A wearable eyewear device, methods of use and systems are described that allow a person wearing the eyewear device to accurately measure the intraocular pressure of their eye, and dispense a medication to the eye when needed.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A61M 35/00 - Dispositifs pour appliquer des agents, p. ex. des remèdes, sur le corps humain
A microfluidic strain sensing device for monitoring intraocular pressure. The device has a contact lens and a closed microfluidic network embedded with the contact lens. The network has a volume that is sensitive to an applied strain. The network distinguishes: (i) a gas reservoir containing a gas, (ii) a liquid reservoir containing a liquid that changes volume when the strain is applied, and (iii) a sensing channel able to hold the liquid within the sensing channel. The sensing channel connects the gas reservoir on one end and connects the liquid reservoir on another end. The sensing channel establishes a liquid-gas equilibrium pressure interface and equilibrium within the sensing channel, which would fluidically change as a response to radius of curvature variations on a cornea, or as a response to mechanical stretching and release of the cornea. The liquid-gas equilibrium pressure interface and equilibrium are used for measuring the intraocular pressure.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A wearable eyewear device, methods of use and systems are described that allow a person wearing the eyewear device to accurately measure the intraocular pressure of their eye and dispense a medication to the eye when needed.
A61F 9/00 - Procédés ou dispositifs pour le traitement des yeuxDispositifs pour mettre en place des verres de contactDispositifs pour corriger le strabismeAppareils pour guider les aveuglesDispositifs protecteurs pour les yeux, portés sur le corps ou dans la main
A microfluidic strain sensing device for monitoring intraocular pressure. The device has a contact lens and a closed microfluidic network embedded with the contact lens. The network has a volume that is sensitive to an applied strain. The network distinguishes: (i) a gas reservoir containing a gas, (ii) a liquid reservoir containing a liquid that changes volume when the strain is applied, and (iii) a sensing channel able to hold the liquid within the sensing channel. The sensing channel connects the gas reservoir on one end and connects the liquid reservoir on another end. The sensing channel establishes a liquid-gas equilibrium pressure interface and equilibrium within the sensing channel, which would fluidically change as a response to radius of curvature variations on a cornea, or as a response to mechanical stretching and release of the cornea. The liquid-gas equilibrium pressure interface and equilibrium are used for measuring the intraocular pressure.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
Systems and methods are described for determining an intraocular pressure (IOP) of an eye using a contact lens with a magnet placed on the cornea of the eye. A magnetic field is exerted on the magnet of the contact lens, and the magnet is displaced by the magnetic field. The system of the present disclosure determines the deflection of the cornea based on the magnetic displacement of the magnet and determines the IOP of the eye.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A61B 3/00 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux
Described herein are various devices, systems and methods for measuring the intraocular pressure of an eye using a stress or pressure sensor placed on or in the eye.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A61B 5/00 - Mesure servant à établir un diagnostic Identification des individus
7.
Method and device for remote optical monitoring of intraocular pressure
A wearable eyewear device, methods of use and systems are described that allow a person wearing the eyewear device to accurately measure the intraocular pressure of their eye, and dispense a medication to the eye when needed.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A61M 35/00 - Dispositifs pour appliquer des agents, p. ex. des remèdes, sur le corps humain
A contact lens with a sensor region are described. The contact allows for normal vision and a concentric ring around the vision area of the lens includes one or more sensors for detecting changes in the interocular pressure of the eye. The data may be scanned using a camera, or in some embodiments, the data may be transmitted using a micro antenna in the sensing region. The data may be analyzed using a software application on a cell phone or other computing device.
A61B 5/00 - Mesure servant à établir un diagnostic Identification des individus
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
B29D 11/00 - Fabrication d'éléments optiques, p. ex. lentilles ou prismes
9.
Closed microfluidic network for strain sensing embedded in a contact lens to monitor intraocular pressure
A microfluidic strain sensing device for monitoring intraocular pressure. The device has a contact lens and a closed microfluidic network embedded with the contact lens. The network has a volume that is sensitive to an applied strain. The network distinguishes: (i) a gas reservoir containing a gas, (ii) a liquid reservoir containing a liquid that changes volume when the strain is applied, and (iii) a sensing channel able to hold the liquid within the sensing channel. The sensing channel connects the gas reservoir on one end and connects the liquid reservoir on another end. The sensing channel establishes a liquid-gas equilibrium pressure interface and equilibrium within the sensing channel, which would fluidically change as a response to radius of curvature variations on a cornea, or as a response to mechanical stretching and release of the cornea. The liquid-gas equilibrium pressure interface and equilibrium are used for measuring the intraocular pressure.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A method of storing a communication path between neighboring home-control networks is provided. Each home-control network includes a network controller and a plurality of network devices. Each network device is configured to transmit and receive messages using at least one of powerline signaling and radio frequency signaling. A server receives a notification from a first network controller indicating that a first network device within a first home-control network received a message transmitted from a second network device within a second home-control network. The server stores an indication of a communication path from the server to the first network device via the second home-control network in a memory of the server.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04B 3/54 - Systèmes de transmission par lignes de réseau de distribution d'énergie
A microfluidic strain sensing device for monitoring intraocular pressure. The device has a contact lens and a closed microfluidic network embedded with the contact lens. The network has a volume that is sensitive to an applied strain. The network distinguishes: (i) a gas reservoir containing a gas, (ii) a liquid reservoir containing a liquid that changes volume when the strain is applied, and (iii) a sensing channel able to hold the liquid within the sensing channel. The sensing channel connects the gas reservoir on one end and connects the liquid reservoir on another end. The sensing channel establishes a liquid-gas equilibrium pressure to interface and equilibrium within the sensing channel, which would fluidically change as a response to radius of curvature variations on a cornea, or as a response to mechanical stretching and release of the cornea. The liquid-gas equilibrium pressure interface and equilibrium are used for measuring the intraocular pressure.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
a contact lens that monitors the radius of curvature of cornea includes an amplification chamber, am annular membrane, a microfluidic channel, and a gas reservoir within a top and bottom lens layers of the contact lens. The annular membrane is positioned within the amplification chamber and is in fluid communication with the gas reservoir through the microfluidic channel. A working gas within the gas reservoir and a working fluid within the amplification chamber and the microfluidic channel create a fluid-gas equilibrium pressure interface. The curvature change of the cornea results the amplification chamber wall and the annular membrane to deflect, wherein the deflection results the fluid-gas equilibrium pressure interface baseline to change within the microfluidic channel. Then the baseline position change is recorded by an external imaging system to analysis sensitivity calculation of the cornea.
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
A61B 3/107 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour déterminer la forme ou mesurer la courbure de la cornée
13.
Acknowledgement as a propagation of messages in a simulcast mesh network
The presently described apparatus and method extends the capabilities of an Insteon network of devices. The method includes transmitting a group command message from a first device to a selected group of devices having a common group number, and receiving the group command message by a second device of the group or receiving a clean-up message transmitted by the first device, and resetting the state of the second one of the devices, and transmitting an acknowledgement message to the first devices from the second device, and receiving the first acknowledgement message by a third one of the devices that had not received the group command message or a clean-up message previously, and restoring the state of the third one of the devices.
G06F 15/16 - Associations de plusieurs calculateurs numériques comportant chacun au moins une unité arithmétique, une unité programme et un registre, p. ex. pour le traitement simultané de plusieurs programmes
A network device on a home-control network receives inputs from local sensors and physical actions from the user and determines whether to change its state.
A sensor lighting control system automatically controls lighting on a home automation network without creating unnecessary network traffic. A sensor module uses the light level to determine when a command to turn the light ON should be resent over the network.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
16.
Installation of network devices using secure broadcasting systems and methods from remote intelligent devices
Secure installation of a new device onto a home-control network uses pairing with an intelligent device. The new device receives a private key for secure communications on the home-control network from the intelligent device. For security, the private key is transmitted over a second network different from the home-control network using a communication medium such as such as optical pulses, audible tones, or short-range radio frequency signals. The new device decodes the transmission and is capable to securely communicate with other network devices and a network controller over the home-control network using the private key.
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04L 29/08 - Procédure de commande de la transmission, p.ex. procédure de commande du niveau de la liaison
H04B 3/54 - Systèmes de transmission par lignes de réseau de distribution d'énergie
H04B 7/26 - Systèmes de transmission radio, c.-à-d. utilisant un champ de rayonnement pour communication entre plusieurs postes dont au moins un est mobile
H04W 12/04 - Gestion des clés, p. ex. par architecture d’amorçage générique [GBA]
17.
Systems and methods to securely install network devices using physical confirmation
A cloud server communicates with a network controller over communication channels of a communication network to securely install a new device having a unique identifier and a device key onto a home-control network associated with a network key. The network device sends its unique identifier over the home-control network to the network controller and the network controller passes the unique identifier over the communication channels to the cloud server. the cloud server retrieves a device key associated with the network device based on the unique identifier and transmits the device key to the network controller over the communication channels. The network controller sends a message comprising the device key to the network device over the home-control network. The message is formatted to deliver the network key to the network device to permit the network device to send and receive messages comprising the network key over the home-control network.
A new network controller installed onto an existing home-control network links to a network device on the home-control network. The linked network device returns its linked list to the new network controller, which contacts each network device on the linked list. Responding network devices are linked to the new network controller and return their linked lists. The new network controller contacts the network devices on these linked lists that have not been previously contacted to request additional linked lists. The procedure continues until the new controller determines that there are no un-contacted devices.
H04L 12/24 - Dispositions pour la maintenance ou la gestion
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04L 29/08 - Procédure de commande de la transmission, p.ex. procédure de commande du niveau de la liaison
19.
Methods and systems for powerline and radio frequency communications
Disconnected from the powerline, a battery-powered receiver is configured to conserve power. The receiver communicates information between a local controller and a communication network that uses the powerline and a radio frequency (RF) band to propagate messages. An antenna wirelessly detects the presence of the powerline carrier signal that radiates into free space, which indicates a first message encoded onto the powerline. A computer processor wakes up from an inactive state based on the presence of the carrier signal and receives a second message via a second RF signal having a different frequency than the powerline carrier signal, and determines whether the device address in the second message is the assigned address of the receiver. If the message is not addressed to the receiver, the receiver returns to an inactive state.
An LED illumination device is configured to receive coded messages by at least one of radio signals in free space, electrically conducted signals by wire, and light wave propagated signals in free space, process the coded messages, and transmit the coded messages by two or more of radio signals in free space, electrically conducted signals by wire, and light wave propagated signals in free space.
An electronic window covering control system automatically controls the position and orientation of a window covering. A window covering controller interfaces with a light intensity sensor, a temperature sensor, and an electronic window covering configured to raise and lower the covering and tilt the slats. The window covering controller sends sensor data to a local receiver and receives window covering commands from the local receiver. The local receiver interfaces with a hub device through a mesh network and sends the sensor data to the hub. The hub applies a rule set to make operation decisions based on sensor data and user preferences, and sends messages comprising commands to operate the window covering through the mesh network to the local receiver. The local receiver decodes the messages and passes the window covering commands to the window covering controller to automatically control the electronic window covering.
G08C 17/02 - Dispositions pour transmettre des signaux caractérisées par l'utilisation d'une voie électrique sans fil utilisant une voie radio
G05B 15/02 - Systèmes commandés par un calculateur électriques
E06B 9/68 - Dispositifs ou mécanismes de manœuvre, p. ex. à entraînement électrique
E06B 9/24 - Écrans ou autres dispositifs protecteurs contre la lumière, notamment contre la lumière solaireÉcrans similaires pour protection de l'intimité ou pour des raisons esthétiques
An LED illumination device is configured to receive coded messages by at least one of radio signals in free space, electrically conducted signals by wire, and light wave propagated signals in free space, process the coded messages, and transmit the coded messages by two or more of radio signals in free space, electrically conducted signals by wire, and light wave propagated signals in free space.
The disclosed invention describes an unpowered apparatus which can wirelessly sense pressure based on microfluidics for point-of-care glaucoma diagnosis. Moreover, the disclosed invention teaches methods to construct the invention using microfabrication processing. Finally, a detailed and illustrative schematic of the wireless readout system is disclosed.
G01L 9/00 - Mesure de la pression permanente, ou quasi permanente d’un fluide ou d’un matériau solide fluent par des éléments électriques ou magnétiques sensibles à la pressionTransmission ou indication par des moyens électriques ou magnétiques du déplacement des éléments mécaniques sensibles à la pression, utilisés pour mesurer la pression permanente ou quasi permanente d’un fluide ou d’un matériau solide fluent
A61B 3/16 - Appareils pour l'examen optique des yeuxAppareils pour l'examen clinique des yeux du type à mesure objective, c.-à-d. instruments pour l'examen des yeux indépendamment des perceptions ou des réactions du patient pour mesurer la pression intraoculaire, p. ex. tonomètres
09 - Appareils et instruments scientifiques et électriques
Produits et services
Remote control home automation systems, namely, electric light dimmers, electric relays, programmable locking systems consisting of electronic cylindrical locksets and keypads, video monitors, radio transmitters for remote control and radio controls; remote control and automation controls for lighting, appliances, integrated security systems and for home control applications
09 - Appareils et instruments scientifiques et électriques
Produits et services
Remote control home automation systems, namely, electric light dimmers, electric relays, programmable locking systems, consisting of electronic cylindrical locksets and keypads, video monitors, radio transmitters for remote controls and radio controls; and computer software for networking home automation devices, and manuals sold therewith as a unit
26.
Mesh network of intelligent devices communicating via powerline and radio frequency
Low-cost intelligent control and communication devices are arranged to communicate with one another over one or more shared physical media, such as a powerline or a radio frequency band. No network controller is needed, because any device can act as a master, slave, or repeater. Adding more devices makes the system more robust, by virtue of a simple protocol for communication retransmissions and retries.
H04J 3/24 - Systèmes multiplex à division de temps dans lesquels l'attribution est indiquée par une adresse
H04L 12/66 - Dispositions pour la connexion entre des réseaux ayant différents types de systèmes de commutation, p. ex. passerelles
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
09 - Appareils et instruments scientifiques et électriques
35 - Publicité; Affaires commerciales
Produits et services
Remote control home automation systems, namely, electric light dimmers, electric relays, video monitors, radio transmitters for remote controls and radio controls Online retail store services featuring electronic products for home automation, improvement, and control; and mail order catalog services featuring consumer electronic products for home automation, improvement and control
