Owens Corning Intellectual Capital, LLC

États‑Unis d’Amérique

Retour au propriétaire

1-100 de 1 684 pour Owens Corning Intellectual Capital, LLC et 7 filiales Trier par
Recheche Texte
Affiner par
Type PI
        Brevet 969
        Marque 715
Juridiction
        États-Unis 829
        Canada 463
        International 283
        Europe 109
Propriétaire / Filiale
[Owner] Owens Corning Intellectual Capital, LLC 1 582
Paroc Group Oy 34
Owens Corning Canada LP 33
Thermafiber, Inc. 33
InterWrap Inc. 4
Voir plus
Date
Nouveautés (dernières 4 semaines) 21
2025 mars (MACJ) 8
2025 février 23
2025 janvier 7
2024 décembre 13
Voir plus
Classe IPC
E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture 79
E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois 70
E04B 1/76 - Isolation thermique ou acoustique, absorption ou réflexion de la chaleur ou du sonAutres méthodes de construction procurant des conditions thermiques ou acoustiques favorables, p. ex. par accumulation de chaleur à l'intérieur des murs spécifiquement relatives à la chaleur uniquement 69
E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux 68
B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments 60
Voir plus
Classe NICE
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler 301
19 - Matériaux de construction non métalliques 253
21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience 90
35 - Publicité; Affaires commerciales 41
24 - Tissus et produits textiles 37
Voir plus
Statut
En Instance 288
Enregistré / En vigueur 1 396
  1     2     3     ...     17        Prochaine page

1.

CURTAIN WALL INSULATION SYSTEM WITH IMPROVED INSULATION SEAM

      
Numéro d'application 18814838
Statut En instance
Date de dépôt 2024-08-26
Date de la première publication 2025-03-13
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s) Long, Jack

Abrégé

A system for insulating a curtain wall structure is provided. The system includes framing defined by vertically disposed and parallel mullions separated by a mullion distance; a first curtain wall insulation panel disposed within the framing and having a longitudinally extending indentation; and a second curtain wall insulation panel disposed within the framing and having a longitudinally extending protrusion. The curtain wall insulation panels are disposed within the framing such that the protrusion of the second panel is at least partially disposed within the indentation of the first panel. The panels can be comprised of mineral wool. The system has a flame rating of at least 2 hours, as measured in accordance with ASTM E2307. Also provided are an insulated curtain wall component that includes similar first and second curtain wall insulation panels and a curtain wall insulation panel suitable for use in the systems and components described herein.

Classes IPC  ?

  • E04B 1/76 - Isolation thermique ou acoustique, absorption ou réflexion de la chaleur ou du sonAutres méthodes de construction procurant des conditions thermiques ou acoustiques favorables, p. ex. par accumulation de chaleur à l'intérieur des murs spécifiquement relatives à la chaleur uniquement
  • E04B 1/80 - Éléments calorifuges en forme de dalles
  • E04B 1/94 - Protection contre d'autres agents indésirables ou dangers contre le feu
  • E04B 2/96 - Murs-rideaux comprenant des panneaux fixés à l'ossature par l'intermédiaire de montants ou de traverses

2.

AEROGEL COMPOSITE MATERIAL AND METHOD OF MANUFACTURING AEROGEL COMPOSITE MATERIAL, AND METHOD FOR TREATING AEROGEL POWDER

      
Numéro d'application CN2024117398
Numéro de publication 2025/051230
Statut Délivré - en vigueur
Date de dépôt 2024-09-06
Date de publication 2025-03-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL LLC (USA)
Inventeur(s)
  • Li, Zheng
  • Zhou, Shuqing
  • Que, Wenbin

Abrégé

An aerogel composite material comprises a porous fiber material and an aerogel powder distributed in the porous fiber material, wherein the aerogel powder undergoes pre-heat treatment; the pre-heat treatment temperature ranges from 300℃ to 600℃; the pre-heat treatment time is 30 minutes to 5 hours; and the preheated aerogel powder is impregnated in the porous fiber material by applying an alternating electric field to the porous fiber material. This technology can ensure that the porous fiber felt material is not damaged by high temperature, and due to the pre-heated treatment of the aerogel powder, the flame retardancy of the composite material is greatly enhanced, and the powder dropout of the aerogel is greatly improved.

Classes IPC  ?

  • C04B 38/08 - Mortiers, béton, pierre artificielle ou articles de céramiques poreuxLeur préparation par addition de substances poreuses
  • C04B 41/45 - Revêtement ou imprégnation

3.

AEROGEL COMPOSITE MATERIAL AND METHOD OF MANUFACTURING AEROGEL COMPOSITE MATERIAL

      
Numéro d'application US2024042206
Numéro de publication 2025/053969
Statut Délivré - en vigueur
Date de dépôt 2024-08-14
Date de publication 2025-03-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Li, Hongze
  • Li, Zheng
  • Yu, Qiuxia
  • Que, Wenbin

Abrégé

The present invention discloses an aerogel composite material and a preparation method thereof. The aerogel composite material comprises a porous fiber material and an aerogel powder distributed within the porous fiber material. The aerogel powder is impregnated into the porous fiber material by applying an alternating electric field to the porous fiber material. The aerogel powder is impregnated into the porous fiber materials by the alternating electric field. The aerogel powder has a large impregnation amount and is uniform such that the aerogel composite material has better thermal insulation properties, with simple process and low production cost.

Classes IPC  ?

  • B01J 13/00 - Chimie des colloïdes, p. ex. production de substances colloïdales ou de leurs solutions, non prévue ailleursFabrication de microcapsules ou de microbilles

4.

DOUBLE-SIDED COMPOSITE REINFORCED ROCKWOOL BOARD, PRODUCTION EQUIPMENT, AND PREPARATION METHOD

      
Numéro d'application US2024042203
Numéro de publication 2025/053968
Statut Délivré - en vigueur
Date de dépôt 2024-08-14
Date de publication 2025-03-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Wang, Haipo
  • Li, Yang
  • Shi, Chunming

Abrégé

The present disclosure provides a double-sided composite reinforced rockwool board, a production equipment, and a preparation method. The double-sided composite reinforced rockwool board has a length ranging from 600 mm to 2400 mm, a width ranging from 600 mm to 2400 mm, and a thickness ranging from 20 mm to 200 mm. The double-sided composite reinforced rockwool board comprises a rockwool base layer and two reinforced surface layers. The two reinforced surface layers are respectively bonded by a binder to two opposite surfaces of the rockwool base layer along a thickness direction. The 90° peel strength between any one of the two reinforced surface layers and the rockwool base layer ranges from 4N/75mm to 30N/75mm. By bonding the reinforced surface layer to the two surfaces of the rockwool base layer along the thickness direction through the binder, the double-sided composite reinforced rockwool board of the present disclosure is conducive to increasing the strength of the two surfaces of the rockwool base layer outwards along the thickness direction, thereby preventing the corresponding surfaces of the rockwool base layer from being damaged by friction in the process of transportation and construction, and improving the overall service life of the board.

Classes IPC  ?

  • B32B 5/26 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse un autre couche également étant fibreuse ou filamenteuse
  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • D04H 1/64 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs l'agent de liage étant appliqué à l'état humide, p. ex. agents chimiques en dispersion ou solution
  • E04B 1/80 - Éléments calorifuges en forme de dalles

5.

CURTAIN WALL INSULATION SYSTEM WITH IMPROVED INSULATION SEAM

      
Numéro d'application US2024043812
Numéro de publication 2025/054025
Statut Délivré - en vigueur
Date de dépôt 2024-08-26
Date de publication 2025-03-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Long, Jack

Abrégé

A system for insulating a curtain wall structure is provided. The system includes framing defined by vertically disposed and parallel mullions separated by a mullion distance; a first curtain wall insulation panel disposed within the framing and having a longitudinally extending indentation; and a second curtain wall insulation panel disposed within the framing and having a longitudinally extending protrusion. The curtain wall insulation panels are disposed within the framing such that the protrusion of the second panel is at least partially disposed within the indentation of the first panel. The panels can be comprised of mineral wool. The system has a flame rating of at least 2 hours, as measured in accordance with ASTM E2307. Also provided are an insulated curtain wall component that includes similar first and second curtain wall insulation panels and a curtain wall insulation panel suitable for use in the systems and components described herein.

Classes IPC  ?

  • E04B 1/61 - Assemblages pour les constructions du bâtiment en général d'éléments de construction en forme de plaques en contact mutuel
  • E04B 1/94 - Protection contre d'autres agents indésirables ou dangers contre le feu
  • E04B 2/96 - Murs-rideaux comprenant des panneaux fixés à l'ossature par l'intermédiaire de montants ou de traverses

6.

AEROGEL COMPOSITE MATERIAL AND METHOD OF MANUFACTURING AEROGEL COMPOSITE MATERIAL

      
Numéro d'application CN2024117405
Numéro de publication 2025/051234
Statut Délivré - en vigueur
Date de dépôt 2024-09-06
Date de publication 2025-03-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL LLC (USA)
Inventeur(s)
  • Yu, Qiuxia
  • Li, Hongze

Abrégé

The present invention discloses an aerogel composite material and a preparation method thereof. The aerogel composite material comprises a porous fiber material and an aerogel powder distributed within the porous fiber material. The aerogel powder is impregnated into the porous fiber material by applying an alternating electric field to the porous fiber material. The aerogel powder is impregnated into the porous fiber materials by the alternating electric field. The aerogel powder has a large impregnation amount and is uniform such that the aerogel composite material has better thermal insulation properties, with simple process and low production cost.

Classes IPC  ?

  • C04B 38/08 - Mortiers, béton, pierre artificielle ou articles de céramiques poreuxLeur préparation par addition de substances poreuses

7.

SUSTAINA

      
Numéro d'application 238364000
Statut En instance
Date de dépôt 2025-03-04
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

(1) Glass fiber veil or mat made from randomly dispersed glass fibers, wet or dry laid, and bonded into a thin sheet

8.

SUSTAINA

      
Numéro de série 99064380
Statut En instance
Date de dépôt 2025-03-03
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fiber veil or mat made from randomly dispersed glass fibers, wet or dry laid, and bonded into a thin sheet

9.

PACKAGING SYSTEM

      
Numéro d'application US2024043195
Numéro de publication 2025/042967
Statut Délivré - en vigueur
Date de dépôt 2024-08-21
Date de publication 2025-02-27
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Brandt, Luc
  • Dufresne, Elizabeth A.
  • Graham, John William
  • Potrony, Francisco Fernández
  • Obrin, Iii, Steve John

Abrégé

A package includes discrete units of a fibrous material (e.g., fiberglass rovings, carbon tows) that are positioned in multiple layers on a pallet, with each layer of the fibrous material units having a separator plate supported over it. According to this configuration, the package is able to deliver the fibrous material from each fibrous material unit at the same time. The fibrous material from the units on the pallet can be delivered to one or more fiber-requiring processes, such as a knitting process, a weaving process, a winding process, a chopping process, a pultrusion process, etc.

Classes IPC  ?

  • B65D 71/00 - Paquets d'objets maintenus ensemble par des éléments d'emballage pour la commodité du stockage ou du transport, p. ex. paquets compartimentés pour le transport à la main de plusieurs réceptacles tels que des boîtes de bière ou des bouteilles de boissons gazeusesBalles de matériaux
  • B65D 85/04 - Réceptacles, éléments d'emballage ou paquets spécialement adaptés à des objets ou à des matériaux particuliers pour des objets de forme annulaire pour bobines de fil métallique, cordes ou tuyaux souples

10.

ACOUSTICALLY ATTENUATING FASTENERS

      
Numéro d'application 18940947
Statut En instance
Date de dépôt 2024-11-08
Date de la première publication 2025-02-27
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Boona, Isabel N.
  • O'Leary, Robert J.
  • Taylor, Corey A.
  • Herreman, Kevin M.

Abrégé

A fastener for securing drywall to a framing member includes an elastomeric sleeve that reduces the transmission of sound through the drywall to the framing member and vice versa.

Classes IPC  ?

  • F16B 29/00 - Assemblage à vis avec déformation de l'écrou ou d'un organe auxiliaire pendant la fixation
  • E04B 1/82 - Isolation thermique ou acoustique, absorption ou réflexion de la chaleur ou du sonAutres méthodes de construction procurant des conditions thermiques ou acoustiques favorables, p. ex. par accumulation de chaleur à l'intérieur des murs spécifiquement relatives au son uniquement
  • F16B 43/00 - Rondelles ou dispositifs équivalentsAutres dispositifs de support pour têtes de boulons ou d'écrous

11.

COATED ROOFING MATERIALS

      
Numéro d'application 18942993
Statut En instance
Date de dépôt 2024-11-11
Date de la première publication 2025-02-27
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Schweiger, Scott
  • Verhoff, Jonathan
  • Gadley, Jesse

Abrégé

A roofing membrane is provided that includes at least one substrate at least partially impregnated with a first asphalt coating composition and a liquid parting agent emulsion applied to the upper surface of the asphalt-coated substrate. The liquid parting agent emulsion comprises one or more thermoplastic polymers and about 15 wt. % to about 40 wt. % of at least one mineral filler, based on the weight of the total solids in the emulsion. The first asphalt coating composition is free of oxidized asphalt.

Classes IPC  ?

  • C04B 41/63 - Composés macromoléculaires
  • C04B 14/42 - Verre
  • C04B 26/26 - Matières bitumineuses, p. ex. goudron, brai
  • C04B 41/00 - Post-traitement des mortiers, du béton, de la pierre artificielle ou des céramiquesTraitement de la pierre naturelle
  • C04B 41/45 - Revêtement ou imprégnation
  • C04B 41/48 - Composés macromoléculaires
  • C04B 111/00 - Fonction, propriétés ou utilisation des mortiers, du béton ou de la pierre artificielle
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois
  • E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux
  • E04D 5/02 - Couverture de toit utilisant des matériaux flexibles, p. ex. fournis en rouleaux utilisant des matériaux imprégnés avec des substances assurant l'étanchéité, p. ex. carton bitumé
  • E04D 5/12 - Couverture de toit utilisant des matériaux flexibles, p. ex. fournis en rouleaux spécialement modifiés, p. ex. perforés, à surface granuleuse, avec éléments d'appui attachés

12.

SHINGLE SEALING ARRANGEMENTS

      
Numéro d'application 18938446
Statut En instance
Date de dépôt 2024-11-06
Date de la première publication 2025-02-20
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Aschenbeck, David P.
  • Loftus, James E.
  • Vermilion, Donn R.
  • Grubka, Lawrence J.
  • Latorre, Carmen Anthony
  • Elliott, Bert W.
  • Kasprzak, Christopher
  • Harrington, Jr., Edward Richard
  • Wise, Christina Marie
  • Smith, William Edwin
  • Situ-Loewenstein, Shu
  • Verhoff, Jonathan M.
  • Barszcz, Benjamin
  • Ploense, David Michael

Abrégé

An exemplary shingle includes at least one coated shingle sheet defining a headlap portion and a tab portion each having opposed upper and lower surfaces. A first line of adhesive is adhered to one of the upper surface of the headlap portion and the lower surface of the tab portion, and includes a first thermally activated adhesive material. A second line of adhesive is adhered to one of the upper surface of the headlap portion and the lower surface of the tab portion, and includes a second thermally activated adhesive material having a minimum activation temperature less than a minimum activation temperature of the first thermally activated adhesive material.

Classes IPC  ?

  • E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/36 - Dispositifs d'étanchéité des espaces ou joints entre éléments de couverture

13.

RADONBARRIER

      
Numéro d'application 238132100
Statut En instance
Date de dépôt 2025-02-20
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

(1) Chemicals for use in the manufacture of polyurethanes, namely, polyurethane resin and isocyanate components for mixture to provide a cellular plastic foam structure (2) Spray foam insulation for building and construction; polyurethane foam insulation

14.

OC

      
Numéro d'application 019145257
Statut En instance
Date de dépôt 2025-02-19
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques
  • 22 - Cordes; filets; tentes, auvents, voiles et sacs; matières de rembourrage
  • 24 - Tissus et produits textiles
  • 35 - Publicité; Affaires commerciales

Produits et services

Insulating materials; Fiberglass insulation; Pipe insulation; Polystyrene insulation; Mineral wool for building insulation; Acoustic insulating panels; Acoustic insulating materials; Insulating coatings; Insulating tiles; Insulating fabrics; Insulating tapes; Insulation for air conditioners; Acoustical insulation barrier panels; Glass fibers for insulation; Insulation materials for aircraft; Insulation jackets for industrial pipes; Insulating waterproofing membranes; Electrical insulating materials; carbon fibers, not for textile use; Material for thermal insulation and fire protection, namely, fire-resistant composite panels made of aramid, glass, carbon or ceramic fibers; Plastic sheeting used in the construction industry as a vapor barrier; Weatherizing membranes and vapor barriers; Polyurethane film for use as a moisture barrier. Non-metal shingles; Roof flashing, not of metal; Roofing underlayment; Roofing fabrics; Non-metal roofing hips; Non-metal roofing panels; Non-metal roof vents for use in heating, cooling, and ventilation in residential and commercial buildings; roofing membranes; Non-metallic reinforcements for concrete and wood building construction, namely, plates, rods and bars; vinyl siding; bitumen asphalt; Non-metal doors; Non-metal door frames; Non-metal door panels; gypsum board; Non-metal door panels, namely, door lites, side lites and transom lites in the nature of glass and plastic panels which are sold for use as integral components of entry doors and door entranceways; Sound deadening gypsum wallboard; Drywall; Mold resistant drywall; Building materials, namely, synthetic boards for constructing decks, docks, and fences. Glass fibers for textile use; Carbon fibers for textile use; tarpaulins. Nonwoven fabrics of synthetic fibers; Glass fiber fabrics; Fiberglass reinforcement fabric for use in land, sea and aerospace applications; Carbon fiber fabrics for textile use. On-line wholesale and retail store services featuring building products and doors; Retail store services featuring building products and doors; Promoting the use of composite building materials; advertising, marketing and promotion services for others; Providing consumer product advice relating to building products and doors.

15.

OC

      
Numéro de série 99047334
Statut En instance
Date de dépôt 2025-02-19
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 22 - Cordes; filets; tentes, auvents, voiles et sacs; matières de rembourrage

Produits et services

Glass fibers for textile use; Carbon fibers for textile use; tarpaulins

16.

OC

      
Numéro de série 99047341
Statut En instance
Date de dépôt 2025-02-19
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 19 - Matériaux de construction non métalliques

Produits et services

Non-metal shingles; Roof flashing, not of metal; Roofing underlayment; Roofing fabrics; Non-metal roofing hips; Non-metal roofing panels; Non-metal roof vents for use in heating, cooling, and ventilation in residential and commercial buildings; roofing membranes; Non-metallic reinforcements for concrete and wood building construction, namely, plates, rods and bars; vinyl siding; bitumen asphalt; Non-metal doors; Non-metal door frames; Non-metal door panels; gypsum board; Non-metal door panels, namely, door lites, side lites and transom lites in the nature of glass and plastic panels which are sold for use as integral components of entry doors and door entranceways; Sound deadening gypsum wallboard; Drywall; Mold resistant drywall; Building materials, namely, synthetic boards for constructing decks, docks, and fences

17.

OC

      
Numéro de série 99047325
Statut En instance
Date de dépôt 2025-02-19
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 35 - Publicité; Affaires commerciales

Produits et services

On-line wholesale and retail store services featuring building products and doors; Retail store services featuring building products and doors; Promoting the use of composite building materials; advertising, marketing and promotion services for others; Providing consumer product advice relating to building products and doors

18.

OC

      
Numéro de série 99047330
Statut En instance
Date de dépôt 2025-02-19
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 24 - Tissus et produits textiles

Produits et services

Nonwoven fabrics of synthetic fibers; Glass fiber fabrics; Fiberglass reinforcement fabric for use in land, sea and aerospace applications; Carbon fiber fabrics for textile use

19.

OC

      
Numéro de série 99047345
Statut En instance
Date de dépôt 2025-02-19
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Insulating materials; Fiberglass insulation; Pipe insulation; Polystyrene insulation; Mineral wool for building insulation; Acoustic insulating panels; Acoustic insulating materials; Insulating coatings; Insulating tiles; Insulating fabrics; Insulating tapes; Insulation for air conditioners; Acoustical insulation barrier panels; Glass fibers for insulation; Insulation materials for aircraft; Insulation jackets for industrial pipes; Insulating waterproofing membranes; Electrical insulating materials; carbon fibers, not for textile use; Material for thermal insulation and fire protection, namely, fire-resistant composite panels made of aramid, glass, carbon or ceramic fibers; Plastic sheeting used in the construction industry as a vapor barrier; Weatherizing membranes and vapor barriers; Polyurethane film for use as a moisture barrier

20.

SOLAR REFLECTIVE POLYMER-BASED GRANULES

      
Numéro d'application 18723687
Statut En instance
Date de dépôt 2023-01-20
Date de la première publication 2025-02-13
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Abadeer, Nardine
  • Smith, William

Abrégé

Solar reflective polymer-based granules are disclosed. Each of the solar reflective polymer-based granules includes a powder mixture including at least one functional pigment and a functional mineral filler and a polymer carrier extruded with the powder mixture. The at least one functional pigment is selected from the group consisting of an inorganic pigment, a white pigment, an infrared reflective pigment, and mixtures thereof. In various embodiments, the functional mineral filler is present in the polymer-based granules in an amount of from about 5 wt. % to about 80 wt. %, based on a total weight of the polymer-based granules. The resultant polymer-based granules have a solar reflectivity of greater than or equal to 8% when measured using a solar reflectometer.

Classes IPC  ?

  • C04B 20/00 - Emploi de matières comme charges pour mortiers, béton ou pierre artificielle prévu dans plus d'un groupe et caractérisées par la forme ou la répartition des grainsTraitement de matières spécialement adapté pour renforcer leur propriétés de charge dans les mortiers, béton ou pierre artificielle prévu dans plus d'un groupe de Matières expansées ou défibrillées
  • C04B 111/80 - Propriétés optiques, p. ex. transparence
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois

21.

SHAPEABLE FABRIC

      
Numéro d'application EP2024071748
Numéro de publication 2025/031916
Statut Délivré - en vigueur
Date de dépôt 2024-07-31
Date de publication 2025-02-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Jouannaux, Julien
  • Boucard, Nadege

Abrégé

Herein is described a shapeable fabric comprising: first fibers comprising glass fibers oriented in a first direction; second fibers comprising glass fibers oriented in a second direction; and an intermingled stitching yarn (1) comprising a plurality of infusion filaments (4) and a plurality of shaping filaments (2) that are intermingled, wherein the second direction is within 0 to 90 degrees of the first direction, and the intermingled stitching yarn (1) forms a stitching pattern through the shapeable fabric and maintains the first and second fibers in their respective orientations, and wherein the shaping filaments (2) have a melting point of less than about 150 °C, and the infusion filaments (4) have a melting point of at least about 180 °C.

Classes IPC  ?

  • D04B 21/16 - Tissus caractérisés par l'incorporation par tricotage de fils de renforcement, de fils de liage ou de fils décoratifs, dans un ou plusieurs fils, nappe ou couche de tissuTricots incorporant de petits éléments auxiliaires, p. ex. à des fins décoratives incorporant des fils synthétiques
  • B29C 70/44 - Façonnage ou imprégnation par compression pour la fabrication d'objets de longueur définie, c.-à-d. d'objets distincts utilisant une pression isostatique, p. ex. moulage par différence de pression, avec un sac à vide, dans un autoclave ou avec un caoutchouc expansible
  • B29C 70/54 - Parties constitutives, détails ou accessoiresOpérations auxiliaires
  • B29C 70/22 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts comprenant uniquement des renforcements, p. ex. matières plastiques auto-renforçantes des renforcements fibreux uniquement caractérisées par la structure des renforcements fibreux utilisant des fibres de grande longueur, ou des fibres continues orientées dans au moins deux directions formant une structure bidimensionnelle
  • B29L 31/08 - Pales pour rotors, stators, ventilateurs, turbines ou dispositifs analogues, p. ex. hélices

22.

OCFIBER

      
Numéro de série 99032246
Statut En instance
Date de dépôt 2025-02-07
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ?
  • 24 - Tissus et produits textiles
  • 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fiber fabrics; Fiberglass reinforcement fabric for use in land, sea and aerospace applications; Carbon fiber fabrics for textile use; non-woven fabrics of synthetic fibers; Glass fabric for textile purposes Glass fibers and glass fiber rovings for non-textile purposes; Glass, unworked or semi-worked, except building glass; Glass fibers for reinforcing plastics; Glass fabrics for industrial use; Unworked or semi-worked glass, namely, glass fibers, glass fiber strands, glass fiber chopped strands and glass fiber rovings, for use as a reinforcement and all for use as materials in further manufacture; glass fibers for non-textile purposes

23.

PALETTE OF POSSIBILITIES

      
Numéro de série 99032349
Statut En instance
Date de dépôt 2025-02-07
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 19 - Matériaux de construction non métalliques

Produits et services

Non-metal shingles

24.

OCGLASS

      
Numéro de série 99032244
Statut En instance
Date de dépôt 2025-02-07
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ?
  • 24 - Tissus et produits textiles
  • 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fiber fabrics; Fiberglass reinforcement fabric for use in land, sea and aerospace applications; Carbon fiber fabrics for textile use; non-woven fabrics of synthetic fibers Glass fabric for textile purposes Glass fibers and glass fiber rovings for non-textile purposes; Glass, unworked or semi-worked, except building glass; Glass fibers for reinforcing plastics; Glass fabrics for industrial use; Unworked or semi-worked glass, namely, glass fibers, glass fiber strands, glass fiber chopped strands and glass fiber rovings, for use as a reinforcement and all for use as materials in further manufacture; glass fibers for non-textile purposes

25.

PALETTE OF POSSIBILITIES

      
Numéro d'application 237885700
Statut En instance
Date de dépôt 2025-02-07
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 19 - Matériaux de construction non métalliques

Produits et services

(1) Roofing shingles

26.

OCGLASS

      
Numéro d'application 019139570
Statut En instance
Date de dépôt 2025-02-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 24 - Tissus et produits textiles

Produits et services

Glass fibers and glass fiber rovings for non-textile purposes; Glass, unworked or semi-worked, except building glass; Glass fibers for reinforcing plastics; Glass fabrics for industrial use; Unworked or semi-worked glass, namely, glass fibers, glass fiber strands, glass fiber chopped strands and glass fiber rovings, for use as a reinforcement and all for use as materials in further manufacture.. Glass fiber fabrics; Fiberglass reinforcement fabric for use in land, sea and aerospace applications; Carbon fiber fabrics for textile use; non-woven fabrics of synthetic fibers; Glass fabric for textile purposes..

27.

FIBROUS SOIL AMENDMENT TO PROMOTE AGRICULTURAL CROP OR PLANT GROWTH

      
Numéro d'application 18783568
Statut En instance
Date de dépôt 2024-07-25
Date de la première publication 2025-02-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s) Wolf, David H.

Abrégé

Systems for and methods of using glass fibers as a soil-based additive to enhance crop and plant growth are disclosed. By replacing a volumetric portion of the soil with the fibers, the plant-available water (PAW) of the amended soil is increased.

Classes IPC  ?

  • C09K 17/04 - Substances pour conditionner ou stabiliser les sols contenant uniquement des composés inorganiques appliqués sous une forme physique autre qu'une solution ou un coulis, p. ex. sous forme de granulés ou de gaz
  • C03C 3/062 - Compositions pour la fabrication du verre contenant de la silice avec moins de 40% en poids de silice
  • C03C 3/083 - Compositions pour la fabrication du verre contenant de la silice avec 40 à 90% en poids de silice contenant de l'oxyde d'aluminium ou un composé du fer
  • C03C 13/00 - Compositions pour fibres ou filaments de verre
  • C09K 17/08 - Composés de l'aluminium, p. ex. hydroxyde d'aluminium
  • D04H 1/4218 - Fibres de verre
  • D04H 1/4382 - Fibres obtenues par étirage de film réticuléFibres compositesFibres mixtesFibres ultrafinesFibres pour cuir artificiel
  • D04H 1/44 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles les voiles ou couches étant renforcées par des moyens mécaniques, p. ex. par roulage
  • D04H 1/58 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs

28.

FIBROUS SOIL AMENDMENT TO PROMOTE AGRICULTURAL CROP OR PLANT GROWTH

      
Numéro d'application US2024039465
Numéro de publication 2025/029563
Statut Délivré - en vigueur
Date de dépôt 2024-07-25
Date de publication 2025-02-06
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Wolf, David H.

Abrégé

Systems for and methods of using glass fibers as a soil-based additive to enhance crop and plant growth are disclosed. By replacing a volumetric portion of the soil with the fibers, the plant-available water (PAW) of the amended soil is increased.

Classes IPC  ?

  • C09K 17/04 - Substances pour conditionner ou stabiliser les sols contenant uniquement des composés inorganiques appliqués sous une forme physique autre qu'une solution ou un coulis, p. ex. sous forme de granulés ou de gaz
  • C05G 3/80 - Conditionneurs de sol

29.

OCFIBER

      
Numéro d'application 019139607
Statut En instance
Date de dépôt 2025-02-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 24 - Tissus et produits textiles

Produits et services

Glass fibers and glass fiber rovings for non-textile purposes; Glass, unworked or semi-worked, except building glass; Glass fibers for reinforcing plastics; Glass fabrics for industrial use; Unworked or semi-worked glass, namely, glass fibers, glass fiber strands, glass fiber chopped strands and glass fiber rovings, for use as a reinforcement and all for use as materials in further manufacture.. Glass fiber fabrics; Fiberglass reinforcement fabric for use in land, sea and aerospace applications; Carbon fiber fabrics for textile use; non-woven fabrics of synthetic fibers; Glass fabric for textile purposes..

30.

SHINGLE WITH REINFORCED NAIL ZONE AND METHOD OF MANUFACTURING

      
Numéro d'application 18922865
Statut En instance
Date de dépôt 2024-10-22
Date de la première publication 2025-02-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Belt, James S.
  • Elliott, Bert W.

Abrégé

A method of making a laminated shingle is provided. The method includes coating a shingle mat with roofing asphalt to make an asphalt-coated sheet, adhering a reinforcement member to a portion of the asphalt-coated sheet, covering the asphalt-coated sheet, and optionally covering the reinforcement member, with granules to make a granule-covered sheet, dividing the granule-covered sheet into an overlay sheet and an underlay sheet, wherein the overlay sheet has a tab portion normally exposed on a roof and a headlap portion normally covered-up on a roof, the headlap portion having a lower zone adjacent the tab portion and an upper zone adjacent the lower zone, and wherein the reinforcement member is adhered to the lower zone of the headlap portion and laminating the overlay sheet and the underlay sheet to make the laminated shingle.

Classes IPC  ?

  • B65G 57/02 - Empilage d'objets en ajoutant les objets au sommet de la pile
  • B32B 3/10 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche discontinue, c.-à-d. soit continue et percée de trous, soit réellement constituée d'éléments individuels
  • B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 5/26 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse un autre couche également étant fibreuse ou filamenteuse
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 11/02 - Produits stratifiés composés essentiellement des substances bitumineuses ou à base de goudron avec des fibres ou particules enrobées dans ces substances ou liées à ces substances
  • B32B 11/10 - Produits stratifiés composés essentiellement des substances bitumineuses ou à base de goudron adjacentes à une couche fibreuse ou filamenteuse
  • B32B 37/12 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par l'usage d'adhésifs
  • B32B 37/15 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui est fabriquée et immédiatement stratifiée avant d'atteindre un état stable, p. ex. dans lesquels une couche est extrudée et stratifiée à l'état semi-pâteux
  • B32B 37/20 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de bandes continues
  • B32B 37/24 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui ne présente pas de cohésion avant la stratification, p. ex. constituée de matériau granulaire projeté sur un substrat
  • B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
  • B32B 38/10 - Enlèvement de couches ou de parties de couches, mécaniquement ou chimiquement
  • B65B 5/06 - Emballage de groupes d'objets, chaque groupe étant traité comme un seul objet
  • E04B 1/66 - Étanchéités
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux
  • E04D 1/28 - Éléments de couvertures comprenant plusieurs couches, p. ex. pour l’isolation
  • E04D 1/34 - Attaches pour la fixation des éléments de couverture à leurs supports

31.

PIPE LINER

      
Numéro d'application EP2024071750
Numéro de publication 2025/027108
Statut Délivré - en vigueur
Date de dépôt 2024-07-31
Date de publication 2025-02-06
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Falzi, Vivien

Abrégé

Herein is described a cure in place pipe liner comprising a CIPP fabric, the CIPP fabric comprising: first fibers comprising continuous glass fibers, the first fibers oriented in a first direction, the first direction being along the length of the fabric; second fibers comprising continuous glass fibers, the second fibers oriented in a second direction, the second direction being substantially perpendicular to the first direction; and a chopped strand mat layer comprising randomly oriented chopped glass fiber strands, wherein the first fibers constitute at least about 10 wt.% of the total fiber weight of the fabric, and the chopped glass fiber strands constitute at least about 30 wt.% of the total fiber weight of the fabric.

Classes IPC  ?

  • B32B 1/08 - Produits tubulaires
  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 5/26 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse un autre couche également étant fibreuse ou filamenteuse
  • F16L 55/162 - Dispositifs pour aveugler les fuites dans les tuyaux ou manches à partir de l'intérieur du tuyau
  • B32B 7/09 - Liaison entre couches par des moyens mécaniques par couture, aiguilletage ou piqûre
  • B32B 5/06 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments caractérisés par une couche fibreuse imbriquée ou cousue avec une autre couche, p. ex. de fibres, de papier

32.

CURTAIN WALL INSULATION SYSTEM

      
Numéro d'application 18914397
Statut En instance
Date de dépôt 2024-10-14
Date de la première publication 2025-01-30
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Long, Jack
  • Ogino, Angela
  • Szajna, Michael

Abrégé

A system for insulating a curtain wall structure is disclosed. The system includes a plurality of insulation hangers, a curtain wall insulation, and a safing insulation. The insulation hangers include a reinforcing member that engages a horizontal transom of the curtain wall structure. The system is attached only to horizontal transoms of the curtain wall structure via the insulation hangers to provide ease of installation and/or enhanced reliability.

Classes IPC  ?

  • E04B 2/96 - Murs-rideaux comprenant des panneaux fixés à l'ossature par l'intermédiaire de montants ou de traverses

33.

APPARATUS FOR WINDING FILAMENTS OR STRANDS

      
Numéro d'application US2024038463
Numéro de publication 2025/019627
Statut Délivré - en vigueur
Date de dépôt 2024-07-18
Date de publication 2025-01-23
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Vaquant, Emmanuel
  • Font, Pierre-Jacques

Abrégé

A strand guide (302) for comingling fiber strands (310). The strand guide includes a first comingling member or strand engaging member (304) extending from the strand guide and a second comingling member or strand engaging member (306) extending from the strand guide wherein the first comingling member includes a first pair of teeth (314) defining a first groove (316) between the first pair of teeth, wherein the second comingling member includes a second pair of teeth (344) defining a second groove (346) between the second pair of teeth, and wherein the first and second pairs of teeth are at least partially offset from one another along a length of the strand guide.

Classes IPC  ?

  • B65H 54/28 - Dispositifs de va-et-vientDispositions pour la mise en forme des paquets
  • B65H 57/02 - Tiges ou plaques fixes
  • B65H 57/04 - Fentes ou rainures avec surfaces de guidage
  • B65H 57/16 - Guides pour matériau filiformeSupports à cet effet de forme particulière pour maintenir une multitude de fils en un rapport espacé

34.

RECYCLED MATERIAL PELLETS

      
Numéro d'application EP2024068859
Numéro de publication 2025/012076
Statut Délivré - en vigueur
Date de dépôt 2024-07-04
Date de publication 2025-01-16
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Vieille, Martin

Abrégé

Herein is described a recycled material pellet comprising: shredded glass fiber waste material comprising glass fibers and a thermoplastic binder; wherein the thermoplastic binder constitutes at least about 2 wt.% of the recycled material pellet.

Classes IPC  ?

  • B29B 9/14 - Renforcement par des fibres
  • B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques

35.

ALGAE RESISTANT POLYMER-BASED GRANULES FOR ASPHALT SHINGLES

      
Numéro d'application US2024035596
Numéro de publication 2025/014649
Statut Délivré - en vigueur
Date de dépôt 2024-06-26
Date de publication 2025-01-16
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Abadeer, Nardine Said
  • Click, Kevin Andrew
  • Smith, William Edwin

Abrégé

Various embodiments described herein are directed algae resistant polymer-based granules and uses thereof. In various embodiments presented herein, the polymer-based granules include an algaecide, a biocide, a fungicide, an antimicrobial compound, or a mixture thereof in combination with a polymer carrier and, optionally, a filler. The resultant polymer-based granules include a precise balance between polymer carrier, filler, and functional additive to achieve a particular leach rate of the functional additive after 3000 hours of aging according to ASTM D4798.

Classes IPC  ?

36.

ALGAE RESISTANT POLYMER-BASED GRANULES FOR ASPHALT SHINGLES

      
Numéro d'application 18755013
Statut En instance
Date de dépôt 2024-06-26
Date de la première publication 2025-01-16
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Abadeer, Nardine Said
  • Click, Kevin Andrew
  • Smith, William Edwin

Abrégé

Various embodiments described herein are directed algae resistant polymer-based granules and uses thereof. In various embodiments presented herein, the polymer-based granules include an algaecide, a biocide, a fungicide, an antimicrobial compound, or a mixture thereof in combination with a polymer carrier and, optionally, a filler. The resultant polymer-based granules include a precise balance between polymer carrier, filler, and functional additive to achieve a particular leach rate of the functional additive after 3000 hours of aging according to ASTM D4798.

Classes IPC  ?

  • C08J 3/12 - Pulvérisation ou granulation
  • C08K 3/22 - OxydesHydroxydes de métaux
  • C08K 3/26 - CarbonatesBicarbonates
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois

37.

A BONDED NON-WOVEN FIBROUS MAT

      
Numéro d'application US2024037503
Numéro de publication 2025/015121
Statut Délivré - en vigueur
Date de dépôt 2024-07-11
Date de publication 2025-01-16
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Ugorek, Michael

Abrégé

The present invention provides a bonded non-woven fibrous mat, the bonded non-woven fibrous mat comprising: (a) a precursor mat comprising: a non-woven web of fibers comprising a blend of glass fibers and polyester fibers, and a first binder; and (b) a composition which substantially or completely impregnates the precursor mat, the composition comprising: a second binder, and a filler; wherein: the first binder is selected from the group consisting of a polycarboxylic acid binder, a polyvinyl alcohol binder, or a combination thereof; and the second binder is a polycarboxylic acid binder which is prepared from an unsaturated carboxylic acid compound and an aryl vinyl compound; provided the bonded non-woven fibrous mat does not comprise a filler which is calcium carbonate. The invention also provides methods for manufacturing the bonded non-woven fibrous mat, as well as a construction board comprising the bonded non-woven fibrous mat, in particular, a ceiling tile. The invention also relates to a fluid filter comprising the bonded non-woven fibrous mat, the use of the fluid filter in air or liquid filtration, and a filtration process.

Classes IPC  ?

  • D04H 1/4218 - Fibres de verre
  • D04H 1/435 - Polyesters
  • D04H 1/587 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs caractérisé par les agents de liage utilisés
  • D04H 1/64 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs l'agent de liage étant appliqué à l'état humide, p. ex. agents chimiques en dispersion ou solution
  • D04H 1/732 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes caractérisés par la méthode de formation des voiles ou couches, p. ex. par la réorientation des fibres les fibres étant disposées au hasard par courant de fluide, p. ex. flux d'air
  • B01D 39/16 - Autres substances filtrantes autoportantes en substance organique, p. ex. fibres synthétiques
  • E04B 9/04 - PlafondsStructure des plafonds, p. ex. faux plafondsStructure des plafonds en ce qui concerne l'isolation comprenant des dalles, des feuilles ou similaires
  • E04C 2/26 - Éléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés composés de matériaux couverts par plusieurs des groupes , , ou de matériaux couverts par un de ces groupes avec un matériau non spécifié dans l'un de ces groupes

38.

APPARATUSES FOR AND METHODS OF MEASURING THERMAL CONDUCTIVITY

      
Numéro d'application US2024035506
Numéro de publication 2025/010171
Statut Délivré - en vigueur
Date de dépôt 2024-06-26
Date de publication 2025-01-09
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Frysinger, Clinton, Todd

Abrégé

An apparatus for and method of measuring thermal conductivity of a material includes opposed and parallel plates with a gap therebetween for receiving the material. A plate varies a temperature of the material to a predetermined temperature. A linear actuator varies the gap to compress the material to a predetermined load and/or a predetermined thickness. A position sensor is configured to measure a position of the linear actuator. A heat flux sensor measures a heat flux while the material is at the predetermined temperature and at the predetermined load and/or the predetermined thickness.

Classes IPC  ?

  • G01N 25/18 - Recherche ou analyse des matériaux par l'utilisation de moyens thermiques en recherchant la conductivité thermique
  • G01N 3/08 - Recherche des propriétés mécaniques des matériaux solides par application d'une contrainte mécanique par application d'efforts permanents de traction ou de compression
  • G01N 3/18 - Exécution de tests à des températures élevées ou basses

39.

FLUIDSEALR

      
Numéro de série 98918290
Statut En instance
Date de dépôt 2024-12-23
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Liquid flashing, namely, sealants for building flashing applications; Sealants for buildings; adhesive sealants for general use; waterproofing sealants

40.

FLUIDSEALR

      
Numéro d'application 236996900
Statut En instance
Date de dépôt 2024-12-19
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

(1) Liquid flashing, namely, sealants for building flashing applications; sealants for buildings; adhesive sealants for general use; waterproofing sealants

41.

B-STAGEABLE AQUEOUS BINDER COMPOSITIONS

      
Numéro d'application 18815147
Statut En instance
Date de dépôt 2024-08-26
Date de la première publication 2024-12-19
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Mueller, Gert
  • Broderick, Andrew
  • Zhang, Xiujuan
  • Chen, Liang

Abrégé

An aqueous binder composition is disclosed that includes 5.0% by weight to 50.0% by weight of a monomeric polyol having at least four hydroxyl groups, based on the total solids content of the aqueous binder composition; and at least 50.0% by weight of a cross-linking agent comprising a polymeric polycarboxylic acid having at least two carboxylic acid groups, based on the total solids content of the aqueous binder composition. The aqueous binder composition includes a ratio of molar equivalents of carboxylic acid groups to hydroxyl groups is between 0.15/1.0 and 2.23/1 and has a pH of 2.2 to 4.0 and a viscosity at 40% solids and 25° C. of 10 cP to 60 cP.

Classes IPC  ?

  • C08F 20/06 - Acide acryliqueAcide méthacryliqueLeurs sels métalliques ou leurs sels d'ammonium
  • C08J 3/24 - Réticulation, p. ex. vulcanisation, de macromolécules
  • C08K 3/013 - Charges, pigments ou agents de renforcement
  • C08K 5/053 - Alcools polyhydroxyliques
  • C08L 83/04 - Polysiloxanes
  • D06N 3/00 - Cuir artificiel, toile cirée ou matériau similaire obtenu par enduction de nappes fibreuses avec une substance macromoléculaire, p. ex. avec des résines, du caoutchouc ou leurs dérivés
  • E04B 1/88 - Éléments à la fois isolants acoustiques et thermiques

42.

VACUTHERM

      
Numéro de série 98904495
Statut En instance
Date de dépôt 2024-12-16
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Insulating materials; insulation panels for residential and commercial buildings

43.

SILICON DIOXIDE AEROGEL COMPOSITE NON-WOVEN HEAT INSULATION SHEET

      
Numéro d'application US2024027929
Numéro de publication 2024/253783
Statut Délivré - en vigueur
Date de dépôt 2024-05-06
Date de publication 2024-12-12
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Li, Hongze
  • Li, Zheng
  • Que, Wenbin

Abrégé

The present application provides a silicon dioxide aerogel composite non-woven heat insulation sheet, comprising a non-woven and silicon dioxide aerogel. The non-woven comprises a fiber and a binder bonding the fiber together. The binder has a hydroxyl group. The silicon dioxide aerogel is compounded on the non-woven. The silicon dioxide aerogel composite non-woven heat insulation sheet is obtained through a sol preparation process, a gel substrate composite process, a gel reaction process and a drying process, wherein the sol preparation process includes heating reflux at a first preset time at a first preset temperature after a catalyst, solvent and silicon source are mixed and stirred evenly and adding and mixing evenly a gel accelerator to form a sol precursor after cooling. The gel substrate composite process includes compounding the sol precursor into the non-woven. The gel reaction process includes causing gel aging of a non-woven compounded with the sol precursor at a second preset temperature for a second preset time.

Classes IPC  ?

  • D04H 1/413 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles contenant des granulés autres que les substances absorbantes
  • B01J 13/00 - Chimie des colloïdes, p. ex. production de substances colloïdales ou de leurs solutions, non prévue ailleursFabrication de microcapsules ou de microbilles
  • C01B 33/154 - Préparation d'hydrogels par traitement acide de solutions aqueuses de silicates
  • C01B 33/158 - PurificationSéchageDéshydratation
  • C04B 14/06 - QuartzSable
  • D04H 1/587 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs caractérisé par les agents de liage utilisés
  • D04H 1/64 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs l'agent de liage étant appliqué à l'état humide, p. ex. agents chimiques en dispersion ou solution
  • D06M 11/79 - Traitement des fibres, fils, filés, tissus ou des articles fibreux faits de ces matières, avec des substances inorganiques ou leurs complexesUn tel traitement combiné avec un traitement mécanique, p. ex. mercerisage avec du silicium ou ses composés avec du dioxyde de silicium, des acides siliciques ou leurs sels
  • E04B 1/76 - Isolation thermique ou acoustique, absorption ou réflexion de la chaleur ou du sonAutres méthodes de construction procurant des conditions thermiques ou acoustiques favorables, p. ex. par accumulation de chaleur à l'intérieur des murs spécifiquement relatives à la chaleur uniquement
  • E04B 1/78 - Éléments calorifuges
  • F16L 59/02 - Forme ou configuration de matériaux isolants, avec ou sans revêtement formant un tout avec les matériaux isolants

44.

ACOUSTIMAX

      
Numéro de série 98893914
Statut En instance
Date de dépôt 2024-12-10
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Insulating materials, namely, acoustic insulation for use in appliances and automotive vehicles, sold to appliance and automobile manufacturers.

45.

OWENS CORNING ACOUSTIMAX

      
Numéro de série 98893919
Statut En instance
Date de dépôt 2024-12-10
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Insulating materials, namely, acoustic insulation for use in appliances and automotive vehicles, sold to appliance and automobile manufacturers.

46.

HILIGHT

      
Numéro d'application 019116313
Statut En instance
Date de dépôt 2024-12-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Glass fibers and glass fiber rovings for non-textile purposes; glass fibers and glass fiber rovings used to reinforce composite articles; unworked or semi-worked glass, namely glass fibers and glass fiber rovings for use as reinforcement, all for use as materials in further manufacture.

47.

WEATHERPRO

      
Numéro de série 98888433
Statut En instance
Date de dépôt 2024-12-06
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Coated woven plastic sheeting for wrapping and packaging lumber and wood products

48.

HILIGHT

      
Numéro de série 98886532
Statut En instance
Date de dépôt 2024-12-05
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fibers and glass fiber rovings for non-textile purposes; glass fibers and glass fiber rovings used to reinforce composite articles; unworked or semi-worked glass, namely glass fibers and glass fiber rovings, for use as a reinforcement all for use as materials in further manufacture.

49.

AMOR DE TECHO

      
Numéro de série 98880224
Statut En instance
Date de dépôt 2024-12-02
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 19 - Matériaux de construction non métalliques

Produits et services

Non-metal shingles

50.

EL TECHO DE TUS SUEÑOS

      
Numéro de série 98880225
Statut En instance
Date de dépôt 2024-12-02
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 19 - Matériaux de construction non métalliques

Produits et services

Non-metal shingles

51.

MÁS QUE SÓLO UN TECHO

      
Numéro de série 98880229
Statut En instance
Date de dépôt 2024-12-02
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 19 - Matériaux de construction non métalliques

Produits et services

Non-metal roofing shingles; non-metal roofing materials, namely, roof underlayment, ice and water barriers being roofing underlayments, and non-metal roof vents for ventilation

52.

HOMESEALR

      
Numéro d'application 236483500
Statut En instance
Date de dépôt 2024-11-27
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

(1) Adhesive Tape Used in Building and Construction

53.

OWENS CORNING BUILD YOUR ROOF

      
Numéro d'application 236481900
Statut En instance
Date de dépôt 2024-11-27
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 37 - Services de construction; extraction minière; installation et réparation

Produits et services

(1) Non-metal roofing shingles; non-metal roofing materials, namely, roof underlayment and ice and water barriers being roofing underlayment and non-metal roof vents for ventilation (1) Providing roofing services information via a website

54.

ROOFING MATERIALS INCLUDING A LAYER OF A PARTING AGENT

      
Numéro d'application 18773668
Statut En instance
Date de dépôt 2024-07-16
Date de la première publication 2024-11-07
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Fu, Hai
  • Lane, Ozma
  • Smith, William E.

Abrégé

Asphalt-based roofing materials, such as shingles, are disclosed that include a band of a parting material. The asphalt-based roofing material includes at least one asphalt-coated substrate that defines a headlap portion and a tab portion each having opposed top and bottom surfaces; a layer of backdust applied to at least a portion of the bottom surface of the headlap portion and to at least a portion of the bottom surface of the tab portion; a release section of parting material applied to the layer of backdust, where the parting material is included in the in the range of 0.0005 kg/m2 to 1 kg/m2; and an adhesive.

Classes IPC  ?

  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois
  • B32B 7/06 - Liaison entre couches permettant une séparation sans difficultés
  • B32B 11/04 - Produits stratifiés composés essentiellement des substances bitumineuses ou à base de goudron comprenant une telle substance comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 11/12 - Produits stratifiés composés essentiellement des substances bitumineuses ou à base de goudron adjacentes à une couche particulaire

55.

WOOD FIBER-GLASS COMPOSITE

      
Numéro d'application 18767036
Statut En instance
Date de dépôt 2024-07-09
Date de la première publication 2024-11-07
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Akbarian-Tefaghi, Sara
  • O'Leary, Robert
  • Kennedy, Colleen N.

Abrégé

The general inventive concepts relate to engineered wood products. The engineered wood products demonstrate improved properties including acoustic damping, fire resistance, and water absorption relative to similar engineered wood products that comprise only a single source of fibers. In contrast, the inventive engineered wood products include a combination of at least two types of fibers.

Classes IPC  ?

  • B27N 3/04 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres à partir de fibres
  • B27N 1/02 - Mélange du matériau avec un agent liant
  • B27N 3/00 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres
  • B27N 3/20 - Moulage ou pressage caractérisé par l'emploi de presses à fonctionnement discontinu

56.

COMPOSITE FIRE INSULATION SHEET, COMPOSITE PLATE, BATTERY PACK HOUSING, AND BATTERY PACK

      
Numéro d'application US2024023183
Numéro de publication 2024/226262
Statut Délivré - en vigueur
Date de dépôt 2024-04-05
Date de publication 2024-10-31
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • He, Tengfei
  • Zhu, Jinchun
  • Zhang, Tianhong

Abrégé

The present application discloses a composite fire insulation sheet, a composite plate, a battery pack housing and a battery pack. The composite fire insulation sheet comprises a first glass fiber sheet and a first aerogel composite expansion fire insulation layer. The first aerogel composite expansion fire insulation layer is arranged on at least one surface of the first glass fiber sheet and has a second glass fiber sheet. According to the composite fire insulation sheet of this aoplication, the expansion fireproof composition plays the role of flame retardant and fire prevention, while the aerogel composition is used to endow the sheet with excellent heat insulation property, such that the sheet can also perform the strong heat insulation performance.

Classes IPC  ?

  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 5/18 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par le fait qu'une des couches contient un matériau sous forme de mousse ou essentiellement poreux
  • B32B 5/24 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse

57.

AEROGEL THERMAL INSULATION FELT, PREPARATION SYSTEM FOR AEROGEL THERMAL INSULATION FELT, AND PREPARATION METHOD OF AEROGEL THERMAL INSULATION FELT

      
Numéro d'application US2024023185
Numéro de publication 2024/226263
Statut Délivré - en vigueur
Date de dépôt 2024-04-05
Date de publication 2024-10-31
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Li, Hongze
  • Li, Zheng
  • Que, Wenbin

Abrégé

The present application discloses a preparation system for aerogel thermal insulation felt, a preparation method of aerogel thermal insulation felt and an aerogel thermal insulation felt. The preparation system comprises a vacuum pumping device, a precursor supply device and a flexible sealing container. The vacuum pumping device is used to provide negative pressure, and the value of the negative pressure is adjustable. The precursor supply device is configured to provide a sol precursor. The flexible sealing container is employed in sol vacuum perfusion of a fiber felt and comprises an opposite first end and second end. The first end is in communication with the precursor supply device, and the second end is in communication with the vacuum pumping device. The thickness of a holding space in the flexible sealing container is adjustable according to the value of the negative pressure such that the thickness of the fiber felt accommodated in the holding space is adjustable. According to the preparation system for aerogel thermal insulation felt of the present application, the thickness of the fiber felt can be adjusted, which is conducive to the production of the gel with required thickness, good uniformity and low load, so as to obtain the aerogel thermal insulation felt with good heat insulation property.

Classes IPC  ?

  • D04H 1/4209 - Fibres inorganiques
  • D04H 1/4218 - Fibres de verre
  • D04H 1/4226 - Fibres de verre caractérisées par le dispositif de formation du non-tissé en fibres de verre
  • D04H 1/488 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles les voiles ou couches étant renforcées par des moyens mécaniques, p. ex. par roulage par aiguilletage ou opérations similaires pour provoquer l'enchevêtrement des fibres en combinaison avec au moins une autre méthode de consolidation en combinaison avec des agents de liage
  • D04H 1/587 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs caractérisé par les agents de liage utilisés
  • D04H 1/64 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs l'agent de liage étant appliqué à l'état humide, p. ex. agents chimiques en dispersion ou solution
  • B29C 70/36 - Façonnage par empilage, c.-à-d. application de fibres, de bandes ou de feuilles larges sur un moule, un gabarit ou un noyauFaçonnage par pistolage, c.-à-d. pulvérisation de fibres sur un moule, un gabarit ou un noyau et imprégnation par coulée, p. ex. coulée sous vide

58.

NAIL YOUR CAREER

      
Numéro d'application 235699600
Statut En instance
Date de dépôt 2024-10-21
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 35 - Publicité; Affaires commerciales

Produits et services

(1) Providing employee referrals in the field of building and construction; career and job placement consulting services; providing career and job information in the field of building and construction

59.

NAIL YOUR CAREER

      
Numéro de série 98811505
Statut En instance
Date de dépôt 2024-10-21
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 35 - Publicité; Affaires commerciales

Produits et services

Providing employee and potential employee referrals in the field of building and construction.

60.

REINFORCED COMPOSITE FACER AND INSULATION ASSEMBLY INCLUDING THE SAME

      
Numéro d'application 18294705
Statut En instance
Date de dépôt 2022-08-03
Date de la première publication 2024-10-17
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Polen, Shane
  • Wu, Jianhui
  • Steindler, Mitchell
  • Click, Kevin
  • Musick, Tyler
  • Ramey, Eric

Abrégé

A reinforced composite facer, an insulation assembly, and a method of making a reinforced composite facer are provided. The reinforced composite facer includes a carrier substrate, a scrim, and a thermoplastic coating that covers the scrim and contacts the carrier substrate and adheres the scrim to the carrier substrate. An insulation assembly including a reinforced composite facer has a pull-through strength that allows the insulation assembly to be installed using fewer fasteners, while also rendering the insulation assembly relatively impermeable.

Classes IPC  ?

  • B32B 17/06 - Produits stratifiés composés essentiellement d'une feuille de verre ou de fibres de verre, de scorie ou d'une substance similaire comprenant du verre comme seul composant ou comme composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 5/18 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par le fait qu'une des couches contient un matériau sous forme de mousse ou essentiellement poreux
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 37/10 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par la technique de pressage, p. ex. faisant usage de l'action directe du vide ou d'un fluide sous pression
  • B32B 37/12 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par l'usage d'adhésifs
  • B32B 37/24 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui ne présente pas de cohésion avant la stratification, p. ex. constituée de matériau granulaire projeté sur un substrat

61.

PULTRUDED PLANK, SPAR CAP, WIND TURBINE BLADE, AND PULTRUSION PREPARATION PROCESS

      
Numéro d'application US2024023179
Numéro de publication 2024/215564
Statut Délivré - en vigueur
Date de dépôt 2024-04-05
Date de publication 2024-10-17
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Peng, Jansy
  • Zhu, Jinchun
  • Zhang, Bowen
  • Shi, Jianfeng

Abrégé

The present application discloses a pultruded plank, a spar cap, a wind turbine blade, and a pultrusion preparation process. The pultruded plank comprises a pultruded core and a coated interface layer. The pultruded core is made with reinforced fibers impregnated with a core resin. The interface layer is made with an interface resin present on at least one surface of the pultruded core, and allows the pultruded plank to be wound and packaged after manufacturing. The interface resin contains an isocyanate resin and a polyester resin, and the mass ratio of the isocyanate resin to the polyester resin is 1:3~2:3. The surface of the interface layer forms a bonded surface on the pultruded plank, and the bonded surface is used to form a bonding interface between at least two pultruded planks.

Classes IPC  ?

  • B29C 70/52 - Pultrusion, c.-à-d. façonnage et compression par traction continue à travers une matrice

62.

COATED REINFORCED COMPOSITE FACER AND INSULATION ASSEMBLY INCLUDING THE SAME

      
Numéro d'application 18294720
Statut En instance
Date de dépôt 2022-08-03
Date de la première publication 2024-10-10
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Polen, Shane
  • Wu, Jianhui
  • Steindler, Mitchell
  • Click, Kevin
  • Musick, Tyler
  • Ramey, Eric

Abrégé

A coated reinforced composite facer. an insulation assembly, and a method of making a coated reinforced composite facer are provided. The coated reinforced composite facer includes a carrier substrate, a scrim, a thermoplastic coating, and a mineral coating. The thermoplastic coating adheres the scrim to one surface of the carrier substrate and the mineral coating is adhered to an opposite surface of the carrier substrate. An insulation assembly including a coated reinforced composite facer has a pull-through strength that allows the insulation assembly to be installed using fewer fasteners, while also rendering the insulation assembly relatively impermeable.

Classes IPC  ?

  • B32B 5/26 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse un autre couche également étant fibreuse ou filamenteuse
  • B32B 5/24 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 37/12 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par l'usage d'adhésifs

63.

ULTRAPIPE

      
Numéro d'application 019089410
Statut En instance
Date de dépôt 2024-10-10
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fibers, other than for insulation or textile use; Glass fibers, other than for insulation or textile use (glass fiber strands); Glass fiber chopped strands, other than for insulation or textile use; Glass fiber rovings, other than for insulation or textile use; Glass fibers, other than for insulation or textile use (glass fiber veil or mat) made from randomly dispersed glass fibers, wet or dry laid, and bonded.

64.

BARRIER COATING COMPOSITION FOR USE IN MANUFACTURING INSULATION PRODUCTS WITH REDUCED HALOGENATED BLOWING AGENTS

      
Numéro d'application 18617203
Statut En instance
Date de dépôt 2024-03-26
Date de la première publication 2024-10-03
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Boudreaux, Chase
  • Thomas, Jeff
  • Weekley, Mitchell
  • Heppe, Christine
  • Frazier, Laura
  • Rogers, Ty
  • Salgado, Saul

Abrégé

A coated insulation product with a reduced fluorinated blowing agent concentration, while maintaining acceptable thermal properties (e.g., a 180-day R/in value of at least 4.8), is disclosed. The coated insulation product includes a foam product formed from a foamable composition comprising: a matrix composition; and a blowing agent composition comprising less than 3.5 wt. % of a fluorinated alkene, based on a total weight of the foamable composition. The foam product is coated with 3 g/m2 and 225 g/m2 of a barrier coating composition on at least one surface. The barrier coating composition includes: 40 wt. % to 99.9 wt. % of a barrier polymer having a minimum degree of crystallinity of 10%; and 0.01 wt. % to 60 wt. % of at least one additive.

Classes IPC  ?

  • C08J 9/228 - Façonnage d'articles en mousse
  • C08J 9/00 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement
  • C08J 9/12 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement utilisant des gaz de gonflage produits par un agent de gonflage introduit au préalable par un agent physique de gonflage
  • C08J 9/14 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement utilisant des gaz de gonflage produits par un agent de gonflage introduit au préalable par un agent physique de gonflage organique
  • C08J 9/34 - Caractéristiques chimiques de la fabrication d'objets constitués par un cœur macromoléculaire sous forme de mousse avec une couche superficielle macromoléculaire d'une densité supérieure à celle du cœur
  • C08J 9/36 - Post-traitement

65.

BARRIER COATING COMPOSITION FOR USE IN MANUFACTURING INSULATION PRODUCTS WITH IMPROVED THERMAL INSULATION

      
Numéro d'application 18617218
Statut En instance
Date de dépôt 2024-03-26
Date de la première publication 2024-10-03
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Boudreaux, Chase
  • Thomas, Jeff
  • Weekley, Mitchell
  • Heppe, Christine
  • Frazier, Laura

Abrégé

A coated insulation product formed with a low GWP blowing agent composition is disclosed that is capable of achieving a 180-day R/in insulation value of at least 5. The coated insulation product includes a foam product formed from a foamable composition comprising: a matrix composition; and a blowing agent composition a blowing agent composition comprising 15 wt. % to 60 wt. % of a fluorinated alkene and 40 wt. % to 85 wt. % of a co-blowing agent. The foam product is coated with 3 g/m2 and 225 g/m2 of a barrier coating composition on at least one surface.

Classes IPC  ?

  • C08J 9/228 - Façonnage d'articles en mousse
  • C08J 9/00 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement
  • C08J 9/14 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement utilisant des gaz de gonflage produits par un agent de gonflage introduit au préalable par un agent physique de gonflage organique
  • C08J 9/34 - Caractéristiques chimiques de la fabrication d'objets constitués par un cœur macromoléculaire sous forme de mousse avec une couche superficielle macromoléculaire d'une densité supérieure à celle du cœur
  • C08J 9/36 - Post-traitement

66.

BARRIER COATING COMPOSITION FOR USE IN MANUFACTURING INSULATION PRODUCTS WITH REDUCED HALOGENATED BLOWING AGENTS

      
Numéro d'application US2024021503
Numéro de publication 2024/206326
Statut Délivré - en vigueur
Date de dépôt 2024-03-26
Date de publication 2024-10-03
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Boudreaux, Chase
  • Thomas, Jeff
  • Weekley, Mitchell
  • Heppe, Christine
  • Frazier, Laura
  • Rogers, Ty
  • Salgado, Saul

Abrégé

A coated insulation product with a reduced fluorinated blowing agent concentration, while maintaining acceptable thermal properties (e.g., an 180-day R/in value of at least 4.8), is disclosed. The coated insulation product includes a foam product formed from a foamable composition comprising: a matrix composition; and a blowing agent composition comprising less than 3.5 wt.% of a fluorinated alkene, based on a total weight of the foamable composition. The foam product is coated with 3 g/m2and 225 g/m2of a barrier coating composition on at least one surface. The barrier coating composition includes: 40 wt. % to 99.9 wt.% of a barrier polymer having a minimum degree of crystallinity of 10%; and 0.01 wt.% to 60 wt.% of at least one additive.

Classes IPC  ?

  • C08J 9/12 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement utilisant des gaz de gonflage produits par un agent de gonflage introduit au préalable par un agent physique de gonflage
  • C08J 9/14 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement utilisant des gaz de gonflage produits par un agent de gonflage introduit au préalable par un agent physique de gonflage organique
  • C08J 9/36 - Post-traitement

67.

BARRIER COATING COMPOSITION FOR USE IN MANUFACTURING INSULATION PRODUCTS WITH IMPROVED THERMAL INSULATION

      
Numéro d'application US2024021505
Numéro de publication 2024/206327
Statut Délivré - en vigueur
Date de dépôt 2024-03-26
Date de publication 2024-10-03
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Boudreaux, Chase
  • Thomas, Jeff
  • Weekley, Mitchell
  • Heppe, Christine
  • Frazier, Laura

Abrégé

A coated insulation product formed with a low GWP blowing agent composition is disclosed that is capable of achieving a 180-day R/in insulation value of at least 5. The coated insulation product includes a foam product formed from a foamable composition comprising: a matrix composition; and a blowing agent composition a blowing agent composition comprising 15 wt.% to 60 wt.% of a fluorinated alkene and 40 wt.% to 85 wt.% of a co-blowing agent. The foam product is coated with 3 g/m2and 225 g/m2of a barrier coating composition on at least one surface.

Classes IPC  ?

  • C09D 109/06 - Copolymères avec le styrène
  • C09D 127/08 - Homopolymères ou copolymères du chlorure de vinylidène
  • C09D 129/04 - Alcool polyvinyliqueHomopolymères ou copolymères partiellement hydrolysés d'esters d'alcools non saturés avec des acides carboxyliques saturés
  • C09D 175/04 - Polyuréthanes

68.

METHOD AND ARRANGEMENT FOR PROVIDING COMPLETE ROWS OF MINERAL FIBRE SLABS

      
Numéro d'application EP2024057471
Numéro de publication 2024/194365
Statut Délivré - en vigueur
Date de dépôt 2024-03-20
Date de publication 2024-09-26
Propriétaire PAROC GROUP OY (Finlande)
Inventeur(s) Eklund, Ralf

Abrégé

The invention relates to a method and arrangement for providing complete rows of mineral fibre slabs in a production process of mineral fibre slabs. In the method complete rows of mineral fibre slabs are transferred in the production process, wherein each row contains a predetermined number of mineral fibre slabs. Defective slabs are removed, whereby one or more incomplete rows of mineral fibre slabs are formed. The complete rows and the incomplete rows are transported along a common path in a first direction of travel on a conveyor, and one or more substitute slabs are inserted before the stacker into each incomplete row from at least one slab buffer. The incomplete rows are thus made into complete rows containing the predetermined number of mineral fibre slabs.

Classes IPC  ?

  • B65G 43/08 - Dispositifs de commande actionnés par l'alimentation, le déplacement ou le déchargement des objets ou matériaux
  • B65G 43/10 - Commande en série des transporteurs fonctionnant en combinaison
  • B65G 47/08 - Dispositifs pour alimenter en objets ou matériaux les transporteurs pour alimenter en objets à partir d'un seul groupe d'objets rangés en ordre, p. ex. pièces à usiner en magasin espaçant ou groupant les objets pendant l'alimentation
  • B65G 47/52 - Dispositifs pour transférer objets ou matériaux entre transporteurs, p. ex. pour décharger ou alimenter
  • B65G 59/02 - Désempilage par le haut de la pile
  • B07C 5/36 - Appareils trieurs caractérisés par les moyens qu'ils utilisent en vue de la distribution

69.

Ruler

      
Numéro d'application 29871118
Numéro de brevet D1043381
Statut Délivré - en vigueur
Date de dépôt 2023-02-13
Date de la première publication 2024-09-24
Date d'octroi 2024-09-24
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s) Roby, Trevor

70.

SHINGLES WITH A THICK APPEARANCE

      
Numéro d'application 18673766
Statut En instance
Date de dépôt 2024-05-24
Date de la première publication 2024-09-19
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Grubka, Lawrence J.
  • Penrod, Douglas S.
  • Smith, William E.
  • Thies, John A.
  • Honsvick, Jacob Paul

Abrégé

A shingle comprises an overlay, an underlay, and a height increasing material disposed between the overlay and the underlay. The height increasing material includes a first adhesive adhered to the overlay, height increasing granules adhered to the first adhesive, and a second adhesive adhered to the height increasing granules and the underlay. The height increasing material can extend along front ends of tab portions of the overlay, along front cutout edges that extend between tab portions of the overlay, or both.

Classes IPC  ?

  • E04D 1/28 - Éléments de couvertures comprenant plusieurs couches, p. ex. pour l’isolation
  • B32B 11/10 - Produits stratifiés composés essentiellement des substances bitumineuses ou à base de goudron adjacentes à une couche fibreuse ou filamenteuse
  • D06N 5/00 - Carton goudronné, c.-à-d. nappes de fibres enduites de bitume
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/12 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois
  • E04D 1/34 - Attaches pour la fixation des éléments de couverture à leurs supports

71.

COMPOSITE BOARD WITH EDGE REINFORCEMENT FOR IMPROVED MECHANICAL PERFORMANCE

      
Numéro d'application US2024019368
Numéro de publication 2024/191903
Statut Délivré - en vigueur
Date de dépôt 2024-03-11
Date de publication 2024-09-19
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Turner, Darrell, James
  • Pham, Dinh Chi
  • Wernette, Daryl Paul

Abrégé

A composite board includes an inner core defining a top side, a bottom side, a first lateral side, and a second lateral side, the inner core including a polymeric composition. At least one reinforcing tape layer extends at least partially along the first lateral side and the second lateral side of the inner core, and an outer skin layer surrounds the inner core and the at least one reinforcing tape layer.

Classes IPC  ?

  • B32B 5/24 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse
  • B32B 27/06 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 3/08 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords caractérisés par des éléments ajoutés à des endroits déterminés
  • B32B 3/26 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes

72.

SUSTAINA

      
Numéro d'application 234969400
Statut En instance
Date de dépôt 2024-09-13
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

(1) Glass fibers, other than for textile use; glass fibers, other than for textile use (glass fiber strands); glass fiber chopped strands, other than for textile use; glass fiber rovings, other than for textile use; glass fibers, other than for textile use (glass fiber veil or mat) made from randomly dispersed glass fibers, wet or dry laid, and bonded

73.

FIBER CATCHING DEVICE FOR ROTATING TUBE

      
Numéro d'application 18664604
Statut En instance
Date de dépôt 2024-05-15
Date de la première publication 2024-09-05
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Macdonald, Frank
  • Berthelot, Aurelien
  • Graham, John
  • Williams, Robert
  • Krueger, Jill A.
  • Galloway, Eugene
  • Davis, Adam

Abrégé

A fiber catching device includes a base having an inboard portion and an outboard portion, an external wall extending upwardly from the inboard portion of the base, an outboard hook extending upwardly from the outboard portion of the base and extending to a height above the external wall, and at least one receiver disposed between the external wall and the outboard hook. In one variation, a plurality of protrusions are disposed on the external wall and define a plurality of gaps there between.

Classes IPC  ?

  • B65H 54/38 - Dispositions pour éviter l'enroulage en ruban

74.

INSULATION PAD FOR PIPES AND VESSELS

      
Numéro d'application 18658377
Statut En instance
Date de dépôt 2024-05-08
Date de la première publication 2024-09-05
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Thaxton, Steven Albert
  • Davis, Andrew Scott
  • Haley, Glenn Eric
  • Cox, David
  • Hoffman, John William
  • Stauch, William Henry

Abrégé

An insulation pad includes a binderless pack of glass fibers and an envelope around the binderless pack of glass fibers. The glass fibers are mechanically entangled by needling such that the binderless pack has a density of from 4.5 to 5.5 pounds per cubic foot. The insulation pad is used to insulate pipes and vessels.

Classes IPC  ?

  • D04H 1/46 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles les voiles ou couches étant renforcées par des moyens mécaniques, p. ex. par roulage par aiguilletage ou opérations similaires pour provoquer l'enchevêtrement des fibres
  • C03C 25/26 - Composés macromoléculaires ou prépolymères
  • D04H 1/4218 - Fibres de verre
  • D04H 1/4374 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles caractérisés par l'emploi de certaines sortes de fibres dans la mesure où cet emploi n'a pas d'influence prépondérante sur la consolidation du voile utilisant différents types de couches, p. ex. par superposition de couches
  • D04H 1/488 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles les voiles ou couches étant renforcées par des moyens mécaniques, p. ex. par roulage par aiguilletage ou opérations similaires pour provoquer l'enchevêtrement des fibres en combinaison avec au moins une autre méthode de consolidation en combinaison avec des agents de liage
  • D04H 1/498 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles les voiles ou couches étant renforcées par des moyens mécaniques, p. ex. par roulage par aiguilletage ou opérations similaires pour provoquer l'enchevêtrement des fibres enchevêtrement des couches de non-tissés
  • D04H 1/60 - Non-tissés formés uniquement ou principalement de fibres coupées ou autres fibres similaires relativement courtes à partir de voiles ou couches composés de fibres ne possédant pas des propriétés cohésives réelles ou potentielles par application, incorporation ou activation de liages chimiques ou thermoplastiques, p. ex. adhésifs l'agent de liage étant appliqué à l'état sec, p. ex. agents thermo-activables à l'état solide ou fondu, et application de chaleur subséquente
  • D04H 3/004 - Fils ou filaments de verre
  • D04H 3/105 - Non-tissés formés uniquement ou principalement de fils ou de matériaux filamenteux similaires de bonne longueur caractérisés par la méthode de renforcement ou de consolidation avec liages faits mécaniquement entre fils et filaments par aiguilletage
  • F16L 59/02 - Forme ou configuration de matériaux isolants, avec ou sans revêtement formant un tout avec les matériaux isolants
  • F16L 59/14 - Dispositions pour l'isolation des tuyaux ou des tuyauteries

75.

VIDAWOOL GROW SHEET

      
Numéro d'application 234701300
Statut En instance
Date de dépôt 2024-08-30
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture

Produits et services

(1) Hydroponic substrates made of mineral wool; hydroponic substrates made of fiberglass.

76.

VIDAWOOL GROW SHEET

      
Numéro de série 98725814
Statut En instance
Date de dépôt 2024-08-30
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture

Produits et services

Hydroponic substrates made of mineral wool; hydroponic substrates made of fiberglass.

77.

CELLULAR GLASS PASSIVE FIRE SUPPRESSION SYSTEM

      
Numéro d'application US2024016608
Numéro de publication 2024/178037
Statut Délivré - en vigueur
Date de dépôt 2024-02-21
Date de publication 2024-08-29
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Ferrell, Bobby
  • Stambaugh, Brandon
  • Bovard, Timothy
  • Cusick, Alec

Abrégé

A clad cellular glass block (10) and a passive fire suppression system incorporating clad cellular glass blocks are disclosed. The system is comprised of segments of cellular glass block including a cladding material that comprises an integrated connector flange (47, 57a/b, 67a/b, 77a/b, 87, 97). Adjacent cellular glass blocks in a reservoir can be interlocked to create a passive barrier the helps to reduce the damage or risks associated with a liquid hydrocarbon spill.

Classes IPC  ?

  • A62C 3/06 - Prévention, limitation ou extinction des incendies spécialement adaptées pour des objets ou des endroits particuliers pour des matériaux très inflammables, p. ex. les métaux légers, les produits du pétrole
  • C10G 99/00 - Matière non prévue dans les autres groupes de la présente sous-classe
  • E04B 1/94 - Protection contre d'autres agents indésirables ou dangers contre le feu
  • C03C 11/00 - Verre alvéolé

78.

AERO-PAK

      
Numéro d'application 234681500
Statut En instance
Date de dépôt 2024-08-29
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience
  • 22 - Cordes; filets; tentes, auvents, voiles et sacs; matières de rembourrage

Produits et services

(1) Glass fiber reinforcements; glass fibers and glass fiber rovings non-textile purposes; glass fibers for reinforcing plastics and other composite materials. (2) Glass fibers and glass fiber rovings for textile purposes.

79.

AERO-PAK

      
Numéro d'application 019072646
Statut Enregistrée
Date de dépôt 2024-08-29
Date d'enregistrement 2025-03-01
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ?
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 22 - Cordes; filets; tentes, auvents, voiles et sacs; matières de rembourrage

Produits et services

Glass fibers and glass fiber rovings for non-textile purposes, namely, to reinforce plastics and other composite articles. Glass fibers and glass fiber rovings for textile purposes..

80.

AERO-PAK

      
Numéro de série 98719123
Statut En instance
Date de dépôt 2024-08-27
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ?
  • 22 - Cordes; filets; tentes, auvents, voiles et sacs; matières de rembourrage
  • 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fibers and glass fiber rovings for textile purposes. Glass fiber reinforcements; glass fibers and glass fiber rovings non-textile purposes; glass fibers for reinforcing plastics and other composite materials.

81.

CELLULAR GLASS PASSIVE FIRE SUPPRESSION SYSTEM

      
Numéro d'application 18582846
Statut En instance
Date de dépôt 2024-02-21
Date de la première publication 2024-08-22
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Ferrell, Bobby
  • Stambaugh, Brandon
  • Bovard, Timothy
  • Cusick, Alec

Abrégé

A clad cellular glass block and a passive fire suppression system incorporating clad cellular glass blocks are disclosed. The system is comprised of segments of cellular glass block including a cladding material that comprises an integrated connector flange. Adjacent cellular glass blocks in a reservoir can be interlocked to create a passive barrier the helps to reduce the damage or risks associated with a liquid hydrocarbon spill.

Classes IPC  ?

  • E04C 1/42 - Éléments de construction en forme de blocs ou autre pour la construction de parties de bâtiments de verre ou autre matière transparente
  • A62C 2/06 - Barrières coupe-feu

82.

FIBERGLASS INSULATION PRODUCT WITH IMPROVED RECOVERY

      
Numéro d'application 18562930
Statut En instance
Date de dépôt 2022-06-03
Date de la première publication 2024-08-08
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Matos, Roberto
  • Flantroy, Misty
  • Frysinger, Clint
  • Shonebarger, Greg

Abrégé

A fibrous insulation product exhibits improved resistance to compressive forces and resiliency in quickly recovering from compression.

Classes IPC  ?

  • C03C 25/28 - Composés macromoléculaires ou prépolymères obtenus par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone

83.

PROCESS FOR DRYING WET GLASS FIBRE FORMING PACKAGES

      
Numéro d'application 18631162
Statut En instance
Date de dépôt 2024-04-10
Date de la première publication 2024-08-01
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Roux, Etienne
  • Boissonnat, Philippe

Abrégé

Herein is described a process for drying wet glass fibre forming packages, the process comprising: providing a wet glass fibre forming package comprising a strand of glass fibres with an aqueous sizing applied to the glass fibres; and subjecting the wet glass fibre forming package to microwave radiation having a frequency in the range of about 750 to about 1050 MHz.

Classes IPC  ?

  • C03C 25/64 - SéchageDéshydratationDéshydroxylation
  • C03B 37/02 - Fabrication de fibres ou de filaments de verre par étirage ou extrusion
  • C03C 25/002 - Traitement thermique
  • C03C 25/12 - Procédés généraux de revêtementDispositifs à cet effet

84.

NON-COMBUSTIBLE EDGE FOR INSULATED CONCRETE SANDWICH WALL PANELS

      
Numéro d'application 18633714
Statut En instance
Date de dépôt 2024-04-12
Date de la première publication 2024-08-01
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Van Sloun, Jeffrey
  • Coppock, Tiffany

Abrégé

An insulation system for use with a sandwich wall panel is disclosed. The insulation system reduces the risk of flame spread through the sandwich wall panels. The insulation system provides a balance between good insulating properties and reduced flammability, without detrimentally increasing the cost of the sandwich wall panel.

Classes IPC  ?

  • E04B 2/92 - Panneaux de type sandwich
  • E04B 2/84 - Murs réalisés par moulage, coulage ou compactage sur place

85.

SHINGLE WITH REINFORCEMENT MEMBER

      
Numéro d'application 18625289
Statut En instance
Date de dépôt 2024-04-03
Date de la première publication 2024-07-25
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Belt, James S.
  • Elliott, Bert W.

Abrégé

A roofing shingle includes an overlay sheet, an underlay sheet, and a reinforcement member. The overlay sheet includes a headlap portion and a tab portion, wherein the overlay sheet has an overlay sheet height. The underlay sheet is secured to a bottom surface of the overlay sheet such that a region of the underlay sheet overlaps a region of the headlap portion of the overlay sheet. The reinforcement material is secured to a top surface of the headlap portion of the overlay sheet, wherein the reinforcement material is configured to improve nail pull-through, wherein the reinforcement material extends beyond the overlapping regions of the headlap portion and the underlay sheet.

Classes IPC  ?

  • E04D 1/28 - Éléments de couvertures comprenant plusieurs couches, p. ex. pour l’isolation
  • B32B 3/06 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour lier les couches ensembleCaractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour attacher le produit à quelque chose d'autre p. ex. à un support
  • B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 5/26 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse un autre couche également étant fibreuse ou filamenteuse
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B65D 69/00 - Objets groupés pour commodité de stockage ou de transport sans utiliser d'éléments d'emballage
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/12 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois
  • E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux
  • E04D 1/34 - Attaches pour la fixation des éléments de couverture à leurs supports

86.

RADONBARRIER

      
Numéro de série 98659488
Statut En instance
Date de dépôt 2024-07-22
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ?
  • 01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler

Produits et services

Chemicals for use in the manufacture of polyurethanes, namely, polyurethane resin and isocyanate components for mixture to provide a cellular plastic foam structure. Spray foam insulation for building and construction; polyurethane foam insulation.

87.

HYBRID POLYURETHANE SPRAY FOAMS MADE WITH URETHANE PREPOLYMERS AND RHEOLOGY MODIFIERS

      
Numéro d'application 18600933
Statut En instance
Date de dépôt 2024-03-11
Date de la première publication 2024-07-11
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s) Olang, Fatemeh Nassreen

Abrégé

Hybrid spray foams utilize a urethane reactant, a crosslinker, and an (optional) epoxy and/or acrylic resin along with a blowing agent and rheology modifier to produce a quick-setting foam that remains in place until the foam forms and cures. The urethane reactant may be formed as an adduct with or without the use of isocyanate chemistry. In some embodiments, the polyurethane oligomer is made by reacting cyclocarbonates and di- or polyamines, while in other embodiments the polyurethane backbone employs the use of commercially available capped or blocked urethane oligomers made by any method. The oligomers contain reactive groups, typically at the oligomer ends, that crosslink with crosslinkers or with acrylic or epoxy resins to form hybrid polyurethane foams. Foams may also contain a plasticizer, and/or a surfactant as well as other optional additives. Methods of making such foams are also provided.

Classes IPC  ?

  • C08J 9/14 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement utilisant des gaz de gonflage produits par un agent de gonflage introduit au préalable par un agent physique de gonflage organique
  • C08G 59/50 - Amines
  • C08J 9/00 - Mise en œuvre de substances macromoléculaires pour produire des matériaux ou objets poreux ou alvéolairesLeur post-traitement
  • C08L 63/00 - Compositions contenant des résines époxyCompositions contenant des dérivés des résines époxy
  • C08L 75/16 - Polyuréthanes comportant des liaisons non saturées carbone-carbone comportant des liaisons non saturées carbone-carbone terminales

88.

FIBERGLASS INSULATION PRODUCT WITH IMPROVED CAVITY RETENTION

      
Numéro d'application 18562955
Statut En instance
Date de dépôt 2022-06-03
Date de la première publication 2024-07-11
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Decarolis, David
  • Mullett, Kelsey
  • Slone, Tim
  • Cuadrado, Brenna

Abrégé

A fibrous insulation product that exhibits improved cavity retention ability.

Classes IPC  ?

89.

LITHIUM-FREE HIGH MODULUS FIBERGLASS COMPOSITION

      
Numéro d'application US2024010427
Numéro de publication 2024/148228
Statut Délivré - en vigueur
Date de dépôt 2024-01-05
Date de publication 2024-07-11
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s) Korwin-Edson, Michelle L.

Abrégé

22322222322/(MgO+CaO)) of 2.3 – 2.7; a ratio C2 (C2= MgO/CaO) of at least 1.3, and a ratio C4 (C4 = Al3+/Mg2+) of at least 1.3. The lithium-free glass composition has a fiberizing temperature no greater than 1,300 °C.

Classes IPC  ?

  • C03C 3/087 - Compositions pour la fabrication du verre contenant de la silice avec 40 à 90% en poids de silice contenant de l'oxyde d'aluminium ou un composé du fer contenant un oxyde d'un métal divalent contenant de l'oxyde de calcium, p. ex. verre à vitre ordinaire ou verre pour récipients creux
  • C03C 13/00 - Compositions pour fibres ou filaments de verre

90.

METHOD AND CONFIGURATION FOR CONNECTING ROVING ASSEMBLIES

      
Numéro d'application US2023084509
Numéro de publication 2024/145042
Statut Délivré - en vigueur
Date de dépôt 2023-12-18
Date de publication 2024-07-04
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Flores Lopez, Alejandro
  • Lezama Gonzalez, Angel
  • Hernandez Diaz, Zaira Elba
  • Martinez Diaz, Tania

Abrégé

A pair of connected roving assemblies having a first roving assembly (302) with a first main strand (306) of continuous first glass fibers, the first main strand (306) extending from a first leading end portion (310) to a first trailing end portion (312) opposite the first leading end portion (310), a second roving assembly (304) having a second main strand (308) of continuous second glass fibers, the second main strand (308) extending from a second leading end portion (314) to a second trailing end portion (316) opposite the first leading end portion (314), and a first connection (326) connecting the first trailing end portion (312) to the second leading end portion (314). The first connection (326) includes a first minor strand (A) of the first main strand (306) forming a first spiral wrap around the second leading end portion (314) of the second roving assembly (304) and a second minor strand (B1) of the first main strand (306) forming a second spiral wrap around the second leading end portion (314) of the second roving assembly (304).

Classes IPC  ?

  • B65H 49/12 - Dispositifs supportant les paquets pour un paquet en action et un ou plusieurs en réserve les paquets de réserve étant montés en vue de permettre un transfert manuel ou automatique à la position de travail
  • B65H 69/04 - Procédés ou dispositifs pour raccorder des longueurs successives du matériauDispositifs de nouage par nouage

91.

SUSTAINA

      
Numéro d'application 019049544
Statut Enregistrée
Date de dépôt 2024-07-03
Date d'enregistrement 2024-12-05
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fibers, other than for textile use; glass fibers, other than for textile use (glass fiber strands); glass fiber chopped strands, other than for textile use; glass fiber rovings, other than for textile use; glass fibers, other than for textile use(glass fiber veil or mat) made from randomly dispersed glass fibers, wet or dry laid, and bonded.

92.

SUSTAINA

      
Numéro de série 98629409
Statut En instance
Date de dépôt 2024-07-02
Propriétaire Owens Corning Intellectual Capital, LLC ()
Classes de Nice  ? 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience

Produits et services

Glass fibers, other than for textile use; glass fibers, other than for textile use being glass fiber strands; glass fiber chopped strands, other than for textile use; glass fiber rovings, other than for textile use; glass fibers, other than for textile use being glass fiber veil or mat made from randomly dispersed glass fibers, wet or dry laid, and bonded

93.

MODIFIED FILLER PARTICLES FOR ASPHALT SHINGLES

      
Numéro d'application 18540991
Statut En instance
Date de dépôt 2023-12-15
Date de la première publication 2024-06-20
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Fu, Hai
  • Pramounmat, Nuttanit
  • Verhoff, Jonathan
  • Hager, Gregory T.

Abrégé

Roofing shingles provided herein include an asphalt-coated sheet, at least a portion of the asphalt-coated sheet comprises a plurality of granules disposed thereon. The asphalt-coated sheet includes a coating formed from an asphalt composition disposed on a substrate. The asphalt composition includes greater than about 40 wt. % of a filler, based on the weight of the total solids content of the asphalt composition, from about 0.01 wt. % to about 10 wt. % of a modifying agent selected from the group consisting of a fatty acid or salts thereof, metal hydroxide or a metal stearate, and asphalt. The resultant roofing shingle has a CD tear resistance of at least about 1,100 g as measured according to ASTM D1922 and a scrub loss of less than 0.60 g as measured according to ASTM D4977.

Classes IPC  ?

  • C09D 195/00 - Compositions de revêtement à base de matériaux bitumineux, p. ex. asphalte, goudron ou brai
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois

94.

MODIFIED FILLER PARTICLES FOR ASPHALT ROOFING PRODUCTS

      
Numéro de document 03223556
Statut En instance
Date de dépôt 2023-12-15
Date de disponibilité au public 2024-06-16
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Fu, Hai
  • Pramounmat, Nuttanit
  • Verhoff, Jonathan
  • Hager, Gregory T.

Abrégé

Roofing shingles provided herein include an asphalt-coated sheet, at least a portion of the asphalt-coated sheet comprises a plurality of granules disposed thereon. The asphalt-coated sheet includes a coating formed from an asphalt composition disposed on a substrate. The asphalt composition includes greater than about 40 wt.% of a filler, based on the weight of the total solids content of the asphalt composition, from about 0.01 wt.% to about 10 wt.% of a modifying agent selected from the group consisting of a fatty acid or salts thereof, metal hydroxide or a metal stearate, and asphalt. The resultant roofing shingle has a CD tear resistance of at least about 1,100 g as measured according to ASTM D1922 and a scrub loss of less than 0.60 g as measured according to ASTM D4977.

Classes IPC  ?

  • B32B 11/02 - Produits stratifiés composés essentiellement des substances bitumineuses ou à base de goudron avec des fibres ou particules enrobées dans ces substances ou liées à ces substances
  • C04B 22/06 - OxydesHydroxydes
  • C04B 24/04 - Acides carboxyliquesLeurs sels, anhydrides ou esters
  • C04B 24/08 - GraissesHuiles grassesCires du type esterAcides gras supérieurs, c.-à-d. ayant au moins sept atomes de carbone dans une chaîne linéaire, liés à un groupe carboxyleGraisses ou huiles oxydées
  • C09D 195/00 - Compositions de revêtement à base de matériaux bitumineux, p. ex. asphalte, goudron ou brai
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois
  • E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux

95.

MULTILAYER STRUCTURE WITH ENHANCED WALKABILITY

      
Numéro d'application US2023082284
Numéro de publication 2024/123666
Statut Délivré - en vigueur
Date de dépôt 2023-12-04
Date de publication 2024-06-13
Propriétaire OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
Inventeur(s)
  • Pruzinsky, Stephanie
  • Vido, Martin
  • Newsome, Toni
  • Shaeffer, Brian
  • Cortes-Medina, Marcos
  • Nogaj, Melissa
  • Maxson, Stephanie
  • Pham, Dinh Chi

Abrégé

A roofing underlayment with enhanced walkability is provided. The roofing underlayment has a reinforcement, a film, and a plurality of gripping structures. The gripping structures are disposed on at least a portion of a first film surface of the film. The roofing underlayment has at least one of a coefficient of friction of between about 1.2 and about 1.8 when tested in dry condition using COF method 1, a coefficient of friction of between about 0.8 and about 1.5 when tested in wet condition using COF method 1, and a coefficient of friction of between about 0.5 and about 1.2 using COF method 1.

Classes IPC  ?

  • B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
  • B32B 3/08 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords caractérisés par des éléments ajoutés à des endroits déterminés
  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 7/02 - Propriétés physiques, chimiques ou physicochimiques
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 25/04 - Produits stratifiés composés essentiellement de caoutchouc naturel ou synthétique comprenant du caoutchouc comme seul composant ou comme composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 27/06 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique

96.

SHINGLES WITH INCREASED HYDROPHOBICITY

      
Numéro d'application 18442224
Statut En instance
Date de dépôt 2024-02-15
Date de la première publication 2024-06-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Vermilion, Donn R.
  • Zhang, Xiujuan
  • Ward, William Brian
  • Armintrout, Chris

Abrégé

A shingle includes a substrate having an asphalt coating on a top surface of the substrate and on a bottom surface of the substrate. A surface layer of granules is embedded in the asphalt on the top surface of the substrate. A backdust layer of particles is embedded in the asphalt on the bottom surface of the substrate. A sealant is disposed on the backdust. A hydrophobic material is applied to the sealant.

Classes IPC  ?

  • E04D 1/28 - Éléments de couvertures comprenant plusieurs couches, p. ex. pour l’isolation
  • B32B 37/24 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui ne présente pas de cohésion avant la stratification, p. ex. constituée de matériau granulaire projeté sur un substrat
  • E04D 1/00 - Couverture de toit utilisant des tuiles, des ardoises, des bardeaux ou d'autres petits éléments de couverture
  • E04D 1/20 - Éléments de couvertures en forme de tuiles plates ou bardeaux, c.-à-d. avec une surface extérieure plate en matières plastiques ou fibreuses ou en bois
  • E04D 1/26 - Éléments de couvertures en forme de bande, donnant l'apparence d'une ligne de bardeaux

97.

COATED CELLULAR GLASS INSULATION SYSTEM

      
Numéro d'application 18524422
Statut En instance
Date de dépôt 2023-11-30
Date de la première publication 2024-06-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Badger, Steven
  • Huang, Helen
  • Sorsby, Iii, William F.

Abrégé

Methods for coating a cellular glass insulation material and a coated cellular glass insulation system for insulating the roof of a structure. The method comprises applying a coating system to at least one surface of a cellular glass block, the coating system comprising a first coating and a second coating, wherein the coating system provides durability and prevents water vapor intrusion. The coated cellular glass insulation system is comprised of blocks of coated cellular glass insulation and a membrane.

Classes IPC  ?

  • C03C 17/42 - Traitement de surface du verre, p. ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement avec au moins deux revêtements ayant des compositions différentes un revêtement au moins étant une substance organique et un revêtement au moins étant un non-métal
  • C03C 11/00 - Verre alvéolé
  • C03C 17/22 - Traitement de surface du verre, p. ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement par d'autres matières inorganiques
  • C03C 17/32 - Traitement de surface du verre, p. ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement par des matières organiques avec des résines synthétiques ou naturelles

98.

SUPPORTING POLE

      
Numéro d'application 18553592
Statut En instance
Date de dépôt 2022-03-30
Date de la première publication 2024-06-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Boufaida, Zakariya
  • Rodriguez Ramirez, José María

Abrégé

A supporting pole for supporting objects at an elevated position, such as a supporting pole for supporting cables, wires and/or electrical components. The supporting pole is formed of one or more fiber reinforced plastic resin laminates, wherein the one or more laminates comprise: a first ply, the first ply comprising unidirectional fibers, the unidirectional fibers having a first Young's modulus, and a second ply, the second ply comprising chopped fibers, the chopped fibers having a second Young's modulus; wherein the first Young's modulus is greater than the second Young's modulus, and wherein the unidirectional fibers in the laminate are at least 70 wt % of the fibers in the laminate.

Classes IPC  ?

  • B29C 41/04 - Coulée par rotation ou par centrifugation, c.-à-d. revêtement de la surface interne d'un moule par rotation du moule
  • B29C 41/22 - Fabrication d'objets multicouches ou polychromes
  • B29C 41/46 - Chauffage ou refroidissement
  • B29C 70/08 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts comprenant uniquement des renforcements, p. ex. matières plastiques auto-renforçantes des renforcements fibreux uniquement comprenant des combinaisons de différentes formes de renforcements fibreux incorporés dans une matrice, formant une ou plusieurs couches, avec ou sans couches non renforcées
  • B29K 67/00 - Utilisation de polyesters comme matière de moulage
  • B29K 105/10 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts de grande longueur, p. ex. ficelles, mèches, mats, tissus ou fils orientés
  • B29K 105/12 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts de longueur réduite, p. ex. filaments coupés, fibres coupées ou crins
  • B29K 309/08 - Verre
  • B29L 23/00 - Objets tubulaires
  • B29L 31/00 - Autres objets particuliers
  • B32B 1/08 - Produits tubulaires
  • B32B 27/08 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique d'une résine synthétique d'une sorte différente
  • B32B 27/36 - Produits stratifiés composés essentiellement de résine synthétique comprenant des polyesters

99.

MULTILAYER STRUCTURE WITH ENHANCED WALKABILITY

      
Numéro d'application 18527882
Statut En instance
Date de dépôt 2023-12-04
Date de la première publication 2024-06-06
Propriétaire Owens Corning Intellectual Capital, LLC (USA)
Inventeur(s)
  • Pruzinsky, Stephanie
  • Vido, Martin
  • Newsome, Toni
  • Shaeffer, Brian
  • Cortes-Medina, Marcos
  • Nogaj, Melissa
  • Maxson, Stephanie
  • Pham, Dinh Chi

Abrégé

A roofing underlayment with enhanced walkability is provided. The roofing underlayment has a reinforcement, a film, and a plurality of gripping structures. The gripping structures are disposed on at least a portion of a first film surface of the film. The roofing underlayment has at least one of a coefficient of friction of between about 1.2 and about 1.8 when tested in dry condition using COF method 1, a coefficient of friction of between about 0.8 and about 1.5 when tested in wet condition using COF method 1, and a coefficient of friction of between about 0.5 and about 1.2 using COF method 1.

Classes IPC  ?

  • E04D 12/00 - Supports non structurels pour matériaux de couverture, p. ex. voliges, planches
  • B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 27/12 - Produits stratifiés composés essentiellement de résine synthétique adjacente à une couche fibreuse ou filamenteuse

100.

METHODS OF INCREASING SCRAP GLASS RECYCLING

      
Numéro d'application US2023081516
Numéro de publication 2024/118711
Statut Délivré - en vigueur
Date de dépôt 2023-11-29
Date de publication 2024-06-06
Propriétaire
  • OWENS CORNING INTELLECTUAL CAPITAL, LLC (USA)
  • PITTSBURGH CORNING EUROPE NV (Belgique)
Inventeur(s)
  • Verlaak, Stijn
  • Boehmer, Joelle
  • Badger, Steven R.

Abrégé

22) to amounts above those that are used in conventional manufacturing processes, while also maintaining important physical properties in the ultimate cellular glass product.

Classes IPC  ?

  • C03C 1/00 - Ingrédients généralement utilisés pour la fabrication des verres, glaçures ou émaux vitreux
  • C03C 3/087 - Compositions pour la fabrication du verre contenant de la silice avec 40 à 90% en poids de silice contenant de l'oxyde d'aluminium ou un composé du fer contenant un oxyde d'un métal divalent contenant de l'oxyde de calcium, p. ex. verre à vitre ordinaire ou verre pour récipients creux
  • C03C 11/00 - Verre alvéolé
  1     2     3     ...     17        Prochaine page