A gas recycling system, for use with a gas compressor having an inlet for gas at a relatively low pressure and an outlet for gas at a relatively high pressure, a gas-lubricated, non-contacting mechanical seal to which relatively high pressure may be fed from the gas compressor, the system including both a seal gas booster and a vent recycle system, the system further including means for feeding seal gas from the gas compressor to a conditioning system and from the conditioning system to the mechanical seal and an activation device to activate the gas booster once the gas difference exceeds a pre-determined level.
A gas recycling system for use with a gas compressor having an inlet for gas at a relatively low pressure and an outlet for gas at a relatively high pressure, a gas-lubricated, non-contacting, double mechanical seal to which relatively high pressure gas may be fed from the compressor, the gas recycling system including a seal gas booster for boosting the pressure of the gas between the compressor and the double mechanical seal.
A system and method for automatic aligning and connection of solar modules and ground structures. Installation of a solar module to a ground structure can be both labor-intensive and time-intensive. The system and method performs one or more automatic operations that may be used to install the solar module to the ground structure, including automatically orienting fasteners into a predetermined orientation; automatically moving one or both of the solar module or a part of the ground structure so that the solar module and the part of the ground structure are physically contacting/aligned; and automatically fixedly connecting the solar module and the part of the ground structure together using the fasteners with predetermined orientation.
H02S 20/10 - Structures de support directement fixées sur le sol
H02S 20/30 - Structures de support mobiles ou réglables, p. ex. pour réglage de l’angle
H02S 20/32 - Structures de support mobiles ou réglables, p. ex. pour réglage de l’angle spécialement adaptées pour le suivi du soleil
F24S 25/617 - Éléments enfoncés dans le sol, p. ex. pieux d’ancrageFondations pour supporter les élémentsConnecteurs pour joindre les supports de structures au sol ou aux surfaces plates horizontales
F24S 25/61 - Moyens de fixation, p. ex. moyens d’assemblage, spécialement adaptés pour supporter des modules de collecteurs de chaleur solaire pour ancrer au sol ou à la structure d’un bâtiment
4.
SYSTEM AND METHOD FOR AUTOMATIC ALIGNING AND CONNECTION OF SOLAR MODULES AND GROUND STRUCTURES
A system and method for automatic aligning and connection of solar modules and ground structures. Installation of a solar module to a ground structure can be both labor-intensive and time-intensive. The system and method performs one or more automatic operations that may be used to install the solar module to the ground structure, including automatically orienting fasteners into a predetermined orientation; automatically moving one or both of the solar module or a part of the ground structure so that the solar module and the part of the ground structure are physically contacting/aligned; and automatically fixedly connecting the solar module and the part of the ground structure together using the fasteners with predetermined orientation.
A system for installing a solar panel may include a first end-of-arm assembly tool coupled to a first robotic arm and part of a first assembly robot and a second end-of-arm assembly tool coupled to a second robotic arm and part of a second assembly robot. The first and the second end-of-arm assembly tools have different tooling and perform different functions to assembly solar panels to support structure. The first assembly robot and the second assembly robot may be located on autonomous and non-autonomous vehicles and the various components can be operated by a control system based on operation instructions received from a neural network.
H02M 7/42 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant alternatif sans possibilité de réversibilité
A pitch motor trolley and a method for operating a pitch motor trolley are disclosed. Wind turbines use pitch motors to change the pitch of its blade. At times, the pitch motor may need to be replaced, which can be difficult. The pitch motor trolley can move the pitch motor into/out of the hub, and includes a base structure, another structure connected to the base structure at one end and at another end to a track, and a trolley/hoist moving along the track. The base structure can be connected to a part of the nacelle for the pitch motor trolley to move the pitch motor through the nacelle into the hub (and vice versa). The base structure may also be connected to a part of the hub for the pitch motor trolley to move the pitch motor through a ceiling in the hub to the ground (and vice versa).
F03D 13/10 - Assemblage de mécanismes moteurs à ventDispositions pour l’érection de mécanismes moteurs à vent
B66C 7/02 - Chemins de roulement, voies ou voies de roulement pour chariots ou grues pour chariots ou pour grues suspendus
B66C 23/18 - Installations comportant essentiellement un palonnier, une flèche ou une structure triangulaire agissant comme bras de levier, montées de façon à permettre des mouvements de translation ou d'orientation dans des plans verticaux ou horizontaux, ou bien une combinaison de ces mouvements, p. ex. grues à flèche, derricks ou grues sur tours spécialement adaptées pour être utilisées dans des emplacements particuliers ou à des usages particuliers
B66C 23/20 - Installations comportant essentiellement un palonnier, une flèche ou une structure triangulaire agissant comme bras de levier, montées de façon à permettre des mouvements de translation ou d'orientation dans des plans verticaux ou horizontaux, ou bien une combinaison de ces mouvements, p. ex. grues à flèche, derricks ou grues sur tours spécialement adaptées pour être utilisées dans des emplacements particuliers ou à des usages particuliers avec couples d'appui assurés par des murs de bâtiments ou de constructions similaires
A rotary gas booster having a shaft (7) supported by a bearing arrangement (11,12) corrected to shaft driving means (14). The shaft drawing means are located within a chamber (8) having gas inlets and outlets. The gas booster is provided with integral gas cooling means (21).
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/40 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par un fluide
9.
SYSTEM AND METHOD FOR DETECTION OF SHADING AND SOILING ON SOLAR PANELS USING COMPUTER VISION
A method and system for detecting one or both of soiling or shading on solar panels using computer vision is disclosed. Soiling and shading may decrease the amount of energy that may be generated by a solar farm. As such, computer vision may be used to determine whether or when to act to reduce the shading or soiling may in turn increase the energy generated. The computer vision for soiling and shading may be performed in combination, such as in terms of the results of the soiling and shading analysis may be used in combination, or in terms of the analysis itself being performed in combination.
H02S 50/15 - Tests de dispositifs PV, p. ex. de modules PV ou de cellules PV individuelles utilisant des moyens optiques, e.g. utilisant l'électroluminescence
A method and system for detecting one or both of soiling or shading on solar panels using computer vision is disclosed. Soiling and shading may decrease the amount of energy that may be generated by a solar farm. As such, computer vision may be used to determine whether or when to act to reduce the shading or soiling may in turn increase the energy generated. The computer vision for soiling and shading may be performed in combination, such as in terms of the results of the soiling and shading analysis may be used in combination, or in terms of the analysis itself being performed in combination
G06T 7/136 - DécoupageDétection de bords impliquant un seuillage
G06T 7/155 - DécoupageDétection de bords impliquant des opérateurs morphologiques
G06T 7/194 - DécoupageDétection de bords impliquant une segmentation premier plan-arrière-plan
G06T 7/73 - Détermination de la position ou de l'orientation des objets ou des caméras utilisant des procédés basés sur les caractéristiques
G06T 7/90 - Détermination de caractéristiques de couleur
11.
SYSTEM AND METHOD OF DEFINING A SETPOINT FOR A THERMAL CONTROL SYSTEM OF A BATTERY BASED ON PREDICTIONS OF BATTERY STATE AND OF THE RELIABILITY OF THE TEMPERATURE CONTROL SYSTEM
A method and system for controlling a temperature control system based on both system reliability and battery state is disclosed. Batteries may supply power to places where the power grid is unavailable. The batteries may be housed in containers, with the temperature and humidity of the containers being controlled using a temperature control system. The system and method disclosed may select the temperature setpoint and humidity setpoint in order to operate the batteries within prescribed temperature and humidity values, while considering both the state of health of the batteries (e.g. the battery state of charge) and the state of health of the temperature control system (e.g., the failure of the compressors). In this way, the batteries may be operated within prescribed limits while accounting for both the health of the batteries and the health of the temperature control system.
A method and system for controlling a temperature control system based on both system reliability and battery state is disclosed. Batteries may supply power to places where the power grid is unavailable. The batteries may be housed in containers, with the temperature and humidity of the containers being controlled using a temperature control system. The system and method disclosed may select the temperature setpoint and humidity setpoint in order to operate the batteries within prescribed temperature and humidity values, while considering both the state of health of the batteries (e.g., the battery state of charge) and the state of health of the temperature control system (e.g., the failure of the compressors). In this way, the batteries may be operated within prescribed limits while accounting for both the health of the batteries and the health of the temperature control system.
H01M 10/48 - Accumulateurs combinés à des dispositions pour mesurer, tester ou indiquer l'état des éléments, p. ex. le niveau ou la densité de l'électrolyte
H01M 10/633 - Systèmes de commande caractérisés par des algorithmes, des diagrammes, des détails de logiciel ou similaires
H01M 10/6564 - Gaz avec circulation forcée, p. ex. par des soufflantes utilisant du gaz comprimé
A method and system for using a field factory for solar panel pre-assembly is disclosed. A solar farm site may be difficult to configure. Thus, a field factory proximate to the site may be used for pre-assembly. As one example, the field factory may be used to configure the solar modules, such as for electrical and/or mechanical configuration, and to test the configuration prior to transport to the solar farm site. At the site, the configured solar modules may be installed onto the torque tubes. As another example, the field factory may be used to configure the solar modules, to mechanically connect the solar modules to the torque tubes to form solar module-torque tube combinations, and to test the combinations prior to transport to the solar farm site. At the site, the solar module-torque tube combinations may be installed, either directly or indirectly, onto piles previously driven into the ground.
H02S 40/36 - Composants électriques caractérisés par des moyens d'interconnexions électriques spéciaux entre plusieurs modules PV, p. ex. connexion électrique module à module
A method and system for using a field factory for solar panel pre-assembly is disclosed. A solar farm site may be difficult to configure. Thus, a field factory proximate to the site may be used for pre-assembly. As one example, the field factory may be used to configure the solar modules, such as for electrical and/or mechanical configuration, and to test the configuration prior to transport to the solar farm site. At the site, the configured solar modules may be installed onto the torque tubes. As another example, the field factory may be used to configure the solar modules, to mechanically connect the solar modules to the torque tubes to form solar module-torque tube combinations, and to test the combinations prior to transport to the solar farm site. At the site, the solar module-torque tube combinations may be installed, either directly or indirectly, onto piles previously driven into the ground
H02S 20/10 - Structures de support directement fixées sur le sol
H02S 50/00 - Surveillance ou tests de systèmes PV, p. ex. équilibrage de charge ou identification des défauts
F16D 1/02 - Accouplements pour établir une liaison rigide entre deux arbres coaxiaux ou d'autres éléments mobiles d'une machine pour liaison bout à bout de deux arbres ou de deux pièces analogues
15.
AUTONOMOUS SOLAR INSTALLATION USING ARTIFICIAL INTELLIGENCE
G06T 3/40 - Changement d'échelle d’images complètes ou de parties d’image, p. ex. agrandissement ou rétrécissement
G06T 5/50 - Amélioration ou restauration d'image utilisant plusieurs images, p. ex. moyenne ou soustraction
H02S 50/15 - Tests de dispositifs PV, p. ex. de modules PV ou de cellules PV individuelles utilisant des moyens optiques, e.g. utilisant l'électroluminescence
16.
AUTONOMOUS SOLAR INSTALLATION USING ARTIFICIAL INTELLIGENCE
A system and method for installing solar panels are provided. The method includes obtaining an image of an in-progress solar installation. The image includes an image of one or more solar panels and one or more torque tubes. The method also includes detecting solar panel segments by inputting the image to a trained neural network that is trained to detect solar panels in poor lighting conditions. The method also includes estimating panel poses for the one or more solar panels, based on the solar panel segments, using a computer vision pipeline. The method also includes generating control signals, based on the estimated panel poses, for operating a robotic controller for installing the one or more solar panels.
A system and method for installing solar panels are provided. The method includes obtaining images of solar panels an installation structure during installation. The method also includes pre-processing the images by compensating for camera intrinsics or distortions, rectifying the images, and/or determining depth information. The method also includes detecting the solar panels by inputting the images into neural networks. The method also includes a first post-processing to compute a first panel pose based on an output of the neural networks. The method also includes generating control signals, based on the first panel pose, for operating a robotic controller for installing the solar panels. In some embodiments, the method also includes homography transforms to obtain a second panel pose, based on the first panel pose and visual patterns or fiducials on a solar panel, and generating the control signals further based on the second panel pose.
H02S 50/15 - Tests de dispositifs PV, p. ex. de modules PV ou de cellules PV individuelles utilisant des moyens optiques, e.g. utilisant l'électroluminescence
G06T 5/50 - Amélioration ou restauration d'image utilisant plusieurs images, p. ex. moyenne ou soustraction
G06T 3/40 - Changement d'échelle d’images complètes ou de parties d’image, p. ex. agrandissement ou rétrécissement
19.
AUTONOMOUS SOLAR INSTALLATION USING ARTIFICIAL INTELLIGENCE
A system and method for installing solar panels are provided. The method obtains an image of a solar panel during an in-progress solar installation and estimates features of the solar panel based on a first image using distance simulation, geometric correction, and/or angular adjustment. The method also generates control signals, based on the estimated features, for operating a robotic controller for picking the solar panel. The method also obtains a second image of the solar panel when the solar panel is in a perspective view and detects placement of the solar panel based on the image by determining if the solar panel is co-planar with and at a predetermined offset from a fixed solar panel. Based on the detected placement, control signals are generated for operating a second robotic controller for aligning the solar panel with the fixed solar panel.
A system and method for installing solar panels are provided. The method includes obtaining images of solar panels an installation structure during installation. The method also includes pre-processing the images by compensating for camera intrinsics or distortions, rectifying the images, and/or determining depth information. The method also includes detecting the solar panels by inputting the images into neural networks. The method also includes a first post-processing to compute a first panel pose based on an output of the neural networks. The method also includes generating control signals, based on the first panel pose, for operating a robotic controller for installing the solar panels. In some embodiments, the method also includes homography transforms to obtain a second panel pose, based on the first panel pose and visual patterns or fiducials on a solar panel, and generating the control signals further based on the second panel pose.
G06V 10/82 - Dispositions pour la reconnaissance ou la compréhension d’images ou de vidéos utilisant la reconnaissance de formes ou l’apprentissage automatique utilisant les réseaux neuronaux
G06T 7/73 - Détermination de la position ou de l'orientation des objets ou des caméras utilisant des procédés basés sur les caractéristiques
G06T 7/194 - DécoupageDétection de bords impliquant une segmentation premier plan-arrière-plan
G06V 10/44 - Extraction de caractéristiques locales par analyse des parties du motif, p. ex. par détection d’arêtes, de contours, de boucles, d’angles, de barres ou d’intersectionsAnalyse de connectivité, p. ex. de composantes connectées
G06V 10/26 - Segmentation de formes dans le champ d’imageDécoupage ou fusion d’éléments d’image visant à établir la région de motif, p. ex. techniques de regroupementDétection d’occlusion
G05B 19/4155 - Commande numérique [CN], c.-à-d. machines fonctionnant automatiquement, en particulier machines-outils, p. ex. dans un milieu de fabrication industriel, afin d'effectuer un positionnement, un mouvement ou des actions coordonnées au moyen de données d'un programme sous forme numérique caractérisée par le déroulement du programme, c.-à-d. le déroulement d'un programme de pièce ou le déroulement d'une fonction machine, p. ex. choix d'un programme
21.
AUTONOMOUS SOLAR INSTALLATION USING ARTIFICIAL INTELLIGENCE
A system and method for installing solar panels are provided. The method obtains an image of a solar panel during an in-progress solar installation and estimates features of the solar panel based on a first image using distance simulation, geometric correction, and/or angular adjustment. The method also generates control signals, based on the estimated features, for operating a robotic controller for picking the solar panel. The method also obtains a second image of the solar panel when the solar panel is in a perspective view and detects placement of the solar panel based on the image by determining if the solar panel is co-planar with and at a predetermined offset from a fixed solar panel. Based on the detected placement, control signals are generated for operating a second robotic controller for aligning the solar panel with the fixed solar panel.
A method and system for operating a wind farm by reconciling performance and operational constraints is disclosed. A wind farm may be subject to wakes, thereby reducing performance. In order to lessen the effects of wakes, wake steering of the wind turbines may be performed. Specifically, both an operationally-independent analysis (such as by using a computational fluid dynamic model) and an operationally-dependent analysis may be performed, and the outputs of each analysis may be reconciled in order to determine whether (and how much) to wake steer
F03D 7/02 - Commande des mécanismes moteurs à vent les mécanismes moteurs à vent ayant l'axe de rotation sensiblement parallèle au flux d'air pénétrant dans le rotor
A method and system for operating a wind farm by reconciling performance and operational constraints is disclosed. A wind farm may be subject to wakes, thereby reducing performance In order to lessen the effects of wakes, wake steering of the wind turbines may be performed. Specifically, both an operationally-independent analysis (such as by using a computational fluid dynamic model) and an operationally-dependent analysis may be performed, and the outputs of each analysis may be reconciled in order to determine whether (and how much) to wake steer.
F03D 7/02 - Commande des mécanismes moteurs à vent les mécanismes moteurs à vent ayant l'axe de rotation sensiblement parallèle au flux d'air pénétrant dans le rotor
04 - Huiles et graisses industrielles; lubrifiants; combustibles
09 - Appareils et instruments scientifiques et électriques
41 - Éducation, divertissements, activités sportives et culturelles
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Industrial lubricants and industrial greases Vibration and noise monitoring, measuring and recording apparatus for use in connection with industrial machinery and pipework; downloadable computer software for use in vibration and noise detection in connection with industrial machinery and pipework; downloadable computer software being part of computer controlled apparatus or instruments for use in vibration and noise detection in connection with industrial machinery and pipework; apparatus for supervising lubrication and grease temperature, namely, temperature sensors; vibration sensors; acoustic emissions sensors; vibration management apparatus for the purpose of data recording, namely, electronic data recorders and vibration meters; apparatus and instruments for lubrication, fluid management, condition monitoring, bearing condition monitoring and leak detection, monitoring, structural monitoring and testing of industrial machinery and pipework, including those for the assessment of pipework vibration assessment and acoustic emissions; handheld computers incorporating vibration data collectors Educational services, namely providing classes, seminars and workshops in the field of lubrication, fluid management, condition monitoring, bearing condition monitoring and leak detection, monitoring, structural monitoring and testing of industrial machinery and pipework; engineering training, namely, training in condition monitoring, acoustic emission and vibration analysis, lubrication management, condition-based maintenance, dynamic balancing, thermography, noise assessment, noise and vibration control and management Technical expertise services and technical advice in relation to vibration and noise detection in connection with industrial machinery and pipework ; product research and development; industrial design; industrial research, namely, technical project studies and research in vibration and noise detection in connection with industrial machinery and pipework; engineering consulting services in relation to maintenance management in the field of vibration and noise detection in connection with industrial machinery and pipework noise and vibration testing in the field of vibration and noise detection in connection with industrial machinery and pipework; assessing of pipework vibration and assessing and acoustic emissions
25.
SYSTEM AND METHOD FOR DETERMINING AN OPERATING CONDITION OF A WIND TURBINE
An exemplary system for determining an operating condition for a wind turbine having a rotor, generator, and gearbox, includes a plurality of sensors mounted within the nacelle of the wind turbine. The system also includes a pair proximity sensors are mounted adjacent to the rotor for measuring rotor displacement. A first processor is connected to receive sensor data from the pair of proximity sensors and is configured to partition the received sensor data into predefined datasets, and a second processor configured to format the predefined datasets for transmission over a network to a processing computer.
An exemplary system for determining an operating condition for a wind turbine having a rotor, generator, and gearbox, includes a plurality of sensors mounted within the nacelle of the wind turbine. The system also includes a pair proximity sensors are mounted adjacent to the rotor for measuring rotor displacement. A first processor is connected to receive sensor data from the pair of proximity sensors and is configured to partition the received sensor data into predefined datasets, and a second processor configured to format the predefined datasets for transmission over a network to a processing computer.
A system for installing a solar panel may include a first end-of-arm assembly tool coupled to a first robotic arm and part of a first assembly robot and a second end-of-arm assembly tool coupled to a second robotic arm and part of a second assembly robot. The first and the second end-of-arm assembly tools have different tooling and perform different functions to assembly solar panels to support structure. The first assembly robot and the second assembly robot may be located on autonomous and non-autonomous vehicles and the various components can be operated by a control system based on operation instructions received from a neural network.
B60P 1/48 - Véhicules destinés principalement au transport des charges et modifiés pour faciliter le chargement, la fixation de la charge ou son déchargement utilisant des bras articulés s'élevant au-dessus de l'élément supportant ou contenant la charge
F24S 25/634 - Éléments de serrageÉléments encliquetables
H02S 10/00 - Centrales électriques PVCombinaisons de systèmes d’énergie PV avec d’autres systèmes pour la production d’énergie électrique
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Financial services, namely, investment advisory services,
investment management services, asset management services,
and capital investment services, all in connection with
raising and managing third party capital to invest in energy
assets. Construction, maintenance, and repair of energy storage,
generation, transmission, management, and distribution
facilities; technical maintenance of energy storage
installations for others for the purpose of physical storage
and later distribution. Electricity supply services, namely, the transmission,
distribution, and storage of energy, electricity, and
natural gas for others; logistics services consisting of the
storage, transport and delivery of energy, electricity, and
natural gas; provision of information, advice and
consultancy services relating to energy transmission,
distribution, transport and storage. Generation of energy using steam, water, wind, or solar
technology; generation of energy through energy storage;
generation of electricity for other utility and energy
storage providers or commercial and industrial customers;
provision of information, advice and consultancy services
relating to energy generation; generation of clean energy in
industrial, commercial, and residential settings; design of
technology for the generation or storage of energy using
steam, water, wind, or solar technology. Design of technology for the generation, transmission,
management, distribution, or storage of energy using steam,
water, wind, or solar; development of new technology for
others for the supply, transmission, management, and
distribution of electricity through industrial
digitalization; providing temporary use of online,
non-downloadable software featuring algorithms to
personalize and optimize the delivery, management, and
consumption of electricity or gas; providing temporary use
of online, non-downloadable software featuring algorithms to
personalize and optimize the interface with electricity or
gas utilities; providing temporary use of online,
non-downloadable software featuring algorithms encouraging
promotion and adoption of clean, efficient energy
technology.
A system for installing a solar panel may include a first end-of-arm assembly tool coupled to a first robotic arm and part of a first assembly robot and a second end-of-arm assembly tool coupled to a second robotic arm and part of a second assembly robot. The first and the second end-of-arm assembly tools have different tooling and perform different functions to assembly solar panels to support structure. The first assembly robot and the second assembly robot may be located on autonomous and non-autonomous vehicles and the various components can be operated by a control system based on operation instructions received from a neural network.
B23P 19/00 - Machines effectuant simplement l'assemblage ou la séparation de pièces ou d'objets métalliques entre eux ou des pièces métalliques avec des pièces non métalliques, que cela entraîne ou non une certaine déformationOutils ou dispositifs à cet effet dans la mesure où ils ne sont pas prévus dans d'autres classes
B25J 5/00 - Manipulateurs montés sur roues ou sur support mobile
H02M 7/42 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant alternatif sans possibilité de réversibilité
H02S 99/00 - Matière non prévue dans les autres groupes de la présente sous-classe
Apparatus for manufacturing at least two products which have different physical specifications comprises: (A) a handling robot (10) comprising means for holding one of a plurality of differing items of tooling and means for transferring said item to a manufacturing machine; (B) means for changing said holding means to suit the tooling required for a particular product; (C) a plurality of manufacturing machines (12); (i) each of which is capable of holding an item of tooling selected from a plurality of different items of tooling and (ii) each of which is in operative communication with the handling robot; (D) means for inspecting a workpiece placed in the vicinity of the handling robot and for feeding data relating to the physical characteristics of the workpiece to a controller robot to enable the handling robot to determine its suitability for the manufacture of at least one of said products; and (E) a controller for holding data relating to the manufacturing steps for both of said products and configured to effect the manufacture of each of said products by determining the manufacturing machines to be used, the sequence of their operation and the tooling with which each is provided. A process using such apparatus is also described.
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; Custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
37 - Services de construction; extraction minière; installation et réparation
Produits et services
Mechanical seals; parts and fittings therefor. Packing and stopping materials; waterproof packings; expansion joint fillers; rubber rings, rubber sleeves for protecting parts of machines; gaskets; O-rings; sealant compounds for joints. Installation, maintenance and repair of mechanical seals.
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Financial services, namely, investment advisory services, investment management services, asset management services, and capital investment services, all in connection with raising and managing third party capital to invest in energy assets Construction, maintenance, and repair of energy storage, generation, transmission, management, and distribution facilities Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, or solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; custom fabrication or custom manufacture of technology for the generation or storage of energy using steam, water, wind, or solar Design of technology for the generation, transmission, management, distribution, or storage of energy using steam, water, wind, or solar; development of new technology for others for the supply, transmission, management, and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
A system for installing a solar panel may include an end of arm assembly tool and a linear guide assembly coupled to the end of arm assembly tool. The end of arm assembly tool includes a frame and plurality of attachment devices, such as suction cups, coupled to the frame. The linear guide assembly includes a linearly moveable clamping tool including an engagement member configured to engage a clamp assembly slidably coupled to an installation structure, and a force torque transducer configured to move the clamping tool along the installation structure. A controller configured to control the force torque transducer and the plurality of attachment devices. The end of arm assembly tool is coupled to a robotic arm and is part of an assembly robot that includes autonomous and non-autonomous vehicles. The various components can be operated by a control system based on operation instructions received from a neural network.
F24S 25/00 - Agencement de montages ou de supports fixes pour des modules de collecteurs de chaleur solaire
F24S 25/63 - Moyens de fixation, p. ex. moyens d’assemblage, spécialement adaptés pour supporter des modules de collecteurs de chaleur solaire pour fixer les modules ou leurs cadres périphériques aux éléments de support
F24S 25/634 - Éléments de serrageÉléments encliquetables
H02S 20/00 - Structures de support pour modules PV
A system for installing a solar panel may include an end of arm assembly tool and a linear guide assembly coupled to the end of arm assembly tool. The end of arm assembly tool includes a frame and plurality of attachment devices, such as suction cups, coupled to the frame. The linear guide assembly includes a linearly moveable clamping tool including an engagement member configured to engage a clamp assembly slidably coupled to an installation structure, and a force torque transducer configured to move the clamping tool along the installation structure. A controller configured to control the force torque transducer and the plurality of attachment devices. The end of arm assembly tool is coupled to a robotic arm and is part of an assembly robot that includes autonomous and non-autonomous vehicles. The various components can be operated by a control system based on operation instructions received from a neural network.
H02S 20/00 - Structures de support pour modules PV
F24S 25/00 - Agencement de montages ou de supports fixes pour des modules de collecteurs de chaleur solaire
F24S 25/63 - Moyens de fixation, p. ex. moyens d’assemblage, spécialement adaptés pour supporter des modules de collecteurs de chaleur solaire pour fixer les modules ou leurs cadres périphériques aux éléments de support
F24S 25/634 - Éléments de serrageÉléments encliquetables
A system for installing a solar panel may include an end of arm assembly tool and a linear guide assembly coupled to the end of arm assembly tool. The end of arm assembly tool includes a frame and plurality of attachment devices, such as suction cups, coupled to the frame. The linear guide assembly includes a linearly moveable clamping tool including an engagement member configured to engage a clamp assembly slidably coupled to an installation structure, and a force torque transducer configured to move the clamping tool along the installation structure. A controller configured to control the force torque transducer and the plurality of attachment devices. The end of arm assembly tool is coupled to a robotic arm and is part of an assembly robot that includes autonomous and non-autonomous vehicles. The various components can be operated by a control system based on operation instructions received from a neural network.
H01S 4/00 - Dispositifs utilisant l’émission stimulée de rayonnement électromagnétique dans des gammes d’ondes autres que celles couvertes par les groupes , ou , p. ex. masers à phonon, lasers à rayons X ou lasers gamma
H02S 99/00 - Matière non prévue dans les autres groupes de la présente sous-classe
09 - Appareils et instruments scientifiques et électriques
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Software, algorithms, and sensors to personalize and optimize the delivery, management, and consumption of electricity or gas; software, algorithms, and sensors to personalize and optimize the interface with electricity or gas utilities; software, algorithms, and sensors encouraging promotion and adoption of clean, efficient energy technology. Financial services, namely, investment advisory services, investment management services, asset management services, and capital investment services, all in connection with raising and managing third party capital to invest in energy assets. Construction, maintenance, and repair of energy storage, generation, transmission management, and distribution facilities using drones and robotics. Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; logistics services consisting of the storage, transport and delivery of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; energy storage as a source of energy; distribution of renewable energy. Generation of energy using steam, water, wind, and solar technology; generation of electricity for other utility and energy storage providers or commercial and industrial customers; generation of clean energy in industrial, commercial, and residential settings; provision of information, advice and consultancy services relating to energy generation. Design and development of new technology for others in the field of energy production and electricity generation from steam, water, wind and solar energy or storage of energy; development of new technology for others for the supply, transmission and distribution of electricity through industrial digitalization; technical supervision and inspection of energy storage installations for others for the purpose of physical storage and later distribution; advisory services relating to the use of natural energy in industrial, commercial, and residential settings; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology.
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Research advisory services relating to environmental pollution; research advisory services relating to environmental protection; consulting services in the field of environmental assessment and planning; greenhouse gas emission measuring and analysis; advisory services relating to safety of the environment, namely, weather forecasting; technological planning and consulting services in the field of renewable energy resources; scientific research advisory and consultancy services in the field of renewable energy; environmentally friendly technology adoption and implementation advice and consultancy services, namely, planning, design and implementation of environmentally friendly computer technologies for others; technological research consultancy and advisory services in the field of renewable energy resources; product safety testing advisory services for the renewable energy industry; environmental surveys; technical survey consulting in the field of carbon emission detection; research in the reduction of carbon emission and carbon offsetting; providing scientific information, advice and consultancy in the field of carbon emission reduction and carbon offsetting
44.
SYSTEM AND METHOD FOR DETERMINING AN OPERATING CONDITION OF A WIND TURBINE
An exemplary system for determining an operating condition for a wind turbine having a rotor, generator, and gearbox, includes a plurality of sensors mounted within the nacelle of the wind turbine. The system also includes a pair of proximity sensors are mounted adjacent to the rotor for measuring rotor displacement. A first processor is connected to receive sensor data from the pair of proximity sensors and is configured to partition the received sensor data into predefined datasets, and a second processor configured to format the predefined datasets for transmission over a network to a processing computer.
F03D 7/02 - Commande des mécanismes moteurs à vent les mécanismes moteurs à vent ayant l'axe de rotation sensiblement parallèle au flux d'air pénétrant dans le rotor
An exemplary system for determining an operating condition for a wind turbine having a rotor, generator, and gearbox, includes a plurality of sensors mounted within the nacelle of the wind turbine. The system also includes a pair of proximity sensors are mounted adjacent to the rotor for measuring rotor displacement. A first processor is connected to receive sensor data from the pair of proximity sensors and is configured to partition the received sensor data into predefined datasets, and a second processor configured to format the predefined datasets for transmission over a network to a processing computer.
F03D 7/02 - Commande des mécanismes moteurs à vent les mécanismes moteurs à vent ayant l'axe de rotation sensiblement parallèle au flux d'air pénétrant dans le rotor
F03D 11/00 - Détails, parties constitutives ou accessoires non couverts par les autres groupes de la présente sous-classe ou présentant un intérêt autre que celui visé par ces groupes
A method of managing energy service for a plurality of assets of different types connected to a plurality of grid connection points includes determining, by a respective asset, a quantity of the energy service to be realized by the respective asset during a connection event; responsive to the respective asset being of a first type; detecting a grid connection point identifier that identifies an associated grid connection point associated with the respective asset of the first type used for the connection event; and sending, by the respective asset, connection event information, wherein the connection event information includes at least one of: the determined quantity of the energy service and an asset identifier, responsive to the respective asset not being of the first type; or the determined quantity of the energy service and the detected grid connection point identifier, responsive to the respective asset being of the first type.
B60L 53/16 - Connecteurs, p. ex. fiches ou prises, spécialement adaptés pour recharger des véhicules électriques
B60L 3/00 - Dispositifs électriques de sécurité sur véhicules propulsés électriquementContrôle des paramètres de fonctionnement, p. ex. de la vitesse, de la décélération ou de la consommation d’énergie
B60L 3/04 - Coupure de l'alimentation en énergie en cas de fausse manœuvre
B60L 53/18 - Câbles spécialement adaptés pour recharger des véhicules électriques
B60L 53/30 - Détails de construction des stations de charge
B60L 53/31 - Colonnes de charge spécialement adaptées aux véhicules électriques
B60L 53/62 - Surveillance et commande des stations de charge en réponse à des paramètres de charge, p. ex. courant, tension ou charge électrique
B60L 53/63 - Surveillance et commande des stations de charge en réponse à la capacité du réseau
B60L 53/65 - Surveillance et commande des stations de charge impliquant l'identification des véhicules ou de leurs types de batteries
B60L 53/66 - Transfert de données entre les stations de charge et le véhicule
B60L 53/68 - Surveillance ou commande hors site, p. ex. télécommande
B60L 55/00 - Dispositions relatives à la fourniture d'énergie emmagasinée dans un véhicule à un réseau électrique, c.-à-d. du véhicule au réseau [V2G]
G06Q 10/06 - Ressources, gestion de tâches, des ressources humaines ou de projetsPlanification d’entreprise ou d’organisationModélisation d’entreprise ou d’organisation
G07F 15/00 - Appareils déclenchés par pièces de monnaie avec distribution de liquide, de gaz ou d'électricité commandée par le comptage
H02J 4/00 - Circuits pour réseaux principaux ou de distribution, la nature alternative ou continue du courant n'étant pas précisée
H02J 7/00 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries
H02J 13/00 - Circuits pour pourvoir à l'indication à distance des conditions d'un réseau, p. ex. un enregistrement instantané des conditions d'ouverture ou de fermeture de chaque sectionneur du réseauCircuits pour pourvoir à la commande à distance des moyens de commutation dans un réseau de distribution d'énergie, p. ex. mise en ou hors circuit de consommateurs de courant par l'utilisation de signaux d'impulsion codés transmis par le réseau
B60L 58/12 - Procédés ou agencements de circuits pour surveiller ou commander des batteries ou des piles à combustible, spécialement adaptés pour des véhicules électriques pour la surveillance et la commande des batteries en fonction de l'état de charge [SoC]
B60W 10/26 - Commande conjuguée de sous-ensembles de véhicule, de fonction ou de type différents comprenant la commande des moyens de stockage d'énergie pour l'énergie électrique, p. ex. des batteries ou des condensateurs
G06Q 20/40 - Autorisation, p. ex. identification du payeur ou du bénéficiaire, vérification des références du client ou du magasinExamen et approbation des payeurs, p. ex. contrôle des lignes de crédit ou des listes négatives
09 - Appareils et instruments scientifiques et électriques
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Software, algorithms, and sensors to personalize and
optimize the delivery, management, and consumption of
electricity or gas; software, algorithms, and sensors to
personalize and optimize the interface with electricity or
gas utilities; software, algorithms, and sensors encouraging
promotion and adoption of clean, efficient energy
technology. Financial services, namely, investment advisory services,
investment management services, asset management services,
and capital investment services, all in connection with
raising and managing third party capital to invest in energy
assets. Construction, maintenance, and repair of energy storage,
generation, transmission management, and distribution
facilities using drones and robotics. Electricity supply services, namely, the transmission,
distribution, and storage of energy, electricity, and
natural gas for others; logistics services consisting of the
storage, transport and delivery of energy, electricity, and
natural gas; provision of information, advice and
consultancy services relating to energy transmission,
distribution, transport and storage; energy storage as a
source of energy; distribution of renewable energy. Generation of energy using steam, water, wind, and solar
technology; generation of electricity for other utility and
energy storage providers or commercial and industrial
customers; generation of clean energy in industrial,
commercial, and residential settings; provision of
information, advice and consultancy services relating to
energy generation. Fabrication and design of new technology for the production,
generation or storage of energy using steam, water, wind,
and solar (terms too vague in the opinion of the
International Bureau – Rule 13 (2) (b) of the Regulations);
development of new technology for others for the supply,
transmission and distribution of electricity through
industrial digitalization; technical operation of energy
storage installations for others for the purpose of physical
storage and later distribution (terms too vague in the
opinion of the International Bureau – Rule 13 (2) (b) of the
Regulations); advisory services relating to the use of
natural energy in industrial, commercial, and residential
settings; providing temporary use of online,
non-downloadable software featuring algorithms to
personalize and optimize the delivery, management, and
consumption of electricity or gas; providing temporary use
of online, non-downloadable software featuring algorithms to
personalize and optimize the interface with electricity or
gas utilities; providing temporary use of online,
non-downloadable software featuring algorithms encouraging
promotion and adoption of clean, efficient energy
technology.
09 - Appareils et instruments scientifiques et électriques
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Software, algorithms, and sensors to personalize and
optimize the delivery, management, and consumption of
electricity or gas; software, algorithms, and sensors to
personalize and optimize the interface with electricity or
gas utilities; software, algorithms, and sensors encouraging
promotion and adoption of clean, efficient energy
technology. Financial services, namely, investment advisory services,
investment management services, asset management services,
and capital investment services, all in connection with
raising and managing third party capital to invest in energy
assets. Construction, maintenance, and repair of energy storage,
generation, transmission management, and distribution
facilities using drones and robotics. Electricity supply services, namely, the transmission,
distribution, and storage of energy, electricity, and
natural gas for others; logistics services consisting of the
storage, transport and delivery of energy, electricity, and
natural gas; provision of information, advice and
consultancy services relating to energy transmission,
distribution, transport and storage; energy storage as a
source of energy; distribution of renewable energy. Generation of energy using steam, water, wind, and solar
technology; generation of electricity for other utility and
energy storage providers or commercial and industrial
customers; generation of clean energy in industrial,
commercial, and residential settings; provision of
information, advice and consultancy services relating to
energy generation. Fabrication and design of new technology for the production,
generation or storage of energy using steam, water, wind,
and solar; development of new technology for others for the
supply, transmission and distribution of electricity through
industrial digitalization; technical operation of energy
storage installations for others for the purpose of physical
storage and later distribution; advisory services relating
to the use of natural energy in industrial, commercial, and
residential settings; providing temporary use of online,
non- downloadable software featuring algorithms to
personalize and optimize the delivery, management, and
consumption of electricity or gas; providing temporary use
of online, non-downloadable software featuring algorithms to
personalize and optimize the interface with electricity or
gas utilities; providing temporary use of online,
non-downloadable software featuring algorithms encouraging
promotion and adoption of clean, efficient energy
technology.
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
(1) Electrical engineering; consulting services in the field of electrical systems, namely, main electrical systems for residential, commercial, institutional and civic buildings, community antenna television (CATV) systems, telephone systems, energy distribution systems, lighting systems, fire alarm systems, lighting controls, communications systems, audio visual systems, security systems, door enterphone systems, community antenna television (CATV) cabling systems, computer technology systems, electric vehicle (EV) infrastructure and charging systems for residential, commercial, institutional and civic buildings, and coordination with local utilities; technical services in the field of electrical engineering, namely, testing of electrical equipment for use in residential, commercial, industrial and civic applications; design of electrical systems, namely, main electrical systems for residential, commercial, institutional and civic buildings, community antenna television (CATV) systems, telephone systems, energy distribution systems, lighting systems, fire alarm systems, lighting controls, communications systems, audio visual systems, security systems, door enterphone systems, community antenna television (CATV) cabling system, computer technology systems, electric vehicle (EV) infrastructure and charging systems for residential, commercial, institutional and civic buildings, and coordination with local utilities; engineering and project management services, namely consulting, pre-feasibility and feasibility studies, preliminary and detailed engineering, technical layout, development, construction, procurement and construction management project, process design, basic design, detailed design, modeling design, design review, monitoring of construction, start-up, commissioning and operation in the field of electrical engineering; design services in the field of renewable power generation systems; design services and consultancy services in the field of residential and commercial lighting systems and architectural lighting; and design services in the field of security systems, audio visual systems, lighting controls, building maintenance systems, telephone systems, active network data systems, and electric vehicles (EV) charging systems for residential and commercial properties
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Financial services, namely, investment advisory services, investment management services, asset management services, and capital investment services, all in connection with raising and managing third party capital to invest in energy assets Construction, maintenance, and repair of energy storage, generation, transmission management, and distribution facilities using drones and robotics Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, and solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; Fabrication or manufacture of technology for the generation or storage of energy using steam, water, wind, and solar Design of technology for the generation or storage of energy using steam, water, wind, and solar; development of new technology for others for the supply, transmission and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
36 - Services financiers, assurances et affaires immobilières
37 - Services de construction; extraction minière; installation et réparation
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Financial services, namely, investment advisory services, investment management services, asset management services, and capital investment services, all in connection with raising and managing third party capital to invest in energy assets Construction, maintenance, and repair of energy storage, generation, transmission management, and distribution facilities using drones and robotics Electricity supply services, namely, the transmission, distribution, and storage of energy, electricity, and natural gas for others; electricity management services, namely, arranging the transmission, distribution, and storage of energy, electricity, and natural gas; provision of information, advice and consultancy services relating to energy transmission, distribution, transport and storage; technical operation of energy storage installations for others for the purpose of physical storage and later distribution Electricity supply services, namely, the generation of energy using steam, water, wind, and solar technology; generation of energy through energy storage; electricity management services, namely, the generation of electricity for other utility and energy storage providers or commercial and industrial customers; provision of information, advice and consultancy services relating to energy generation; generation of clean energy in industrial, commercial, and residential settings; Fabrication or manufacture of technology for the generation or storage of energy using steam, water, wind, and solar Design of technology for the generation or storage of energy using steam, water, wind, and solar; development of new technology for others for the supply, transmission and distribution of electricity through industrial digitalization; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the delivery, management, and consumption of electricity or gas; providing temporary use of online, non-downloadable software featuring algorithms to personalize and optimize the interface with electricity or gas utilities; providing temporary use of online, non-downloadable software featuring algorithms encouraging promotion and adoption of clean, efficient energy technology
52.
UTILITY-SCALE RENEWABLE PEAKER PLANT, TIGHTLY COUPLED SOLAR PV AND ENERGY STORAGE
An exemplary power system includes a DC power bus and a photovoltaic system connected to the DC power bus. An energy storage system is connected to the DC power bus and stores energy injected to the DC power bus by the photovoltaic system. A power inverter is connected to the DC power bus and converts power between the DC power bus and an AC connected load. The power system also includes a control system that receives power system data from one or more sub-systems and devices connected to the DC power bus, and controls, in real-time, one or more of the power inverter and the energy storage system to act as a load on the DC power bus based on the received power system data.
H02J 3/28 - Dispositions pour l'équilibrage de charge dans un réseau par emmagasinage d'énergie
H02J 3/16 - Circuits pour réseaux principaux ou de distribution, à courant alternatif pour règler la tension dans des réseaux à courant alternatif par changement d'une caractéristique de la charge du réseau par réglage de puissance réactive
A mechanical seal includes a drive ring having an axially extending drive element and a seal face with an outer substantially cylindrical surface that is provided with a corresponding radially reduced portion that is can be engaged by the drive element, in which the radially reduced portion is a flat surface that is, in transverse section a chord, and the drive element is provided with a flat surface that can engage with the flat surface of the radially reduced portion during driving rotation of the seal face by the drive ring.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
09 - Appareils et instruments scientifiques et électriques
35 - Publicité; Affaires commerciales
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
(1) Vibration apparatus, namely vibration sensors for the detection, storage, processing, and recording of electronic vibration data, which is made accessible to users via a website, computers, and mobile devices; Vibration meters; apparatus and instruments for regulating the structural integrity of buildings and industrial machines, namely, sensors, recorders, computer hardware for measuring, recording and storing data related to building and machinery visual defects, vibration, thermal imaging and lubrication levels, which is made accessible to users via a website, computers, and mobile devices; Compact discs, DVDs, blank optical disks, and USB flash drives for storing electronic vibration, thermal imaging, visual defect, lubrication level data; computer hardware, handheld computers and downloadable computer software for collection, processing and storage of vibration, thermal imaging, lubrication levels, visual defect data of buildings and machinery (1) Business management; Business administration.
(2) Providing software as a service (SAAS) services featuring software for collection, processing and storage of data relating to vibration, thermal imaging, lubrication levels, and visual defects of buildings and machinery via a website; scientific and technological services and research and design, namely, research, analysis, advisory and consultancy services relating to inspections and analysis of vibration data within structural buildings and within machines; Industrial analysis and research services relating to structural integrity of buildings and industrial machines; Design and development of computer hardware and software relating to all foresaid services
A bearing protector includes a static component fixed relative to a housing, in which a stationary sealing face profile is retained and a rotational component for fixing relative to a shaft with the static and rotational components held axially relative to each other. The rotational component has an annular sealing face profile energized by way of one or more magnetic elements retained within the static component to generate a positive sealing face contact between the stationary sealing face and rotational sealing face profiles. The magnets elements are held within recesses in the static component and extend radially inwards of the recesses.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16C 33/78 - Dispositifs d'étanchéité pour roulements à billes ou à rouleaux avec diaphragme, disque ou bague, avec ou sans parties élastiques
F16J 15/3252 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par joints élastiques, p. ex. joints toriques pourvus d’armatures ou de supports avec armatures ou supports rigides
A manhole cover including: a frame located at the edges of the manhole cover which completely surrounds the manhole cover; a plurality of slats that are spaced apart and parallel to each other; a plurality of lateral bracings that are spaced apart and parallel to each other, wherein the lateral bracings are perpendicular to the slats; and a hinged access portion located in the center of the manhole cover that is connected to a main portion of the manhole cover by a hinge, and all edges of the hinged access portion are spaced away from the frame.
04 - Huiles et graisses industrielles; lubrifiants; combustibles
06 - Métaux communs et minerais; objets en métal
07 - Machines et machines-outils
09 - Appareils et instruments scientifiques et électriques
41 - Éducation, divertissements, activités sportives et culturelles
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Industrial oils and greases, lubricants. Pipework of metal including those from alloy steel and titanium. Machines and machine tools for treatment of materials and for manufacturing. Scientific research and laboratory apparatus, educational apparatus and simulators. Education and instruction. Testing, authentication and quality control.
A mechanical seal support system for a sealing device for sealing a piece of industrial equipment, includes a mechanical seal for sealing the piece of industrial equipment and a system vessel for containing barrier fluid for the mechanical seal and being circumferentially split into a plurality of sections detachably attached for retaining pressure. The system vessel includes a clean-in-place (CIP) assembly, a cooling element and device for sterilizing the system vessel. The device for sterilizing the a heating element is formed as a coiled tubular element for the barrier fluid to pass therethrough, with closed-loop pipe work included for connecting the system vessel to the mechanical seal and a drain and filling device for removing and adding the barrier fluid to the system vessel.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
A bearing isolator apparatus is for use in a piece of equipment which includes a rotatable shaft and a housing through which the shaft extends. The apparatus includes a static component for securing to the housing and a rotational component for securing to the shaft. A tortuous fluid path extends between the static component and the rotational component and a plurality of electrically conductive filaments extends between the static component and the rotational component, such that an electrical current can pass between the components. One or more conductive members electrically connect the rotor to the shaft.
H02K 11/40 - Association structurelle à des dispositifs de mise à la terre
H02K 5/10 - Enveloppes ou enceintes caractérisées par leur configuration, leur forme ou leur construction avec des dispositions empêchant l'introduction de corps étrangers, p. ex. de l'eau ou des doigts
A mechanical seal assembly has two axially-spaced apart seals and including a rotary component that includes rotational members of each axially-spaced apart seal and a stationary component that includes stationary sealing members of each seal. A sleeve is located radially inwards of the rotational sealing members. An element, such as fluid ports, directs barrier or buffer fluid towards the sleeve and between the two axially-spaced apart seals. The sleeve is provided on its outer surface with means, such as recesses or protuberances, which displace barrier/buffer fluid axially towards both axially-spaced apart seals.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/16 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre
A mechanical seal includes an elastomeric member, a spring biasing member, a longitudinally floating first member, a longitudinally non-floating second member, a longitudinally floating third member and a longitudinally floating seal face. The elastomeric member is in sealing engagement with the seal face and the first and second members and the spring biasing member is longitudinally pointed between the seal face and the third member. The first and second members are longitudinally restrained and rotationally coupled by male longitudinally protruding portions engaging with female portions.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/36 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties reliée par un diaphragme à l'autre partie
A bearing isolator device is for use in a piece of equipment which includes a rotatable shaft and a housing through which the shaft extends. The device includes a static component (4) for securing to the housing and a rotational component (1) for securing to the shaft. A tortuous fluid path (19, 20, 21) extends between the static component and the rotational component and a plurality of electrically conductive filaments extends between the static component and the rotational component such that an electrical current can pass between said components. One or more conductive members electrically connect the rotor to the shaft.
A method for controlling a wind turbine via an ultrasonic wind sensor includes: transmitting, by a first ultrasonic transceiver, an ultrasonic packet at a first time and receiving, by a second ultrasonic transceiver, the ultrasonic packet at a second time; identifying wind properties based on the first time and the second time; transmitting the identified wind properties to a programmable logic controller (PLC) interfaced with the wind sensor and a turbine controller, wherein the interface with the turbine controller includes one of a plurality of communication topologies; processing the identified wind properties for output to the turbine controller based on a specific communication topology, wherein the PLC is configured to process the identified wind properties for output based on each of the plurality of communication topologies; transmitting the processed wind properties to the turbine controller; and controlling, by the turbine controller, a wind turbine based on the wind properties.
A pipe clamp includes a first jaw pivotally connected to a second jaw, each jaw having a connection flange at each of its ends, in which the flanges at the pivoting end of the jaws are provided with a first locking mechanism and the flanges of the jaws distal from the pivoting end provided with second and third locking mechanisms. The second and third locking mechanisms are shaped such that, when they are in place, the combined width of the second and third locking mechanisms is less than twice the width of their widest crossways section in the same plane when not in place.
F16L 23/08 - Raccords à brides les brides étant raccordées par des organes tendus dans le plan radial raccordées par broche et écrou fileté disposés tangentiellement
F16B 2/10 - Brides ou colliers, c.-à-d. dispositifs de fixation dont le serrage est effectué par des forces effectives autres que la résistance à la déformation inhérente au matériau dont est fait le dispositif externes c.-à-d. agissant par contraction utilisant des mâchoires sur pivot
A seal support system, for use in combination with a mechanical seal installed on a piece of rotating equipment, includes a pressure vessel, one or more fluid inlets and connecting pipework between the one or more fluid inlets and the mechanical seal. A device is included to alter the fluid flow, so that a portion of the seal support system may be isolated for various purposes, such as, for example, cleaning or repurposing.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16K 21/04 - Obturateurs à fermeture automatique, c.-à-d. se fermant d'eux-même après fonctionnement
A bearing lubrication apparatus for use with a piece of rotating equipment includes a lubrication device having a bearing chamber with bearings located in the bearing chamber, a mist generating unit positioned below the bearing chamber and being in fluid communication with the bearing chamber, at least one mist inlet directed into the bearing chamber and being in fluid communication with the mist generating unit, and a coalescing unit adjacent the bearing chamber.
A mechanical seal for providing a fluid-tight seal between relatively rotatable elements includes a stationary part for securing to a housing, which has a stationary seal face, a rotary part for securing to a shaft, which includes a rotary seal face, a spring urging the rotary seal face into engagement with the stationary seal face and a toroidal sealing member between the rotary component and the shaft. The toroidal sealing member is accommodated within a recess of the rotary part, and the recess is defined by two members of which the first rotary part member includes the seal face and a second rotary part member is positioned between the first rotary part member and the spring.
F16J 15/36 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties reliée par un diaphragme à l'autre partie
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/38 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties rendue étanche par une garniture
A seal support system for a mechanical seal includes a system vessel for containing barrier fluid. Closed loop pipe work connects the vessel to a mechanical seal with a device provided for feeding barrier fluid to the system vessel. A further vessel is provided that is able to be in fluid communication with the system vessel. The further vessel may be provided with an elastomeric membrane, which may be filled with a gas under pressure to an extent required to allow for the effect of the highest anticipated temperature which might occur in a particular application.
F16J 15/40 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par un fluide
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
A mechanical seal comprises an elastomeric member (3), a spring biasing member (8), a longitudinally floating first member (5), a longitudinally non-floating second member (4), a longitudinally floating third member (9) and a longitudinally floating seal face (7). The elastomeric member is in sealing engagement with the seal face and the first and second members and the spring biasing member is longitudinally pointed between the seal face and the third member. The first and second members are longitudinally restrained and rotationally coupled by male longitudinally protruding portions (12) engaging with female portions (11).
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/36 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties reliée par un diaphragme à l'autre partie
A mechanical seal includes an elastomeric member, a spring biasing device, a longitudinally floating first member having a seal face, a longitudinally non-floating second member and a longitudinally floating third member. The elastomeric member is in sealing engagement with the first member, second member and third member and the spring biasing device is longitudinally positioned between the first member and the second member. One of either the first member or the second member is provided with at least one protruding male portion and the other member of either the first member or the second member is provided with corresponding female portion into which the male portion locates.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/36 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties reliée par un diaphragme à l'autre partie
04 - Huiles et graisses industrielles; lubrifiants; combustibles
06 - Métaux communs et minerais; objets en métal
07 - Machines et machines-outils
09 - Appareils et instruments scientifiques et électriques
41 - Éducation, divertissements, activités sportives et culturelles
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Industrial oils and greases, lubricants. Pipework of metal including those from alloy steel and titanium. Machines and machine tools for treatment of materials and for manufacturing. Scientific research and laboratory apparatus, educational apparatus and simulators. Education and instruction. Testing, authentication and quality control.
e. one or more setting members which are detachably attached to said clamping ring to restrict axial movement and make the internal dimensions independent of tolerances and assembly accuracy.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
A mechanical seal support system includes a bladder accumulator with a first connection to the top of the bladder accumulator and a second connection to the bottom of the bladder accumulator with a device that is responsive to the pressures at each of the first and second connections of the bladder accumulator for providing an output determined by the difference between the pressures. The mechanical seal support system further includes a display for displaying the output in a manner indicative of the volume of the fluid in the bladder accumulator relative to a predetermined volume.
F16J 15/40 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par un fluide
F15B 1/02 - Installations ou systèmes comprenant des accumulateurs
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
An isolator device (1) for use in controlling fluid flow, wherein the isolator device comprises a static component (5) fixed relative to the housing (2) and a rotational component (4) fixed relative to a shaft (3). The static component and rotational components are held axially relative to each other and an annular sealing member (6, 7, 8) is provided. The annual sealing member has a first position in contact with both the static component and the rotational component and a second position in contact with either or both of the static component and the rotational component. The profile of the static and rotational components are shaped to create a flow path between them and the flow path comprises at least one feature to slow the flow of fluid there through.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
A pipework brace comprising a first pipework engaging member and a second engaging member. A first tubular strut and a second tubular strut are provided and the first tubular strut is attached to the first and second engaging members by connectors located at each end of the first tubular strut. The second tubular strut is connected to the first and second engaging members by connectors located at each end of the second tubular strut. The connectors each comprise two clamp members that are arranged to allow multi-axis rotation so that each end of the strut may be moved in at least two planes relative to the pipe work engaging members.
F16L 3/08 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers entourant pratiquement le tuyau, le câble ou le conduit de protection
F16L 3/015 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers pour supporter ou guider les tuyaux, les câbles ou les conduits de protection entre des points mobiles les uns par rapport aux autres, p. ex. canaux mobiles utilisant des éléments des guidage articulés ou souples
F16L 55/04 - Dispositifs amortisseurs de vibrations ou de pulsations dans les fluides
F16L 55/045 - Dispositifs amortisseurs de vibrations ou de pulsations dans les fluides spécialement conçus pour prévenir ou atténuer les effets des coups de bélier
F16L 3/10 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers entourant pratiquement le tuyau, le câble ou le conduit de protection fractionnés, c.-à-d. à deux éléments en prise avec le tuyau, le câble ou le conduit de protection
F16L 3/12 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers entourant pratiquement le tuyau, le câble ou le conduit de protection comportant un élément entourant pratiquement le tuyau, le câble ou le conduit de protection
F16L 3/16 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers avec disposition particulière permettant au tuyau de bouger
F16L 3/127 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers entourant pratiquement le tuyau, le câble ou le conduit de protection comportant un élément entourant pratiquement le tuyau, le câble ou le conduit de protection et faisant un angle avec la surface de fixation
F16F 15/02 - Suppression des vibrations dans les systèmes non rotatifs, p. ex. dans des systèmes alternatifsSuppression des vibrations dans les systèmes rotatifs par l'utilisation d'organes ne se déplaçant pas avec le système rotatif
H02G 7/14 - Aménagements ou dispositifs pour amortir les oscillations mécaniques des lignes, p. ex. pour réduire le bruit
F16L 3/18 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers avec disposition particulière permettant au tuyau de bouger permettant un mouvement selon l'axe
F16L 3/20 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers avec disposition particulière permettant au tuyau de bouger permettant un mouvement latéral
F16L 3/237 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers spécialement adaptés pour supporter un certain nombre de tuyaux parallèles séparés par un espace pour deux tuyaux
F16L 55/035 - Absorbeurs de bruit sous forme de potences ou de supports spécialement adaptés
The invention relates to a seal system comprising a stationary assembly having an angled profile, and a rotary assembly comprising a resiliently flexible rotary elastomeric member. When in a rest position, the rotary elastomeric member contacts the angled profile of the stationary assembly to seal a gap therebetween. On rotation of the rotary elastomeric member, the gap between the assemblies is opened to allow fluid flow therethrough.
F16J 15/3256 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par joints élastiques, p. ex. joints toriques pourvus d’armatures ou de supports avec armatures ou supports rigides comprenant deux éléments d’armature ou de support, individuellement fixés sur chacune des surfaces, p. ex. joints de type cartouche
F16J 15/16 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre
A barrier system for a dual mechanical seal, the system comprising means for controlling barrier fluid pressure relative to product pressure. The pressure control means comprises means for monitoring the volume of barrier fluid in the system and for supplying additional fluid to the system to maintain the volume within a desired range. The system further comprises means for maintaining the barrier fluid pressure at a pre-determined pressure above product pressure.
A seal support system for use with a sealing device (3) employed to seal a piece of industrial equipment. The seal support system comprises a system vessel (1) for containing barrier fluid, a closed loop pipe work (7) to connect the aforementioned system vessel to a sealing device, such as a mechanical seal, and drain (21) and filling means (20) for removing and adding barrier fluid to the system vessel. The vessel, containing a fluid, and being connected to a sealing device in a closed loop system is circumferentially split into two or more sections which are detachably attached such that they may retain pressure when in assembled state and includes, but is not limited to, any permutation of CIP assembly, heating element and cooling element of which all or any of may or may not be controlled externally.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/40 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par un fluide
An annular seal cavity throat bushing includes an inner annular surface having a substantially latitudinal channel with the channel being provided with at least one orifice to allow fluid communication between the inside of the bushing and the outside of the bushing. The bushing is further provided with at least one groove extending substantially longitudinally from one end of the bushing to the channel. The groove has at least one tapered edge which increases the width of the groove along its length.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/18 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par presse-étoupes pour garnitures élastiques ou plastiques
A valve includes a housing having a fluid inlet and a fluid outlet defines a fluid flow path between the fluid inlet and the fluid outlet. A device is included for restricting the flow between the inlet and the outlet which has a fixed flow restriction device for applying a pre-determined counter-flow pressure and a device for applying an additional counter-flow pressure according to the pressure in an environment external to the valve.
F16K 17/36 - Soupapes ou clapets de sûretéSoupapes ou clapets d'équilibrage fonctionnant sous l'action de circonstances extérieures, p. ex. un choc, un changement de position
The invention relates to a mechanical seal wherein any or all of the outermost stationary components is provided with means for indicating the presence or change of fluid composition and/or the temperature of the mechanical seal.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
A mechanical seal for providing a fluid-tight seal between relatively rotatable elements (1, 2). The seal comprises a stationary part for securing to a housing, which comprises a stationary seal face (5), a rotary part for securing to a shaft, which comprises a rotary seal face (20), a spring (18) urging the rotary seal face (20) into engagement with the stationary seal face (5) and a toroidal sealing member (19) between the rotary component (17) and the shaft (2). The toroidal sealing member is accommodated within a recess of the rotary part, and the recess is defined by two members of which the first rotary part member comprises the seal face (20) and a second rotary member part (15) is positioned between the first rotary part member and the spring (18).
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/38 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties rendue étanche par une garniture
A modular mechanical seal (10) for use in hygienic and aseptic applications containing minimal/no bug traps in which bacteria and pathogens could grow. The seal assembly comprising: a longitudinally floating first seal face member; a longitudinally static second seal face member; a baising means urging first seal face member to contact with the second seal face member; a longitudinally static shaft location member; a first sealing member and a second sealing member.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
The invention relates to a condition monitoring device for attachment to a machine and for monitoring the condition thereof. It comprises at least one sensor for monitoring at least one parameter of the machine; a processor connected to the at least one sensor for analysing the signals produced therefrom; a wireless transmitter and a wireless receiver connected to the processor and allowing external communication therewith; and a battery connected to the processor. Additionally, the device further comprises at least one visual indicator of the status of the monitored machine based upon the sensed parameter. The invention extends to a system for putting the device into effect
G01H 1/12 - Mesure des vibrations dans des solides en utilisant la conduction directe au détecteur les vibrations étant longitudinales ou non spécifiées
A device is for supporting within a coating chamber a mechanical seal face (8) having an annular sealing surface. The device includes a frame (1 ) housing first support means (9) for supporting the seal face when the device is in a first orientation with the annular sealing surface resting on a surface of said first support means. Second support means (2) within the frame supports the seal face when the device is in a second orientation.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
C23C 16/458 - Revêtement chimique par décomposition de composés gazeux, ne laissant pas de produits de réaction du matériau de la surface dans le revêtement, c.-à-d. procédés de dépôt chimique en phase vapeur [CVD] caractérisé par le procédé de revêtement caractérisé par le procédé utilisé pour supporter les substrats dans la chambre de réaction
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Electricity supply services, namely, the transmission and distribution of electricity and steam for others; electricity management services, namely, arranging the transmission, storage and distribution of electricity and steam; provision of information, advice and consultancy services relating to energy distribution, transport and storage. Electricity supply services, namely, the generation of electricity and steam for others; wind power for the generation of electricity; electricity management services, namely the generation of electricity for other utility and energy storage providers for use during peak electrical usage periods; provision of information, advice and consultancy relating to energy production and generation.
90.
FREQUENCY RESPONSIVE CHARGE SUSTAINING CONTROL OF ELECTRICITY STORAGE SYSTEMS FOR ANCILLARY SERVICES ON AN ELECTRICAL POWER GRID
Approaches for managing and maintaining a state of charge of an energy storage device by adjusting (biasing) responses to electrical grid operator commands to perform ancillary services are disclosed. In embodiments, methods and systems regulate a set point regulation in an energy system. In an embodiment, a method determines when the set point needs to be changed, calculates a new set point, and moves the output of the system from an old set point to the new set point at a defined ramp rate. The method then incorporates, as part of a set point algorithm, the capability to restore the energy storage device to a desirable state of charge (SOC). Embodiments implement Dynamic Bias, SOC and Signal Bias Range Maintaining, Operational Limits, and Fixed Signal Bias algorithms and perform Intelligent Algorithm Selection to manage and maintain the SOC of an energy storage device by biasing responses to grid operator commands.
H02J 3/36 - Dispositions pour le transfert de puissance électrique entre réseaux à courant alternatif par l'intermédiaire de haute tension à courant continu
A mechanical seal comprises an elastomeric member (2), a spring biasing means (7), a longitudinally non-floating first member (4), a longitudinally floating second member (5) and a longitudinally floating seal face (6). The elastomeric member is in sealing engagement with the seal face and the first and second members. The spring biasing means is longitudinally positioned between the seal face and the second member. One of the first and second members is provided with at least one longitudinally protruding male portion (12) and the other of said first and second members is provided with a corresponding female portion (13) into which the male portion is positively engageable so as to restrict the relative longitudinal movement between the members.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/36 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties reliée par un diaphragme à l'autre partie
39 - Services de transport, emballage et entreposage; organisation de voyages
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Electricity supply services, namely, the transmission and
distribution of electricity and steam for others;
electricity management services, namely, arranging the
transmission, storage and distribution of electricity and
steam; provision of information, advice and consultancy
services relating to energy distribution, transport and
storage. Electricity supply services, namely, the generation of
electricity and steam for others; wind power for the
generation of electricity; electricity management services,
namely the generation of electricity for other utility and
energy storage providers for use during peak electrical
usage periods; provision of information, advice and
consultancy relating to energy production and generation.
A pressure regulation tracking valve for maintaining the pressure of a gas relative to that of a process fluid includes a device, responsive to change in the pressure of the process fluid, for changing the pressure of the gas by substantially the same amount. The valve further includes a device for accommodating a pressure transfer medium for transferring the pressure of the process fluid to the gas pressure changing device. As a result, contact between the process fluid and the gas pressure changing device is avoided.
Approaches for controlling power supplied to an electric grid are disclosed. In embodiments, methods and systems control power supplied to an electric grid using an energy storage device. In an embodiment, a method receives an indication of power to be supplied to the electric grid, generates power from a power generator and adjusts, using the generated power, an energy level of the energy storage device to control power supplied to the grid in accordance with the received indication. In another embodiment, a system comprises a grid indication receiver for receiving an indication of power to be supplied to the electric grid; a power generator connected to the grid; an energy storage device coupled to the power generator; and a controller for adjusting, using the generated power from the generator, an energy level of the energy storage device to control power supplied to the grid in accordance with the received indication.
H02J 3/36 - Dispositions pour le transfert de puissance électrique entre réseaux à courant alternatif par l'intermédiaire de haute tension à courant continu
95.
METHOD AND APPARATUS FOR CONTROLLING ENERGY SERVICES BASED ON MARKET DATA
ABSTRACT OF THE DISCLOSURE Apparatus, systems, computer readable media and methods for controlling power realized by energy service equipment based on market data are disclosed. A method simulates execution of control models, as simulation results; selects one of the control models during a first period; and controls operation of the energy services equipment in a second period, using the selected control model. According to an exemplary apparatus, each control model is based on a set of changing market data and controls operation of energy service equipment. A system controls power realized from different energy service equipment using market data. The system includes a model processor that simulates execution of model sets using market data to generate a simulation result; a model selector that selects a model of each set based on simulation results; and a processor that controls operation of the different energy service equipment using the selected model of each respective model set.
H02J 3/12 - Circuits pour réseaux principaux ou de distribution, à courant alternatif pour règler la tension dans des réseaux à courant alternatif par changement d'une caractéristique de la charge du réseau
A seal support system, or a kit therefor, for use with a sealing device to seal a piece of industrial equipment, includes a stand with fixed support elements for accommodating selected functional components with different sizes of components being accommodated by differently sized pipework elements. The stand has one or more substantially fixed brackets with each bracket having a component securing device at predetermined longitudinal space intervals.
F16J 15/34 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par bague glissante pressée contre la face plus ou moins radiale d'une des deux parties
F16J 15/40 - Joints d'étanchéité entre deux surfaces mobiles l'une par rapport à l'autre par un fluide
97.
Methods and adapters for use with electric devices to manage energy services
Methods and adapters for realizing energy services by a device via a grid connection point are disclosed. An adapter includes a detection unit for measuring a quantity of energy services realized by a mobile device; an identification unit for detecting the identifier of the grid connection point electrically connected to the device; and a communication unit to report connection event information including: quantity of the energy service realized by the device; an identifier associated with the adapter; and the identifier of the grid connection point. In another embodiment, a method receives an energy service signal indicating operating set points for a mobile device; communicates the indicated operating set points to the device; and measures a quantity of energy services realized by the device. The method communicates quantity information of energy services realized by the device and sends updated operating set points for the device based on the communicated quantity information.
G06Q 99/00 - Matière non couverte par les autres groupes de la présente sous-classe
B60L 11/18 - utilisant de l'énergie fournie par des piles primaires, des piles secondaires ou des piles à combustibles
B60L 3/00 - Dispositifs électriques de sécurité sur véhicules propulsés électriquementContrôle des paramètres de fonctionnement, p. ex. de la vitesse, de la décélération ou de la consommation d’énergie
B60L 3/04 - Coupure de l'alimentation en énergie en cas de fausse manœuvre
An electrical outlet, an electrical outlet cover for use with an electrical outlet and methods of identifying a grid connection point for bill processing of a charging event and managing energy services are disclosed. The electrical outlet cover includes a cover unit having a receptacle opening configured to align with a receptacle of the electric outlet and an identification unit configured to present a unique identification that is associated with the electrical outlet. In an embodiment, a method includes establishing an identity tag at a grid connection point (GCP) that unique identifies the GCP, receiving identity tag information to uniquely identify the GCP and monitoring charge event information indicating attributes of the charging event. The method further includes associating the charge event information with the identity tag information, as associated information; and sending the associated information for reconciliation of billing accounts associated with the GCP and the mobile charging device.
B60L 11/18 - utilisant de l'énergie fournie par des piles primaires, des piles secondaires ou des piles à combustibles
B60L 3/00 - Dispositifs électriques de sécurité sur véhicules propulsés électriquementContrôle des paramètres de fonctionnement, p. ex. de la vitesse, de la décélération ou de la consommation d’énergie
B60L 3/04 - Coupure de l'alimentation en énergie en cas de fausse manœuvre
Methods and apparatus for managing energy services are disclosed. One method includes: reporting, by a respective asset of the first type, an identifier associated with a grid connection point that establishes a location of the respective asset of the first type at the grid connection point on the electric grid; receiving, by the respective asset of the first type, operating conditions for realizing the energy service, the received conditions being based on the established location of the respective asset of the first type on the grid; and operating the respective asset of the first type in accordance with the received operating conditions to realize the energy service. An energy service controller includes a communication unit for receiving, from a mobile asset, an identifier associated with a grid connection point connected to the asset and a processor for determining a location of the asset on the grid based on the identifier.
G06F 1/26 - Alimentation en énergie électrique, p. ex. régulation à cet effet
B60L 11/18 - utilisant de l'énergie fournie par des piles primaires, des piles secondaires ou des piles à combustibles
B60L 3/00 - Dispositifs électriques de sécurité sur véhicules propulsés électriquementContrôle des paramètres de fonctionnement, p. ex. de la vitesse, de la décélération ou de la consommation d’énergie
B60L 3/04 - Coupure de l'alimentation en énergie en cas de fausse manœuvre
G07F 15/00 - Appareils déclenchés par pièces de monnaie avec distribution de liquide, de gaz ou d'électricité commandée par le comptage
G06Q 40/00 - FinanceAssuranceStratégies fiscalesTraitement des impôts sur les sociétés ou sur le revenu
G06Q 10/06 - Ressources, gestion de tâches, des ressources humaines ou de projetsPlanification d’entreprise ou d’organisationModélisation d’entreprise ou d’organisation
B60W 10/26 - Commande conjuguée de sous-ensembles de véhicule, de fonction ou de type différents comprenant la commande des moyens de stockage d'énergie pour l'énergie électrique, p. ex. des batteries ou des condensateurs
G06Q 20/40 - Autorisation, p. ex. identification du payeur ou du bénéficiaire, vérification des références du client ou du magasinExamen et approbation des payeurs, p. ex. contrôle des lignes de crédit ou des listes négatives
100.
METHODS, ADAPTERS, AND APPARATUS FOR USE WITH ELECTRIC DEVICES TO MANAGE ENERGY SERVICES
Methods and systems for managing an energy service supplied by a mobile asset to an electric grid are disclosed. In an embodiment, a method receives an energy storage device for powering a mobile asset, couples the energy storage device to an electric grid during a connection event, realizes the energy services from the connected energy storage device to the electric grid, determines a quantity of the energy service realized by the energy storage device during the connection event, and reports the determined quantity of energy services realized and a unique identifier of the energy storage device. In another embodiment, an adapter includes a detection unit for measuring a quantity of energy services realized by a mobile device; an identification unit for detecting the identifier of a grid connection point electrically connected to the device; and a communication unit, coupled to detectors, to report connection event information.
G06Q 50/00 - Technologies de l’information et de la communication [TIC] spécialement adaptées à la mise en œuvre des procédés d’affaires d’un secteur particulier d’activité économique, p. ex. aux services d’utilité publique ou au tourisme
H02J 7/00 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries
B60L 11/18 - utilisant de l'énergie fournie par des piles primaires, des piles secondaires ou des piles à combustibles
