (B) as natural-fiber component, optionally 0-10% (v/v) of an additional polymer component (C), and optionally 0-10% of at least one additive (D), the volume percentages of components (A) to (D) adding up to 100 volume percent of the composite material (K).

IPC Classes  ?

• B29C 70/06 - Fibrous reinforcements only
• B29C 70/50 - Shaping or impregnating by compression for producing articles of indefinite length, e.g. prepregs, sheet moulding compounds [SMC] or cross moulding compounds [XMC]
• B29K 25/00 - Use of polymers of vinyl-aromatic compounds as moulding material
• B29K 311/10 - Natural fibres, e.g. wool, cotton
• B29L 31/10 - Building elements, e.g. bricks, blocks, tiles, panels, posts, beams

Goods & Services

Computer programmes and software, especially for cost calculation in the processing of plastics. Processing of plastics; Treatment of plastic materials to produce plastic mouldings; Treatment and processing of plastics; Treatment and processing of plastic mouldings; plastic recycling services.

Goods & Services

Plastic profiles (semi-finished goods), Especially, Plastic profiles [semi-finished goods] for insulating glazing systems for window and facade glazing; Plastic profiles for making metal and plastic composite structures. Distance pieces of plastic for the building sector; Building profiles of thermoplastic synthetic materials and expanded plastics. Processing and treatment services, in relation to the following goods: Profiles, Or plastic, of plastic; Coating services and Surface treatments, in relation to the following goods: Profiles, Or plastic, of plastic.

Goods & Services

Industrial chemicals, namely salt in powered form or in the form of pressed sheets for the manufacture of salt kernels for plastic injection moulding or compression moulding, salt kernels for plastic injection moulding or compression moulding. Custom manufacture of salt kernels for plastic injection moulding or compression moulding according to individual customer's specifications.

Goods & Services

Industrial chemicals, namely, salt in powdered form and in the form of pressed sheets for the manufacture of salt kernels for plastic injection molding and compression molding, and salt kernels for plastic injection molding and compression molding Custom manufacture of salt kernels for plastic injection molding and compression molding according to individual customer's specifications

Goods & Services

Electrical and electronic components; substrates [wafers] for the manufacture of electronic components, switches and microsystems, in particular in combination with laser direct structuring.

Goods & Services

Industrial chemicals, namely Salt in powered form or in the form of pressed sheets for the manufacture of salt kernels for plastic jet moulding or forming presses, salt kernels for plastic jet moulding or forming presses. Manufacture of salt kernels for plastic jet moulding or forming presses according to individual customer requirements.

Goods & Services

Electrical and electronic components in the nature of electric resistors, capacitors, diodes, transistors, electrical inductors, integrated circuits, electric sensors as part of micro-electro-mechanical systems (MEMS), electric sensors, circuit breakers, electrical fuses, electric switches, transformers, electric wires, electric cables, batteries, oscillators; synthetic polymer wafer substrates for use in the manufacture of electronic semiconductor components, electrical switches and microsystems in the nature of micro-electro-mechanical systems (MEMS), namely, electronic sensors packaged with integrated circuitry, all for use in laser direct structuring manufacturing processes

Goods & Services

Electrical and electronic components; Substrates [wafers] for the manufacture of electronic components, switches and microsystems, in particular in combination with laser direct structuring.

Abstract

The invention relates to a profiled plastic section (1) for a metal/plastic composite profiled section (31). The profiled plastic section (1) comprises a first profiled element (2) and at least one second profiled element (3). The first profiled element (2) and the second profiled element (3) together form a latching mechanism (4, 9; 5, 10; 6, 11), by means of which a form-fitting connection can preferably be produced between the first profiled element (2) and the second profiled element (3) in a width direction (x) and in a height direction (y). The first profiled element (2) and the second profiled element (3) overlap preferably over a large area when the form-fitting connection is produced between the first profiled element (2) and the second profiled element (3), and the form-fitting connection can be produced on the cross-sectional plane (x, y) between the first profiled element (2) and the second profiled element (3) by latching the profiled elements (2, 3) of the profiled plastic section (1). The form-fitting connection between the first profiled element (2) and the second profiled element (3) is designed such that a movement of the first profiled element (2) and the second profiled element (3) in a longitudinal direction (z) of the profiled plastic section (1) is allowed when a first metal component (29) is connected to the first profiled element (2) and a second metal component (30) is connected to the second profiled element (3) preferably in a shear-resistant manner. The profiled plastic section (1) can likewise also be designed with more than two profiled elements (2, 3), and the basic principle according to the invention of generating a shear-free plastic/metal composite profiled section (31) can be carried over.

IPC Classes  ?

• E06B 3/263 - Frames with special provision for insulation
• E06B 1/18 - Metal frames composed of several parts with respect to the cross-section of the frame itself
• E06B 1/28 - Hollow frames
• E06B 1/30 - Frames of plastics composed of several parts with respect to the cross-section of the frame itself

Abstract

A fiber-reinforced composite material (K), containing a thermoplastic polymer matrix and at least one natural-fiber component, is technically advantageous if it contains at least 45% (v/v) of a styrene (co)polymer (A) as polymer matrix, 30-55% (v/v) of a natural-fiber sheet material (B) as natural-fiber component, optionally 0-10% (v/v) of an additional polymer component (C), and optionally 0-10% of at least one additive (D), the volume percentages of components (A) to (D) adding up to 100 volume percent of the composite material (K).

IPC Classes  ?

• B32B 27/12 - Layered products essentially comprising synthetic resin next to a fibrous or filamentary layer
• B32B 5/02 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments
• B32B 5/26 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by the presence of two or more layers which comprise fibres, filaments, granules, or powder, or are foamed or specifically porous one layer being a fibrous or filamentary layer another layer also being fibrous or filamentary
• B32B 7/023 - Optical properties
• B32B 27/18 - Layered products essentially comprising synthetic resin characterised by the use of special additives
• B32B 27/30 - Layered products essentially comprising synthetic resin comprising vinyl resinLayered products essentially comprising synthetic resin comprising acrylic resin

Abstract

A spacer is provided that is shapable into a spacer frame, and during manufacture of an insulating glass unit, can be mounted on the glass panes. The spacer is formed having an inner surface, an outer surface and two lateral surfaces extending at either side of the spacer from the inner surface to the outer surface, and comprises a profiled body. The profiled body comprises two mutually spaced lateral faces running parallel to its longitudinal direction and a base body that extends between the lateral faces and has an outer and an inner face. The profiled body comprises at least in one part of its volume a quantity of particulate desiccant that is embedded in a plastics material. The spacer is coilable about an axis, perpendicularly to the lateral surfaces, and takes a flexurally rigid form in a plane perpendicular to the lateral surfaces.

IPC Classes  ?

• E06B 3/663 - Elements for spacing panes

Goods & Services

(1) Foils, plates, blocks, rods, hollow rods, profile rods, all of the afore-mentioned goods made of plastics and plastics composites, especially for applications in the field of medical technology and mechanical engineering.

Abstract

The invention relates to a spacer for insulated glass units, which can be easily transported, easily shaped to form a spacer frame, and easily but nevertheless precisely integrated into the glass units during production of the insulated glass unit. The spacer is designed with an inner surface, an outer surface and two side surfaces extending on either side of the spacer from the inner surface to the outer surface, and comprises a profile body. The profile body comprises two interspaced side faces running parallel to its longitudinal direction, and a main body running between the side faces and having an inner and an outer face. The profile body is produced from a plastics material and comprises, in at least some of its volume, a proportion of a particulate desiccant which is embedded in the plastics material. The spacer can be rolled up about an axis running perpendicularly to the side surfaces and is flexurally rigid on a plane running perpendicularly to the side surfaces.

IPC Classes  ?

• E06B 3/663 - Elements for spacing panes
• E06B 3/667 - Connectors therefor

Abstract

The invention relates to a spacer for insulated glass units, which can be easily transported, easily shaped to form a spacer frame, and easily but nevertheless precisely integrated into the glass units during production of the insulated glass unit. The spacer has a profile body running in a longitudinal direction, said profile body comprising a main body produced from a first plastics material and a separate desiccant body based on a second plastics material. The main body comprises two interspaced side faces, against which two parallel glass units lie when the insulated glass unit is assembled, the main body having an outer and an inner surface running between the side faces. The main body can be rolled up about an axis running perpendicularly to the side faces and is flexurally rigid on a plane running perpendicularly to the side faces. The desiccant body comprises a particulate desiccant which is embedded in the second plastics material.

IPC Classes  ?

• E06B 3/663 - Elements for spacing panes
• E06B 3/667 - Connectors therefor

Abstract

10 Ohm or less, and wherein at least one layer of the coating is configured as a film.

IPC Classes  ?

• B32B 7/12 - Interconnection of layers using interposed adhesives or interposed materials with bonding properties
• B05D 1/12 - Applying particulate materials
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind
• C08J 7/043 - Improving the adhesiveness of the coatings per se, e.g. forming primers
• C08J 7/044 - Forming conductive coatingsForming coatings having anti-static properties
• C08J 7/048 - Forming gas barrier coatings
• C08K 3/04 - Carbon

Goods & Services

Unprocessed artificial resins and unprocessed plastics, namely, compounded artificial resins and plastics suitable for further processing and shaping

Abstract

10 Ohm or less, and wherein the matrix polymer is selected such that it is compatible with the first polymer.

IPC Classes  ?

• C09D 177/06 - Polyamides derived from polyamines and polycarboxylic acids
• C08J 7/04 - Coating
• C08J 7/044 - Forming conductive coatingsForming coatings having anti-static properties
• C09D 5/24 - Electrically-conducting paints
• C09D 177/02 - Polyamides derived from omega-amino carboxylic acids or from lactams thereof
• C09D 177/10 - Polyamides derived from aromatically bound amino and carboxyl groups of amino carboxylic acids or of polyamines and polycarboxylic acids
• B05D 1/06 - Applying particulate materials
• B05D 3/00 - Pretreatment of surfaces to which liquids or other fluent materials are to be appliedAfter-treatment of applied coatings, e.g. intermediate treating of an applied coating preparatory to subsequent applications of liquids or other fluent materials
• B05D 7/02 - Processes, other than flocking, specially adapted for applying liquids or other fluent materials to particular surfaces or for applying particular liquids or other fluent materials to macromolecular substances, e.g. rubber
• C08J 7/043 - Improving the adhesiveness of the coatings per se, e.g. forming primers
• C08J 7/048 - Forming gas barrier coatings

Abstract

The present invention relates to a fibre composite material W of increased translucency and/or mechanical strength, comprising a copolymer C encompassing monomers A-1, where A-1 form covalent bonds with functional groups B-1 on the surface of fibres B embedded in the fibre composite material W, and this fibre composite material W has greater translucency and/or mechanical strength than a fibre composite material Win which the copolymer C contains no A-1. The present invention further embraces a method for producing a fibre composite material W of increased translucency and/or mechanical strength.

IPC Classes  ?

• C08K 7/14 - Glass
• C08L 25/12 - Copolymers of styrene with unsaturated nitriles
• C08L 25/08 - Copolymers of styrene
• C08J 5/08 - Reinforcing macromolecular compounds with loose or coherent fibrous material using pretreated fibrous materials glass fibres
• C03C 25/26 - Macromolecular compounds or prepolymers
• B32B 5/02 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments
• B32B 5/26 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by the presence of two or more layers which comprise fibres, filaments, granules, or powder, or are foamed or specifically porous one layer being a fibrous or filamentary layer another layer also being fibrous or filamentary
• B32B 19/02 - Layered products essentially comprising natural mineral fibres or particles, e.g. asbestos, mica bonded with or embedded in a plastic substance
• B32B 5/08 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments the fibres or filaments of a layer being specially arranged or being of different substances
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind
• C08L 25/14 - Copolymers of styrene with unsaturated esters

Goods & Services

Unprocessed artificial resins and unprocessed plastics, including compounded artificial resins and plastics suitable for further processing and shaping.

Goods & Services

(1) Unprocessed artificial resins and unprocessed plastics, including compounded artificial resins and plastics suitable for further processing and shaping.

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulate, prepregs and compounds. Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods, profile rods; goods made of plastics (semi-finished products), including plastic profiles, in particular for insulating glazing systems for window and façade glazing; plastic profiles for making composite structures of metal and plastic. Building materials and building elements (non-metallic); spacers of plastic for the building sector; building profiles of thermoplastic and foamed plastics.

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of powder, granulate and compounds, namely, pellets

Abstract

A method for producing insulating profiles comprises manufacturing a profile body and a first functional element separately, and the profile body and the first functional element are supplied to an ultrasonic welding device, wherein the profile body and the functional element are connected to one another by a material bond by formation of a welded joint. The profile body and the functional element are brought together into a predetermined first cross-sectional geometry during formation of the welded joint and are thereafter guided in this cross-sectional geometry until the plastics material of the welded joint solidifies to such an extent that the profile body and the first functional element are fixed in the predetermined cross-sectional geometry.

IPC Classes  ?

• E06B 3/273 - Frames with special provision for insulation with prefabricated insulating elements held in position by deformation of portions of the frame members
• B29C 65/08 - Joining of preformed partsApparatus therefor by heating, with or without pressure using ultrasonic vibrations
• E06B 3/26 - Compound frames, i.e. one frame within or behind another
• E06B 3/263 - Frames with special provision for insulation

Abstract

The invention proposes insulating profiles of a polymer material, and methods for producing the insulating profiles, are disclosed.

IPC Classes  ?

• E06B 3/263 - Frames with special provision for insulation
• B29C 65/48 - Joining of preformed partsApparatus therefor using adhesives
• E04B 1/74 - Heat, sound or noise insulation, absorption, or reflectionOther building methods affording favourable thermal or acoustical conditions, e.g. accumulating of heat within walls
• B29L 31/00 - Other particular articles

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of powder, granulate, prepregs and compounds.

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulate, prepregs and compounds Machines and machine tools for the processing and production of materials, in the nature of turning machines, computer numerical control (CNC) machines for processing materials, routing machines, machines for processing plastics and for metal working, machines for forming and swaging of plastics and metal, welding robots for industrial purposes, and structural parts and replacement parts of the aforementioned goods Medical apparatus and parts thereof, namely, surgical and medical instruments in the nature of surgical retractors and external fixators and surgical drilling guides; surgical and medical apparatus and instruments for use in orthopedic surgery; surgical apparatus and instruments for medical use; structural replacement parts of the aforementioned goods; the foregoing goods not including electroencephalographic EEG apparatuses, electromyographic EMG apparatuses, evoked potential EP apparatuses, sleep analyzers, or metal surgical implants Automobile parts, namely, undercarriage components in the nature of transverse control arms and ball joints; bicycles and parts therefor, in particular bicycle gears, bicycle change-speed gears, gearing parts and cranks Semi-finished products made of plastics and plastic composites in the form of coils, foils, plates, blocks, rods, hollow rods, profile rods; semi-finished products made of plastics, namely, plastic profiles for insulating glazing systems for window and façade glazing; semi-finished plastic profiles for making composite structures of metal and plastic Non-metallic building materials and building elements, namely, commercial window plastic insulating profiles Spacers of plastics for the building sector, namely, non-metal hardware in the nature of plastic thermal insulation profiles for window, door and facades; building profiles of thermo-plastic and foamed plastics, namely, non-metal profiles of thermoplastic and foamed plastics for arranging devices on and in walls, ceilings and other surfaces Material treatment of plastics by application of coatings, application of foils, application of paint covers, application of product markings by laser or embossing; processing of plastics in the production of moulded plastics; treatment and processing of plastics materials; treatment and processing of moulded plastics; recycling of plastics

Abstract

The invention relates to a profiled plastic section (1) for a metal/plastic composite profiled section (31). The profiled plastic section (1) comprises a first profiled element (2) and at least one second profiled element (3). The first profiled element (2) and the second profiled element (3) together form a latching mechanism (4, 9; 5, 10; 6, 11), by means of which a form-fitting connection can preferably be produced between the first profiled element (2) and the second profiled element (3) in a width direction (x) and in a height direction (y). The first profiled element (2) and the second profiled element (3) overlap preferably over a large area when the form-fitting connection is produced between the first profiled element (2) and the second profiled element (3), and the form-fitting connection can be produced on the cross-sectional plane (x, y) between the first profiled element (2) and the second profiled element (3) by latching the profiled elements (2, 3) of the profiled plastic section (1). The form-fitting connection between the first profiled element (2) and the second profiled element (3) is designed such that a movement of the first profiled element (2) and the second profiled element (3) in a longitudinal direction (z) of the profiled plastic section (1) is allowed when a first metal component (29) is connected to the first profiled element (2) and a second metal component (30) is connected to the second profiled element (3) preferably in a shear-resistant manner. The profiled plastic section (1) can likewise also be designed with more than two profiled elements (2, 3), and the basic principle according to the invention of generating a shear-free plastic/metal composite profiled section (31) can be carried over.

IPC Classes  ?

• E06B 3/263 - Frames with special provision for insulation
• E06B 1/18 - Metal frames composed of several parts with respect to the cross-section of the frame itself
• E06B 1/28 - Hollow frames
• E06B 1/30 - Frames of plastics composed of several parts with respect to the cross-section of the frame itself

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulate, prepregs and compounds. Machines and machine tools for the processing and production of materials, including welding robots, as well as parts of the aforementioned goods. Medical apparatus and parts thereof. Automobile parts, including undercarriage components, in particular transverse control arms and ball joints; bicycles and parts therefor, in particular gearing parts and cranks. Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods, profile rods; goods made of plastics (semi-finished products), including plastic profiles, in particular for insulating glazing systems for window and facade glazing; plastic profiles for making composite structures of metal and plastic. Building materials and building elements (non-metallic); spacers of plastic for the building sector; building profiles of thermoplastic and foamed plastics. Treatment of plastics; processing of plastics in the production of moulded plastics; treatment and processing of plastics materials; treatment and processing of moulded plastics; recycling of plastics.

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulate, prepregs and compounds. Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods, profile rods; goods made of plastics (semi-finished products), including plastic profiles, in particular for insulating glazing systems for window and façade glazing; plastic profiles for making composite structures of metal and plastic. Building materials and building elements (non-metallic); spacers of plastic for the building sector; building profiles of thermoplastic and foamed plastics.

Abstract

The present disclosure generally relates to a turning machine comprising a first spindle which can be set in rotation for gripping and rotating a first semi-finished product to be machined, in particular to be turned, and a second spindle which can be set in rotation and is likewise suitable for gripping and rotating a second semi-finished product to be machined. A first bar load magazine associated with the first spindle is configured to convey the first semi-finished product through a first opening of the first spindle into a machining area located between the spindles. A second bar load magazine associated with the second spindle may be configured to convey a second semi-finished product through a second opening of the second spindle into the machining area.

IPC Classes  ?

• B23B 13/04 - Arrangements for automatically conveying, chucking or guiding stock for turning machines for turning-machines with a plurality of working-spindles
• B23B 3/16 - Turret lathes for turning individually-chucked workpieces
• B23B 3/32 - Turning-machines with two or more working-spindles, e.g. in fixed arrangement for performing identical operations simultaneously on two or more workpieces

Goods & Services

Unprocessed plastics and plastic composites, in particular in the form of granulates, prepregs and compounds. Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods.

Abstract

The invention relates to a polymer-based substrate which is, in particular, electrostatically coatable, the substrate having a substrate main body produced using a polymer material, and a coating applied to a surface region of the substrate main body. The polymer material comprises a first polymer and the coating comprises a matrix polymer and an additive which is dispersed in the matrix polymer, reduces the surface resistance and is added in such a quantity that the specific surface resistance of the coating is approximately 1010 ohms or less. The matrix polymer is selected such that it is compatible with the first polymer.

IPC Classes  ?

• C08J 5/00 - Manufacture of articles or shaped materials containing macromolecular substances
• C08J 7/04 - Coating

Abstract

The invention relates to a polymer-based substrate, which can be coated in particular electrostatically, the substrate having a basic substrate body manufactured using a polymer material and a two-layer or multi-layer coating applied to a surface region of the basic substrate body. A first layer of the coating is formed as an adhesive layer and is arranged in contact with the surface region of the basic substrate body, and a second layer of the coating is formed as a paintable cover layer, at least one layer of the coating being produced as a layer having reduced surface resistance using a proportion of an electrically non-insulating material, such that a specific surface resistance of this layer of approximately 1010 Ohm or less results, and at least one layer of the coating is formed as a film.

IPC Classes  ?

• C08J 7/04 - Coating
• E06B 3/263 - Frames with special provision for insulation

Goods & Services

(1) Unprocessed plastics and plastic composites, in particular in the form of granulates, prepregs and compounds. (2) Goods made of plastics and plastic composites for general industrial and manufacturing use in the form of foils, plates, blocks, rods, hollow rods and profile rods.

Goods & Services

Goods made of plastics and plastic composites, namely, synthetic plastic as semi-finished products, in particular in the form of coils, plates, blocks, rods, hollow rods and profile rods; semi-processed plastics being plastic composites, in particular in the form of prepregs and compounds, namely, thermoplastic composite sheets containing glass fiber for use in the manufacture of other goods and thermoplastic compounds in pellet form for use in manufacturing in a wide variety of industries

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulates and compounds being pellets and powders Machines and machine tools for the processing and production of materials in the nature of turning machines, computer numerical control (CNC) machine for processing materials, routing machines, machines for processing plastics and for metal working, machines for forming and swaging of plastics and metal, welding robots for industrial purposes, and structural parts and replacement parts of the aforementioned goods Goods made of plastics and plastic composites, namely, synthetic plastic as semi-finished products, in particular in the form of coils, foils, plates, blocks, rods, hollow rods, profile rods; goods made of plastics, namely, synthetic plastic as semi-finished products in the form of plastic profiles, in particular for insulating glazing systems for window and facade glazing; synthetic plastic as semi-finished products in the form of plastic profiles for making composite structures of metal and plastic; semi-processed plastics being plastic composites, in particular in the form of polymer impregnated fibers, namely, thermoplastic composite sheets containing glass fiber for use in the manufacture of other goods; goods made of plastics, namely, non-metallic insulating materials for window plastic insulating profiles for use as building materials for heat-insulating applications; goods made of plastics, namely, plastic thermal insulation profiles, namely, plastic sections for use in the manufacture of spacer frames for windows, doors and facades for use as building materials for heat-insulating applications; goods made of plastics, namely, building profiles of thermoplastic and foamed plastics, namely, non-metal profiles of thermoplastic and foamed plastics for arranging devices on and in walls, ceilings and other surfaces for heat-insulating applications Material treatment services, namely, mill working services; treatment of materials, namely, application of product markings on plastics materials by laser beams or embossing

Goods & Services

(1) Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulate, prepregs and compounds; (2) Machines and machine tools for the processing and production of materials, namely, industrial robots, welding robots, packaging machines, processing machines, and parts therefor. (3) Automobile parts, namely, undercarriage components, in particular transverse control arms and ball joints; bicycles and parts therefor, in particular gearing parts and cranks. (4) Goods made of plastics and plastic composites for general industrial and manufacturing use in the form of foils, plates, blocks, rods, hollow rods and profile rods; goods made of plastics (semi-finished products), namely plastic profiles, in particular for insulating glazing systems for window and façade glazing; plastic profiles being plastic PVC tubes, rigid and flexible plastic rod, plastic angles and plastic pipes for making composite structures of metal and plastic. (5) Building materials and building elements (non-metallic) namely plastic and PVC wall panels and tiles, plastic and PVC flooring panels and tiles, plastic doors, plastic windows, plastic beams, and plastic columns; spacer brackets of plastic for the building sector; building profiles of thermoplastic and foamed plastics for windows, doors and plastic building façade panels. (1) Treatment of plastics for the manufacture of plastic goods for others.

Goods & Services

Unprocessed plastics and unprocessed plastic composites, in particular in the form of granulate, prepregs and compounds. Machines and machine tools for the processing and production of materials, including welding robots, as well as parts of the afore-mentioned goods. Medical apparatus and parts thereof. Automobile parts, including undercarriage components, in particular transverse control arms and ball joints; bicycles and parts therefor, in particular gearing parts and cranks. Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods, profile rods; goods made of plastics (semi-finished products), including plastic profiles, in particular for insulating glazing systems for window and facade glazing; plastic profiles for making composite structures of metal and plastic. Building materials and building elements (non-metallic); spacers of plastic for the building sector; building profiles of thermoplastic and foamed plastics. Material treatment.

Goods & Services

Machines and machine tools for the processing and production of materials, including welding robots, as well as parts of the afore-mentioned goods. Medical apparatus and parts thereof. Automobile parts, including undercarriage components, in particular transverse control arms and ball joints; bicycles and parts therefor, in particular gearing parts and cranks. Building materials and building elements (non-metallic); spacers of plastic for the building sector; building profiles of thermoplastic and foamed plastics.

Goods & Services

Machines and machine tools for the processing and production of materials, other than of foodstuff and edibles, including welding robots, as well as parts of the afore-mentioned goods. Medical apparatus and parts thereof.

Goods & Services

Medical apparatus and parts thereof; all aforementioned goods except for goods for use in medical analytics and diagnostics and except for goods in the field of physiotherapy and regeneration.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods of plastic and plastic composites (semi-finished products), in particular in the form of foils, sheets, blocks, rods, hollow rods and profiled rods. Processing of plastics; Treatment of plastic materials to produce plastic mouldings; Treatment and processing of plastics; Treatment and processing of plastic mouldings; Plastic recycling.

Goods & Services

Unprocessed plastics and plastic composites, in particular in the form of granulates, prepregs and compounds. Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Goods & Services

Goods made of plastics and plastic composites (semi-finished products), in particular in the form of foils, plates, blocks, rods, hollow rods and profile rods. Processing of plastics; treatment of plastic materials to produce plastic mouldings; treatment and processing of plastics; treatment and processing of plastic mouldings; recycling of plastics.

Abstract

The invention relates to insulation profiles made of a polymer material, in particular for the production of window, door and façade elements, and to methods for producing the insulation profiles which, even in the case of a complex geometry, can be manufactured in an economical manner.

IPC Classes  ?

• E06B 3/263 - Frames with special provision for insulation

Abstract

The invention relates to a method for producing a thermoplastic fibre composite containing a thermoplastic moulding compound (A) as a polymer-matrix (M), reinforcement fibres (B), and optionally additive (C). Said method comprises the following steps: i) flat structures (F) made from reinforcing fibres (B) treated with a silane sizing material are provided, ii) the flat structures (F) are placed in a thermoplastic molding compound (A) which comprises at least 0.3 mol %, with respect to components (A), of a chemically reactive functionality, iii) chemically reactive groups of the thermoplastic molding compound (A) are reacted in the polymer matrix (M) with the polar groups of the treated reinforcing fibres (B), iv) the at least one additive (C) is optionally incorporated v) cooling. Said method is particularly suitable for producing fibrous composites.

IPC Classes  ?

• C08K 7/00 - Use of ingredients characterised by shape
• C08J 5/08 - Reinforcing macromolecular compounds with loose or coherent fibrous material using pretreated fibrous materials glass fibres
• C08L 33/20 - Homopolymers or copolymers of acrylonitrile
• C08L 25/12 - Copolymers of styrene with unsaturated nitriles
• C08K 7/02 - Fibres or whiskers

Abstract

The invention relates to a turning machine (1), in particular a CNC turning machine, comprising a first spindle (2) which can be set in rotation for gripping and rotating a first semi-finished product (8) to be machined, in particular to be turned, and a second spindle (3) which can be set in rotation and is likewise suitable for gripping and rotating a second semi-finished product (9) to be machined, in particular to be turned. A first bar load magazine (4) associated with the first spindle (2) is configured to convey the first semi-finished product (8) through a first opening (6) of the first spindle (2) into a machining area (10) located between the spindles (2, 3). A second bar load magazine (5) associated with the second spindle (3) is configured, if necessary, to convey a second semi-finished product (9) through a second opening (7) of the second spindle (3) into the machining area (10).

IPC Classes  ?

• B23B 3/16 - Turret lathes for turning individually-chucked workpieces
• B23B 3/32 - Turning-machines with two or more working-spindles, e.g. in fixed arrangement for performing identical operations simultaneously on two or more workpieces
• B23B 13/04 - Arrangements for automatically conveying, chucking or guiding stock for turning machines for turning-machines with a plurality of working-spindles

Abstract

The invention relates to a method and a device (1) for the additive manufacturing of a three-dimensional object (2) from a high-temperature polymer material. The method comprises the steps of plasticating a high-temperature polymer material above the melting temperature (TS) of the high-temperature polymer material, and cooling the plasticated high-temperature plastic to a processing temperature (TV) which lies above a crystallization temperature (TK) of the high-temperature plastic and which lies below a permissible temperature maximum value (TL) of the critical device components within a device (1) for the additive manufacturing of the three-dimensional object (2) from the high-temperature polymer material or below the melting temperature (TS) of the high-temperature polymer material. This is followed by the additive manufacturing of the three-dimensional object (2) from the plasticated high-temperature polymer material cooled to the processing temperature. The device (1) is designed to carry out the method and, for this purpose, comprises means (3) for plasticating the high-temperature polymer material, means (4) for cooling the plasticated high-temperature polymer material and means (10) for conveying the melt of the high-temperature polymer material which has been cooled to the processing temperature (TV) into means (5) for the additive manufacturing of the three-dimensional object (2).

IPC Classes  ?

• B29C 64/106 - Processes of additive manufacturing using only liquids or viscous materials, e.g. depositing a continuous bead of viscous material
• B29C 64/20 - Apparatus for additive manufacturingDetails thereof or accessories therefor
• B33Y 70/00 - Materials specially adapted for additive manufacturing
• B33Y 10/00 - Processes of additive manufacturing
• B33Y 30/00 - Apparatus for additive manufacturingDetails thereof or accessories therefor

Abstract

The invention relates to a polyester-based polymer compound by means of which moulded bodies and particularly polyester films with increased heat conductivity of approx. 0.3 W m-1 K-1 or more can be produced, the films being at least uniaxially orientable and also having a dielectric strength of approx. 90 kV mm-1 or more according to DIN 40634 (at 23 °C and with alternating voltage (AC)). The polymer compound comprises a thermoplastic polyester and a first filler amounting to between approx. 7 and approx. 80 wt. %, in relation to the total weight of the compound, the first filler having a particle size distribution with a d50 value of between approx. 0.1 and approx. 15 μm, and the first filler comprising crystalline SiO2 and/or crystalline silicate, particularly selected from quartz, kyanite and cristobalite.

IPC Classes  ?

• C08K 3/34 - Silicon-containing compounds
• C08K 3/36 - Silica
• C08J 5/18 - Manufacture of films or sheets
• H01B 3/42 - Insulators or insulating bodies characterised by the insulating materials; Selection of materials for their insulating or dielectric properties mainly consisting of organic substances waxes polyesters, polyethers, polyacetal
• H01L 31/048 - Encapsulation of modules

Abstract

The invention relates to a method for producing thermoplastic fibre composites made from a thermoplastic matrix (M) comprising a thermoplastic moulding compound (A) and reinforcing fibres (B). Said method has technical advantages when it comprises the following steps: i) a flat structure (F) made of reinforcing fibres (B) is provided, ii) the flat structure (F) is introduced into a matrix M, iii) functional groups of the matrix are reacted with polar groups of the reinforcing fibres (B), iv) the fibre composite materials is consolidated.

IPC Classes  ?

• C08J 5/04 - Reinforcing macromolecular compounds with loose or coherent fibrous material
• C08J 5/08 - Reinforcing macromolecular compounds with loose or coherent fibrous material using pretreated fibrous materials glass fibres
• B32B 27/12 - Layered products essentially comprising synthetic resin next to a fibrous or filamentary layer
• B29C 70/08 - Fibrous reinforcements only comprising combinations of different forms of fibrous reinforcements incorporated in matrix material, forming one or more layers, with or without non-reinforced layers
• B32B 5/02 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments
• B32B 5/24 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by the presence of two or more layers which comprise fibres, filaments, granules, or powder, or are foamed or specifically porous one layer being a fibrous or filamentary layer
• B32B 5/26 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by the presence of two or more layers which comprise fibres, filaments, granules, or powder, or are foamed or specifically porous one layer being a fibrous or filamentary layer another layer also being fibrous or filamentary

Abstract

The invention relates to a profiled plastic section (1) for a metal/plastic composite profiled section (31). The profiled plastic section (1) comprises a first profiled element (2) and at least one second profiled element (3). The first profiled element (2) and the second profiled element (3) together form a latching mechanism (4, 9; 5, 10; 6, 11), by means of which a form-fitting connection can preferably be produced between the first profiled element (2) and the second profiled element (3) in a width direction (x) and in a height direction (y). The first profiled element (2) and the second profiled element (3) overlap preferably over a large area when the form-fitting connection is produced between the first profiled element (2) and the second profiled element (3), and the form-fitting connection can be produced on the cross-sectional plane (x, y) between the first profiled element (2) and the second profiled element (3) by latching the profiled elements (2, 3) of the profiled plastic section (1). The form-fitting connection between the first profiled element (2) and the second profiled element (3) is designed such that a movement of the first profiled element (2) and the second profiled element (3) in a longitudinal direction (z) of the profiled plastic section (1) is allowed when a first metal component (29) is connected to the first profiled element (2) and a second metal component (30) is connected to the second profiled element (3) preferably in a shear-resistant manner. The profiled plastic section (1) can likewise also be designed with more than two profiled elements (2, 3), and the basic principle according to the invention of generating a shear-free plastic/metal composite profiled section (31) can be carried over.

IPC Classes  ?

• E06B 3/273 - Frames with special provision for insulation with prefabricated insulating elements held in position by deformation of portions of the frame members
• E06B 3/263 - Frames with special provision for insulation

Goods & Services

Unprocessed plastics and unprocessed plastics composites, especially in the form of granulate, prepregs and compounds. Machines and machine tools for the processing and production of materials, including welding robots, as well as parts of the afore-mentioned goods. Medical apparatus and parts thereof. Automobile parts, including undercarriage components, especially transverse control arms and ball joints; bicycles and parts therefor, especially gearing parts and cranks. Foils, plates, blocks, rods, hollow rods, profile rods, all of the afore-mentioned goods made of plastics and plastics composites, especially for applications in the field of medical technology and mechanical engineering.

Abstract

The present invention relates to a fibre composite material W of increased translucency and/or mechanical strength, comprising a copolymer C encompassing monomers A-1, where A-1 form covalent bonds with functional groups B-1 on the surface of fibres B embedded in the fibre composite material W, and this fibre composite material W has greater translucency and/or mechanical strength than a fibre composite material Win which the copolymer C contains no A-1. The present invention further embraces a method for producing a fibre composite material W of increased translucency and/or mechanical strength.

IPC Classes  ?

• C08K 7/00 - Use of ingredients characterised by shape
• C08K 7/14 - Glass
• C08L 25/12 - Copolymers of styrene with unsaturated nitriles
• C08L 25/14 - Copolymers of styrene with unsaturated esters

Abstract

The aim of the invention is to provide a spacer for inslating glass panes which have a high heat transmission resistance while simultaneously being producible with reduced material costs. This is achieved in that the spacer for insulating glass panes comprises a profiled body which is produced using a first plastic material and which has a substantially U-shaped cross-section with first and second parallel lateral walls with a respective free end, an inner wall extending between the first and second lateral wall, and a steam diffusion barrier that extends from the free end of the first lateral wall to the free end of the second lateral wall and is made of a poorly heat-conducting flat material. The steam diffusion barrier is arranged substantially parallel to the inner wall and at a distance therefrom. The profiled body together with the steam diffusion barrier surrounds a cavity of the spacer, wherein the cavity can likewise receive a drying agent.

IPC Classes  ?

• E06B 3/663 - Elements for spacing panes

Abstract

The invention relates to a spacer for insulating glass panes, comprising a profiled body which has a substantially rectangular cross-section and which is designed as a closed profiled hollow section. The profiled body has a first and a second lateral wall which are arranged parallel to each other and at a distance from each other, an inner wall which extends between the first and the second lateral wall, and an outer wall which extends from the first to the second lateral wall and which is arranged at a distance from the inner wall. The outer wall comprises a first wall section, which is oriented substantially parallel to the inner wall, and second and third wall sections arranged on both sides of the first wall section, wherein the second and third wall sections are arranged at an obtuse angle relative to the first wall section and to the respective adjacent lateral wall when seen perpendicularly to the axial direction of the profiled body in the cross-section, and the second and third wall sections adjoin the respective adjacent lateral wall. At least the inner wall, the first and the second lateral wall, and the second and the third wall section of the outer wall are made of a first plastic material. The spacer further comprises a single-piece primary reinforcement element which extends from the first lateral wall to the second lateral wall over the outer wall and which is designed as a steam diffusion barrier. The aim of the invention is to improve the spacer such that the spacer can be deformed in particular in a cold bending method using conventional systems, offers a heat transmission resistance which is as high as possible, and furthermore can be produced in an economical manner. This is achieved in that the profiled body has a reduced wall thickness in order to form joint locations in the wall regions in which the second and the third wall section of the outer wall adjoin the first and the second lateral wall, respectively.

IPC Classes  ?

• E06B 3/663 - Elements for spacing panes

Goods & Services

Unprocessed plastics and unprocessed plastics composites, especially in the form of granulate, prepregs and compounds. Machines and machine tools for the processing and production of materials, including welding robots, as well as parts of the afore-mentioned goods. Medical apparatus and parts thereof. Automobile parts, including undercarriage components, especially transverse control arms and ball joints; bicycles and parts therefor, especially gearing parts and cranks. Foils, plates, blocks, rods, hollow rods, profile rods, all of the afore-mentioned goods made of plastics and plastics composites, especially for applications in the field of medical technology and mechanical engineering.

Abstract

A method for manufacturing insulating bars made from a thermoplastic material, comprising: producing a band-shaped extrudate having a substantially rectangular cross-section from the thermoplastic material; producing an individual insulating bar or a plurality of insulating bars from the band-shaped extrudate in the longitudinal direction thereof; and severing the insulating bar or bars arrangement in the longitudinal direction thereof to provide separated insulating bars.

IPC Classes  ?

• B29L 9/00 - Layered products
• B29C 43/06 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of definite length, i.e. discrete articles using movable moulds continuously movable
• B29C 43/22 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of indefinite length
• B29C 43/46 - Rollers
• B29C 47/00 - Extrusion moulding, i.e. expressing the moulding material through a die or nozzle which imparts the desired form; Apparatus therefor (extrusion blow-moulding B29C 49/04)
• B29C 47/06 - Multilayered articles
• B29L 31/00 - Other particular articles
• E06B 3/263 - Frames with special provision for insulation
• B29K 101/12 - Thermoplastic materials

Abstract

A method for manufacturing an insulating bar made from a thermoplastic plastics material whereof the base body has a corrugated structure comprises shaping the insulating bar as a blank having a substantially planar structure of the base body without raised portions and recesses but with the connection strips, cooling the blank to a temperature corresponding to the maximum long-term service temperature of the plastics material or lower, heating the base body to a forming temperature which, for crystalline plastics materials, is approximately 30° C. below the crystallite melting point of the plastics material or higher, and for amorphous plastics materials, is approximately 30° C. above the softening point or higher, forming the base body by a tool to produce the alternating raised portions and recesses, while retaining the geometry of the connection strips, and cooling the insulating bar to a temperature corresponding to the maximum long-term service temperature or lower.

IPC Classes  ?

• B29C 43/22 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of indefinite length
• B29C 70/50 - Shaping or impregnating by compression for producing articles of indefinite length, e.g. prepregs, sheet moulding compounds [SMC] or cross moulding compounds [XMC]
• B29D 99/00 - Subject matter not provided for in other groups of this subclass
• B29C 43/52 - Heating or cooling
• B29C 51/42 - Heating or cooling
• B29L 31/00 - Other particular articles
• E06B 3/277 - Frames with special provision for insulation with prefabricated insulating elements held in position by expansion of the insulating elements
• E06B 3/263 - Frames with special provision for insulation
• B29K 101/12 - Thermoplastic materials
• B29K 105/06 - Condition, form or state of moulded material containing reinforcements, fillers or inserts

Goods & Services

Plastics in extruded form for use in manufacture, including plastic profiles, in particular for insulating glazing systems for window and facade glazing. Building materials (non-metallic), including spacers of plastic for the building sector, building profiles of thermoplastic and foamed plastics, panes of glass for building purposes, building boards (not of metal), and concrete building elements; building materials (non-metallic), namely insulating roof coverings.

Abstract

A thermally insulating spacer profile (10) with improved thermal insulation is proposed. The spacer profile is produced from a plastics material and is particularly suitable for facade or glass roof constructions and window and door elements and comprises: a basic body which extends in a longitudinal direction of the spacer profile and has an outer contour which is substantially rectangular or trapezoidal in a cross section perpendicular to the longitudinal direction; wherein the basic body has a first and a second transverse wall (12, 14) which are connected to one another via a single side wall element (16) and held at a predetermined spacing h; wherein the side wall element terminates by a first end at a first edge region (22) of the first transverse wall and by a second end at a first edge region (24) of the second transverse wall; wherein the side wall element forms a path for thermal conduction from the first transverse wall to the second transverse wall, the length of which path corresponds approximately to 1.1 times the spacing h or more; and a strip-like anchoring projection (18) which is held on the first transverse wall and extends from the basic body in an opposite direction to the second transverse wall.

IPC Classes  ?

• E04B 2/96 - Curtain walls comprising panels attached to the structure through mullions or transoms

Abstract

For the cost-effective production of an insulating web (10) for composite profiles of a thermoplastic polymer material with a rib structure of the base body, it is proposed in a first step to form the insulating web as a blank with a substantially planar structure of the base body without elevations and depressions, but with the terminal strips (14, 16), and subsequently to cool it down to a temperature corresponding to the maximum continuous operating temperature of the polymer material or below, in a following step to heat the base body of the insulating web blank to a moulding temperature, which in the case of (partly) crystalline polymer materials is chosen to be about 30°C below the crystallite melting temperature of the polymer material or higher and in the case of amorphous polymer materials is chosen to be about 30°C above the softening temperature or higher, subsequently to mould the base body with a tool to produce the alternating elevations (26) and depressions (28), wherein the geometry of the terminal strips is obtained, and then to cool the insulating web down to a temperature corresponding to the maximum continuous operating temperature or below.

IPC Classes  ?

• B29C 47/00 - Extrusion moulding, i.e. expressing the moulding material through a die or nozzle which imparts the desired form; Apparatus therefor (extrusion blow-moulding B29C 49/04)
• B29C 43/22 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of indefinite length

Abstract

In order to be able to economically produce insulating webs for composite profiles made of a thermoplastic material in the dimensions and cross-sectional configurations that are required in each case, in particular including with a ripped structure of the basic body, it is proposed for a strip-like extrudate having a substantially rectangular cross section to be formed from the plastic material in a first step and for an insulating-web arrangement to be formed from the strip-like extrudate in a subsequent step, said insulating-web arrangement having the shape of an individual insulating web or having the shape of a plurality of contiguous insulating webs arranged in parallel alongside one another, and optionally for the insulating-web arrangement to be split in the longitudinal direction thereof into mutually separate insulating webs.

IPC Classes  ?

• B29C 43/22 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of indefinite length
• B29C 43/06 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of definite length, i.e. discrete articles using movable moulds continuously movable
• B29C 47/00 - Extrusion moulding, i.e. expressing the moulding material through a die or nozzle which imparts the desired form; Apparatus therefor (extrusion blow-moulding B29C 49/04)
• B29C 43/46 - Rollers
• B29C 43/48 - Endless belts
• E06B 3/263 - Frames with special provision for insulation

Abstract

The invention relates to a method to enable a permanent coating of molded bodies made of plastic by means of atmospheric plasma, which method comprises the following steps: producing a molded body of a composite material, which composite material comprises at least one thermoplastic polymer as a base material and at least boron nitride as an inorganic filler, wherein the volume fraction of the filler is 1-50% of the volume of the molded body, coating at least part of the molded body with the coating material by means of atmospheric plasma. The invention further relates to a component comprising a molded body having a coating material that can be produced according to the method according to the invention.

IPC Classes  ?

• C23C 4/08 - Metallic material containing only metal elements
• C23C 4/12 - Coating by spraying the coating material in the molten state, e.g. by flame, plasma or electric discharge characterised by the method of spraying
• C23C 4/02 - Pretreatment of the material to be coated, e.g. for coating on selected surface areas
• B29C 45/14 - Injection moulding, i.e. forcing the required volume of moulding material through a nozzle into a closed mouldApparatus therefor incorporating preformed parts or layers, e.g. injection moulding around inserts or for coating articles
• B29C 70/02 - Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts comprising combinations of reinforcements and fillers incorporated in matrix material, forming one or more layers, with or without non-reinforced or non-filled layers

Abstract

In order to provide a spacer for insulating‑glass units which, on the one hand, can be deformed by cold bending using conventional systems, but at the same time provides for the greatest possible level of thermal resistance, it is proposed that the spacer comprises a profile body which is made of a plastics material and has a substantially rectangular cross section with first and second side walls, which are arranged parallel to one another, and with an inner wall, which extends between the first and the second side walls, and an outer wall, which extends between the first and the second side walls, substantially parallel to the inner wall, and forms, with the profile body, a closed hollow profile, wherein a first wire‑form primary reinforcing element and a second wire‑form primary reinforcing element are arranged in the inner wall, parallel to the axial direction of the spacer profile, wherein the first primary reinforcing element is arranged in a first portion of the cross section of the profile body, in which the inner wall is adjacent to the first side wall, and wherein the second primary reinforcing element is arranged in a second portion of the cross section of the profile body, in which the inner wall is adjacent to the second side wall, such that the first and second primary reinforcing elements have not more than approximately 50% of their cross‑sectional surface area arranged in the first and the second side walls, respectively, and that the distance between the centres of gravity of the cross‑sectional surface areas of said reinforcing elements is approximately 40% of the distance between the side walls or more, but at least approximately 4 mm.

IPC Classes  ?

• E06B 3/663 - Elements for spacing panes

Goods & Services

Goods made of plastic materials (semi-finished products), including foils, plates, blocks, rods, pipes, hollow bars, sectional bars.

Goods & Services

Goods made of plastic materials (semi-finished products), including foils, plates, blocks, rods, pipes, hollow bars, profile bars.

Goods & Services

Plastics in extruded form for use in manufacture, including films, plates, blocks, rods, pipes, hollow rods, profile rods.

Goods & Services

Plastics in extruded form for use in manufacture, including films, plates, blocks, rods, pipes, hollow rods, profile rods.

Goods & Services

Unprocessed plastics, recycled plastics, compounded plastics, in particular being granules or milled material. Recycling and processing of plastics, for others. Technical and scientific consultancy with regard to the recycling and processing of plastics.

Goods & Services

Unprocessed plastics, recycled plastics, compounded plastics, in particular being granules or milled material. Recycling and processing of plastics, for others. Technical and scientific consultancy with regard to the recycling and processing of plastics.

Goods & Services

Goods made of plastic materials (semi-finished products), including foils, plates, blocks, rods, pipes, hollow bars, sectional bars.

Goods & Services

Goods made of plastic materials (semi-finished products), including foils, plates, blocks, rods, pipes, hollow bars, sectional bars.

Goods & Services

Goods made of plastic materials (semi-finished products), including foils, plates, blocks, rods, pipes, hollow bars, sectional bars.

Goods & Services

Goods made of plastic materials (semi-finished products), including foils, plates, blocks, rods, pipes, hollow bars, sectional bars.

Goods & Services

Plastics in extruded form for use in manufacture, including films, plates, blocks, rods, pipes, hollow rods, profile rods.

Goods & Services

Plastics in extruded form for use in manufacture, including films, plates, blocks, rods, pipes, hollow rods, profile rods.

Goods & Services

Plastics in extruded form for use in manufacture, including films, plates, blocks, rods, pipes, hollow rods, profile rods.

Goods & Services

Plastics in extruded form for use in manufacture, including films, plates, blocks, rods, pipes, hollow rods, profile rods.

Goods & Services

Sintered plastic parts for textile machinery, including bearings and sliding elements for textile machinery, bearings for transportation apparatus in textile washing machines; sintered plastic parts for manufacturing machinery in the field of the semiconductor industry, including test site holders, wafer pick-up tips, wafer supports for plasma etching apparatuses, thermal insulating parts for plasma burners, contact pads for wafer handling apparatuses, electrically insulating parts for chemical vapour deposition (CVD) apparatuses, parts for vacuum pumps, including piston rings; sintered plastic engine parts for the automotive industry, including fuel pump vanes, gear components, sliding frictional parts, sealing rings for automatic gears, thrust washers for automatic gears, bearings for peripheral engine components. Sintered plastic parts for the aviation and spacecraft industry, including bearings for foldable satellite parts, bearings for aircraft turbines, bearings for electric motors, electrically insulating parts for sensors, electrically insulating parts for electrical plugs, operating balls for hydraulic systems in helicopters, brake parts for aircrafts. Semi-processed plastics.

Goods & Services

[ Sintered plastic parts for textile machinery, namely, bearings and sliding elements being sliding rails, rollers, chain guides, slipper blocks, bushings, valve seats, friction rings, piston guides for textile machinery; machine parts, namely, bearings for transportation apparatus in textile washing machines; sintered plastic parts for manufacturing machinery in the field of the semiconductor industry, namely, test site holders, wafer pick-up tips, wafer supports for plasma etching apparatuses, contact pads for wafer handling apparatuses; parts for vacuum pumps, namely, piston rings, piston guides, pump vanes; bearings for aircraft turbines; bearings for electric motors; bearings for peripheral engine components; sintered plastic engine parts for the automotive industry, namely, fuel pump vanes; Sintered plastic parts for the aviation and spacecraft industry, namely, operating check balls for valves for hydraulic systems for motors and engines in helicopters, bearings for foldable satellite parts; gaskets, seal rings, bushings, slipper blocks, mechanical gears, piston rings and valve seats for vehicle engines; piston rings for shock absorber and actuators; sealings, namely, mechanical seals and gaskets and piston rings for compressors for air conditioners ] [ Semi-processed plastics; Sintered plastic parts for the aviation and spacecraft industry, namely, electrical insulators for sensors for land vehicles and aircraft, electrical insulators for electrical plugs for land vehicles and aircraft; Thermal insulators, namely, thermal insulating parts for plasma burners, electrical insulators, namely, electrically insulating parts for chemical vapor deposition (CVD) apparatuses ] Semi-processed plastics [ ; Sintered plastic parts for the aviation and spacecraft industry, namely, electrical insulators for sensors for land vehicles and aircraft, electrical insulators for electrical plugs for land vehicles and aircraft; Thermal insulators, namely, thermal insulating parts for plasma burners, electrical insulators, namely, electrically insulating parts for chemical vapor deposition (CVD) apparatuses ]

Goods & Services

Sintered plastic parts for textile machinery, including bearings and sliding elements for textile machinery, bearings for transportation apparatus in textile washing machines; sintered plastic parts for manufacturing machinery in the field of the semiconductor industry, including test site holders, wafer pick-up tips, wafer supports for plasma etching apparatuses, thermal insulating parts for plasma burners, contact pads for wafer handling apparatuses, electrically insulating parts for chemical vapour deposition (CVD) apparatuses, parts for vacuum pumps, including piston rings. Sintered plastic parts for the aviation and spacecraft industry, including bearings for foldable satellite parts, bearings for aircraft turbines, bearings for electric motors, electrically insulating parts for sensors, electrically insulating parts for electrical plugs, operating balls for hydraulic systems in helicopters, brake parts for aircrafts; sintered plastic engine parts for the automotive industry, including fuel pump vanes, gear components, sliding frictional parts, sealing rings for automatic gears, thrust washers for automatic gears, bearings for peripheral engine components. Semi-processed plastics.

Goods & Services

Goods made of plastics (semi-finished products), including plastic sections, in particular, for insulation glazing systems for window and façade glazings; roof insulation coverings. Building materials (not made of metal), including spacers made of plastic for the building sector, building sections made of thermoplastic and foamed plastic materials, roof insulation coverings, panes of glass for building purposes, building boards (not of metal), and concrete components. Technological services and research and design relating thereto; industrial analysis and research services.

Goods & Services

Goods made of plastics (semi-finished products), including plastic sections, in particular, for insulation glazing systems for window and façade glazings; roof insulation coverings. Building materials (not made of metal), including spacers made of plastic for the building sector, building sections made of thermoplastic and foamed plastic materials, roof insulation coverings, panes of glass for building purposes, building boards (not of metal), and concrete components. Technological services and research and design relating thereto; industrial analysis and research services.

Goods & Services

Unprocessed artificial resins and unprocessed plastics, including compounded artificial resins and plastics suitable for further processing and shaping.

Goods & Services

Foils; slabs, blocks, rods, pipes, hollow rods, profile rods; all the aforesaid goods being of plastic in extruded form for use in manufacture.

Goods & Services

Foils; slabs, blocks, rods, pipes, hollow rods, profile rods, being goods of plastic in extruded form for use in manufacture.