Produits et services

(1) Waterproofing chemical compositions for articles of masonry, tile, and other building and constructions surfaces, such as swimming pools, interior building surfaces, and exterior building surfaces; Latex and acrylic polymer additives for use in mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Adhesive and bonding materials for building purposes, namely, cement mixes for installing tile, brick, stone, and concrete (2) Paint primer for concrete, tile, wood, stone and masonry; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy coating for sealing concrete surfaces; penetrating paint sealer coatings for use on concrete; paint sealer coatings for use in sealing, densifying and hardening concrete surfaces, namely, acrylic-based and water-based curing and sealing compounds being paints, primers, and varnish; oil and water repellant paint sealer preparations for the preservation of stone, concrete and masonry; paints, namely, acrylic paints, anti-corrosive paints, ceramic paints, interior and exterior paints, floor paints, oil paints, primer paints, weatherproofing coatings in the form of paints; colorants, Colorants, namely, colorants for concrete, colorants for use in the manufacture of paint; stains, namely, stains for use on floors, wood stains, wood preservatives and stains, leather stains, coating compositions in the nature of interior and exterior stains for architectural applications; pigments, namely, interior and exterior paint pigments; primers, namely, acrylic primers, paint primers; colorants for concrete (3) Under-floor radiant floor heating system comprised of electric floor heating coils floor heating thermostat, and an electric wire fault indicator sold together as a unit; Electric floor heating systems, namely, cables, electric mats, and electric heat detection sensors sold as a unit (4) Pre-formed shower systems and shower products, namely, shower niches in the nature of shower cubicles; Shower pans in the nature of shower bases; Plumbing fittings, namely, shower drains; Under-floor radiant floor heating system comprised of mat; Electric floor heating systems, namely, electric mats (5) Waterproofing membranes used in building construction; Adhesive sealant used on concrete, mortar, brick, and stone for construction purposes; Polyurethane-based fabrics for use in sealing and insulating buildings; Acoustical insulation for buildings; Weatherizing membranes and vapor barriers, namely, laminated vapor barriers, plastic sheeting used in the construction industry as a vapor barrier, roof underlayment for use as a vapor barrier, insulating waterproofing membranes; Caulking compounds; Chemical bonding preparations for industrial purposes, namely, latex polymer admixture bonding agent for concrete, mortar, plaster, tile, brick, stone, marble, and grout for use in building; Latex additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Waterproofing membranes in liquid polymer rubber chemical form for use in the construction, repair, and maintenance of buildings; sealing compounds for concrete, tile, wood, stone and masonry; Waterproofing membranes for roofing, floors and walls; Waterproofing membranes for use as a floor underlayment; Building materials, namely, waterproofing liquid, composites of liquid latex blended or mixed with hydraulic cement and fillers such as wood chips, inert chemicals, for concrete, chipped stone, or marble that are used to forma composite building material for use as floors, walls, ceilings, wainscoting, or insulation or to repair areas therein (6) Epoxy grout; Adhesive and bonding materials for building purposes, namely, mortar, grout, and asphalt-based mastic for installing tile, brick, stone, and concrete ; Plaster for building purposes; Stucco for building purposes; Cement boards for building, namely, cement excelsior boards, fiber cement boards, wood-fiber reinforced cement boards; Cement and sand mixtures for building purposes; Flooring underlayments (7) Shower benches and seats for permanent installation into shower enclosures

Produits et services

Chemical bonding preparations for industrial purposes, namely, latex polymer admixture bonding agent for concrete, mortar, plaster, tile, brick, stone, marble, and grout for use in building; Waterproofing chemical compositions for articles of masonry, tile, and other building and constructions surfaces, such as swimming pools, interior building surfaces, and exterior building surfaces; Polymeric additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Latex additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Waterproofing membranes in liquid polymer rubber chemical form for use in the construction, repair, and maintenance of buildings; Building materials, namely, waterproofing membrane in liquid chemical form comprised of composites of liquid latex blended or mixed with hydraulic cement and fillers such as wood chips, inert chemicals, chipped stone, or marble for use in construction, namely, for floors, walls, ceilings, and wainscoting, or insulation or to repair areas therein. Primer and sealing agents for concrete, tile, wood, stone and masonry; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy for sealing concrete surfaces; penetrating sealer coatings for use on concrete; sealer coatings comprised of acrylic- and water-based curing and sealing compounds for use in sealing, densifying and hardening concrete surfaces; oil and water repellant and sealer preparations for stone, concrete and masonry; paints; colorants; Coatings in the nature of stains; pigments; primers; colorants for concrete. Pre-formed shower systems and shower products, namely, shower niches in the nature of shower cubicles; Shower pans in the nature of shower bases; Plumbing fittings, namely, shower drains; Shower benches and seats for permanent installation into shower enclosures; Under-floor radiant floor heating system comprised of electric floor heating coils, mat, floor heating thermostat, and an electric wire fault indicator sold together as a unit; Electric floor heating systems, namely, cables, electric mats, and sensors sold as a unit. Waterproofing membranes used in building construction; Adhesive sealant used on concrete, mortar, brick, and stone for construction purposes; Polyurethane-based fabrics for use in sealing and insulating buildings; Acoustical insulation for buildings; Weatherizing membranes and vapor barriers; Caulking compounds. Epoxy grout; Adhesive and bonding materials for building purposes, namely, mortar, grout, mastic, and cement for installing tile, brick, stone, and other surface coverings; Plaster for building purposes; Stucco tiles for building purposes; Cement boards for building; Cement and sand mixtures for building purposes; Flooring underlayments; Waterproofing membranes for roofing, floors and walls; Waterproofing membranes for use as a floor underlayment

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate, such as, floors, walls and ceilings. The support plate has a plurality of spaced apart raised portions and recesses in the plate material, and a plurality of openings extending through the top surface and bottom surface of the plate material. The openings exposing a mat layer attached to the bottom of the support plate. Support plates of the invention are used for tile installations between a substrate and tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the openings forming a continuous bond between the mortar, openings and mat layer to provide a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate, such as, floors, walls and ceilings. The support plate has a plurality of spaced apart raised portions and recesses in the plate material, and a plurality of openings extending through the top surface and bottom surface of the plate material. The openings exposing a mat layer attached to the bottom of the support plate. Support plates of the invention are used for tile installations between a substrate and tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the openings forming a continuous bond between the mortar, openings and mat layer to provide a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre

Abrégé

Dispersion-based ready-to-use grout formulations, methods of making such dispersion-based ready-to-use grout formulations, and the resultant grout products that perform as reactive resin grout products. The grout formulations of the invention at least include a water-based acrylic polymer dispersion binder and optionally a water-based acrylate copolymer dispersion binder, in combination with one or more of an alkaline cross-linker, one or more silane adhesion promoters and/or a micro-fiber filler, along with various other constituents, to provide one-part ready-to-use grout formulations that require no mixing prior to use thereof. The resultant grout products of the invention meet performance standards of epoxy grout products, without requiring mixing of composition parts and without any adverse side effects.

Classes IPC  ?

• C04B 26/06 - Acrylates
• C04B 14/06 - QuartzSable
• C04B 14/28 - Carbonates de calcium
• C04B 14/30 - Oxydes autres que la silice
• C04B 14/42 - Verre
• C04B 18/14 - DéchetsRésidus provenant de procédés métallurgiques
• C04B 24/02 - AlcoolsPhénolsÉthers
• C04B 24/12 - Composés contenant de l'azote
• C04B 24/16 - Composés contenant du soufre
• C04B 24/38 - Polysaccharides ou leurs dérivés
• C04B 24/42 - Composés comportant au moins une liaison carbone-silicium
• C04B 103/00 - Fonctions ou propriétés de l'ingrédient actif
• C04B 103/50 - Agents anti-mousseAgents d'expulsion d'air
• C04B 103/60 - Agents de protection contre la dégradation chimique, physique ou biologique
• C04B 103/67 - Agents biocides
• C04B 111/70 - Coulis

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate, such as, floors, walls and ceilings. The support plate has a plurality of spaced apart raised portions and recesses in the plate material, and a plurality of openings extending through the top surface and bottom surface of the plate material. The openings exposing a mat layer attached to the bottom of the support plate. Support plates of the invention are used for tile installations between a substrate and tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the openings forming a continuous bond between the mortar, openings and mat layer to provide a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures

Abrégé

The invention is directed to one or more sand free cement-based grout compositions that are highly resistant to wet abrasion removal. The one or more sand free cement-based grout compositions comprising calcium aluminate cement as a main binder in combination with one or more additional binders as well as one or more of the following ingredients: a single anhydrite binder, metakaolin, fine limestone, coarse limestone, an acidic retarder, and/or a lithium-based accelerator. The invention is directed to one or more methods of wet abrasion testing cured and wetted sand free cement-based grout compositions.

Classes IPC  ?

• C04B 28/02 - Compositions pour mortiers, béton ou pierre artificielle, contenant des liants inorganiques ou contenant le produit de réaction d'un liant inorganique et d'un liant organique, p. ex. contenant des ciments de polycarboxylates contenant des ciments hydrauliques autres que ceux de sulfate de calcium
• C04B 22/00 - Emploi de matières inorganiques comme ingrédients actifs pour mortiers, béton ou pierre artificielle, p. ex. emploi d'accélérateurs
• C04B 22/06 - OxydesHydroxydes
• C04B 18/14 - DéchetsRésidus provenant de procédés métallurgiques

Produits et services

PAINTS; PRIMERS; PRIMERS FOR CONCRETE, STONE, TILE, CERAMICS, MASONRY AND OTHER SURFACES AND SUBSTRATES

Abrégé

Portland cement-free geopolymer based compositions for building materials, methods of making, and use thereof. The Portland cement-free geopolymer based compositions at least include a first pozzolanic binder material, preferably slag, in an amount from about 10-35wt.% of the composition, and a second pozzolanic binder material, preferably pulverized fly ash, in an amount greater than 0 wt.% to 30 wt.% of the composition. The compositions further include a first alkali activator in an amount greater than 0 wt.% to 2 wt.%, a second alkali activator in an amount greater than 0 wt.% to 5 wt.%, a filler material comprising medium-fine sand in an amount from 10 wt.% to 60 wt.%; and one or more additional additives, wherein wt.% is based on a total weight of the composition. The first alkali activator may be potassium hydroxide powder, while the second alkali activator may be a sodium-based alkali activator.

Classes IPC  ?

• C04B 28/08 - Ciments de scories
• C04B 14/06 - QuartzSable
• C04B 7/12 - Pouzzolanes naturelsCiments de pouzzolanes naturels
• C08L 31/04 - Homopolymères ou copolymères de l'acétate de vinyle
• C04B 14/04 - Matières riches en siliceSilicates
• C04B 12/00 - Ciments non prévus par les groupes
• C04B 40/00 - Procédés, en général, pour influencer ou modifier les propriétés des compositions pour mortiers, béton ou pierre artificielle, p. ex. leur aptitude à prendre ou à durcir

Produits et services

(1) Waterproofing chemical compositions for articles of masonry, tile, and other building and constructions surfaces, such as swimming pools, interior building surfaces, and exterior building surfaces; Latex and polymer additives for use in mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Adhesive and bonding materials for building purposes, namely, cement mixes for installing tile, brick, stone and concrete (2) Paint primer for concrete, tile, wood, stone and masonry; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy coating for sealing concrete surfaces; penetrating paint sealer coatings for use on concrete; paint sealer coatings for use in sealing, densifying and hardening concrete surfaces, namely, acrylic-based and water-based curing and sealing compounds being paints, primers, and varnish; oil and water repellant paint sealer preparations for the preservation of stone, concrete and masonry; paints, namely, acrylic paints, anti-corrosive paints, ceramic paints, interior and exterior paints, floor paints, oil paints, primer paints, weatherproofing coatings in the form of paints; colorants, Colorants, namely, colorants for concrete, colorants for use in the manufacture of paint; stains, namely, stains for use on floors, wood stains, wood preservatives and stains, leather stains, coating compositions in the nature of interior and exterior stains for architectural applications; pigments, namely, interior and exterior paint pigments; primers, namely, acrylic primers, paint primers; colorants for concrete (3) Pre-formed shower systems and shower products, namely, shower niches in the nature of shower cubicles; Shower pans in the nature of shower bases; Plumbing fittings, namely, shower drains; Under-floor radiant floor heating system comprised of mat; Electric floor heating systems, namely, electric mats (4) Waterproofing membranes used in building construction; Adhesive sealant used on concrete, mortar, brick, and stone for construction purposes; Polyurethane-based fabrics for use in sealing and insulating buildings; Acoustical insulation for buildings; Weatherizing membranes and vapor barriers, namely, laminated vapor barriers, plastic sheeting used in the construction industry as a vapor barrier, roof underlayment for use as a vapor barrier, insulating waterproofing membranes; Caulking compounds; Chemical bonding preparations for industrial purposes, namely, latex polymer admixture bonding agent for concrete, mortar, plaster, tile, brick, stone, marble, and grout for use in building; Latex additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Waterproofing membranes in liquid polymer rubber chemical form for use in the construction, repair, and maintenance of buildings; sealing compounds for concrete, tile, wood, stone and masonry; Waterproofing membranes for roofing, floors and walls; Waterproofing membranes for use as a floor underlayment; Building materials, namely, waterproofing liquid, composites of liquid latex blended or mixed with hydraulic cement and fillers such as wood chips, inert chemicals, for concrete, chipped stone, or marble that are used to forma composite building material for use as floors, walls, ceilings, wainscoting, or insulation or to repair areas therein (5) Epoxy grout; Adhesive and bonding materials for building purposes, namely, mortar, grout, and asphaltbased mastic for installing tile, brick, stone, and concrete ; Plaster for building purposes; Stucco for building purposes; Cement boards for building, namely, cement excelsior boards, fiber cement boards, wood-fiber reinforced cement boards; Cement and sand mixtures for building purposes; Flooring underlayments (6) Under-floor radiant floor heating system comprised of electric floor heating coils, floor heating thermostat, and an electric wire fault indicator sold together as a unit; Electric floor heating systems, namely, cables, electric mats, and electric heat detection sensors sold as a unit (7) Shower benches and seats for permanent installation into shower enclosures (1) Providing information and advice regarding use and protection of concrete and cementitious materials relating to building construction.

Produits et services

Chemical bonding preparations for industrial purposes, namely, latex polymer admixture bonding agent for concrete, mortar, plaster, tile, brick, stone, marble, and grout for use in building; waterproofing chemical compositions for articles of masonry, tile, and other building and constructions surfaces, such as swimming pools, interior building surfaces, and exterior building surfaces; polymeric additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; latex additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; waterproofing membranes in liquid polymer rubber chemical form for use in the construction, repair, and maintenance of buildings. Primer and sealing agents [paints] for concrete, tile, wood, stone and masonry; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy for sealing concrete surfaces; penetrating sealer coatings [paints] for use on concrete; sealer coatings [paints] for use in sealing, densifying and hardening concrete surfaces, including acrylic- and water-based curing and sealing compounds; oil and water repellant and sealer preparations [paints] for stone, concrete and masonry; paints; colorants; stains; pigments; primers; colorants for concrete. Pre-formed shower systems and shower products, namely, shower niches in the nature of shower cubicles and pre-formed shower benches and seats of shower cubicles; shower pans in the nature of shower bases; plumbing fittings, namely, shower drains; under-floor radiant floor heating system comprised of electric floor heating coils, mat, floor heating thermostat, and an electric wire fault indicator sold together as a unit; electric floor heating systems, namely, cables, electric mats, and sensors sold as a unit. Waterproofing membranes used in building construction; adhesive sealant used on concrete, mortar, brick, and stone for construction purposes; polyurethane-based fabrics for use in sealing and insulating buildings; acoustical insulation for buildings; weatherizing membranes and vapor barriers; caulking compounds. Epoxy grout; adhesive and bonding materials for building purposes, namely, mortar, grout, mastic, and cement for installing tile, brick, stone, and other surface coverings; plaster for building purposes; stucco for building purposes; cement boards for building; cement and sand mixtures for building purposes; flooring underlayments; waterproofing membranes for roofing, floors and walls; waterproofing membranes for use as a floor underlayment; building materials, namely, waterproofing liquid, composites of liquid latex blended or mixed with hydraulic cement and fillers such as wood chips, inert chemicals, chipped stone, or marble that are used to form a composite building material for use as floors, walls, ceilings, wainscoting, or insulation or to repair areas therein. Providing information and advice regarding use and protection of concrete and cementitious materials relating to building construction.

Produits et services

Chemical bonding preparations for industrial purposes, namely, latex polymer admixture bonding agent for concrete, mortar, plaster, tile, brick, stone, marble, and grout for use in building; Waterproofing chemical compositions for articles of masonry, tile, and other building and constructions surfaces, such as swimming pools, interior building surfaces, and exterior building surfaces; Polymeric additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Latex additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Waterproofing membranes in liquid polymer rubber chemical form for use in the construction, repair, and maintenance of buildings; Building materials, namely, waterproofing membrane in liquid chemical form comprised of composites of liquid latex blended or mixed with hydraulic cement and fillers such as wood chips, inert chemicals, chipped stone, or marble for use in construction, namely, for floors, walls, ceilings, and wainscoting, or insulation or to repair areas therein. Primer and sealing agents for concrete, tile, wood, stone and masonry; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy for sealing concrete surfaces; penetrating sealer coatings for use on concrete; sealer coatings comprised of acrylic- and water-based curing and sealing compounds for use in sealing, densifying and hardening concrete surfaces; oil and water repellant and sealer preparations for stone, concrete and masonry; paints; colorants; Coatings in the nature of stains; pigments; primers; colorants for concrete Pre-formed shower systems and shower products, namely, shower niches in the nature of shower cubicles; Shower pans in the nature of shower bases; Plumbing fittings, namely, shower drains; Shower benches and seats for permanent installation into shower enclosures; Under-floor radiant floor heating system comprised of electric floor heating coils, mat, floor heating thermostat, and an electric wire fault indicator sold together as a unit; Electric floor heating systems, namely, cables, electric mats, and sensors sold as a unit. Waterproofing membranes used in building construction; Adhesive sealant used on concrete, mortar, brick, and stone for construction purposes; Polyurethane-based fabrics for use in sealing and insulating buildings; Acoustical insulation for buildings; Weatherizing membranes and vapor barriers; Caulking compounds. Epoxy grout; Adhesive and bonding materials for building purposes, namely, mortar, grout, mastic, and cement for installing tile, brick, stone, and other surface coverings; Plaster for building purposes; Stucco tiles for building purposes; Cement boards for building; Cement and sand mixtures for building purposes; Flooring underlayments; Waterproofing membranes for roofing, floors and walls; Waterproofing membranes for use as a floor underlayment. Providing information and advice regarding use and protection of concrete and cementitious materials relating to building construction.

Abrégé

Portland cement-free binder formulations, methods of making, and use of such cement-free binder formulations in building materials. The Portland cement-free binder formulations of the invention at least include a geopolymer material, preferably slag, present in an amount from about 90-98 wt. % of the binder formulation, an activator agent in an amount greater than 0 wt. % to less than 10 wt. %, and a slag accelerating agent in an amount from greater than 0 wt. % to less than 10 wt. % of the binder formulation. The activator agent may be hydrated lime, while the slag accelerating agent may be calcium dihydroxide and a calcium salt. The binder formulations of the invention may be premixed hydrated lime activated geopolymer-based binders for addition with the one or more additional compounds to render a building material composition.

Classes IPC  ?

• C04B 28/04 - Ciments Portland
• C04B 7/02 - Ciment Portland
• C04B 28/02 - Compositions pour mortiers, béton ou pierre artificielle, contenant des liants inorganiques ou contenant le produit de réaction d'un liant inorganique et d'un liant organique, p. ex. contenant des ciments de polycarboxylates contenant des ciments hydrauliques autres que ceux de sulfate de calcium
• C04B 28/14 - Compositions pour mortiers, béton ou pierre artificielle, contenant des liants inorganiques ou contenant le produit de réaction d'un liant inorganique et d'un liant organique, p. ex. contenant des ciments de polycarboxylates contenant des ciments de sulfate de calcium

Abrégé

Two-component epoxy-based liquid formulations and their resultant dual use epoxy-based products. The epoxy-based liquid formulations include a liquid epoxy resin composition mixed with a liquid epoxy curing agent composition. The liquid epoxy resin compositions include one or more liquid epoxy resins containing a reactive oxirane structure or epoxide group, while the liquid epoxy curing agent composition comprises one or more epoxy curing agents. The liquid epoxy resin and liquid epoxy curing agent compositions are mixed together to provide a dual functioning epoxy-based formulation that, when applied to a substrate and cured, provides a cured three-dimensional cross-linked thermoset dual acting epoxy-based product having both the moisture vapor barrier and the primer functionalities.

Classes IPC  ?

• C08L 63/00 - Compositions contenant des résines époxyCompositions contenant des dérivés des résines époxy
• C08G 59/50 - Amines
• C09D 163/00 - Compositions de revêtement à base de résines époxyCompositions de revêtement à base de dérivés des résines époxy

Abrégé

Modular floor drain systems that include symmetric substrate segments each having outwardly extending flanges for overlapping an adjacent edge of the other substrate segment. The system also includes a drain segment connected to the two or more symmetric substrate segments via at least one of the outwardly extending flanges. The symmetric substrate segments have identical configurations enabling interchangeable use thereof and complementary mating for ease of installation of the modular floor drain system. The substrate segments may have hinges for bending the symmetric substrate segment to allow for folding thereof.

Classes IPC  ?

• A47K 3/40 - Cuvettes ou bacs
• E03F 5/04 - Bouches d'égout avec ou sans obturateur d'odeurs ou chambre à sédiments

Abrégé

Modular floor drain systems that include symmetric substrate segments each having outwardly extending flanges for overlapping an adjacent edge of the other substrate segment. The system also includes a drain segment connected to the two or more symmetric substrate segments via at least one of the outwardly extending flanges. The symmetric substrate segments have identical configurations enabling interchangeable use thereof and complementary mating for ease of installation of the modular floor drain system. The substrate segments may have hinges for bending the symmetric substrate segment to allow for folding thereof.

Classes IPC  ?

• A47K 3/40 - Cuvettes ou bacs
• E03C 1/22 - Dispositifs de vidange placés sur lavabos, baignoires ou éviers
• E03F 5/04 - Bouches d'égout avec ou sans obturateur d'odeurs ou chambre à sédiments

Produits et services

(1) Adhesion promoter designed to enhance the adhesion of mortars to stone, tile, ceramics, marble, masonry, glass, concrete, cement-based surfaces, polyurethane, vinyl, plastic laminates, epoxy, fiberglass and wood; adhesion promoter designed to improve bonding of self-leveling underlayments to stone, tile, ceramics, marble, masonry, glass, concrete, cement-based surfaces, polyurethane, vinyl, plastic laminates, epoxy, fiberglass and wood.

Abrégé

Apparatus, systems and methods that add pigment/colorant to a two-part reactive resin coating formulation without deleteriously affecting the stoichiometric ratio of resin-to-hardener in the two-part reactive resin coating formulation (2K coating). Two-component apparatus and systems are provided that include a first compartment having a pigmented resinous composition and a second compartment having a hardener composition. The pigmented resinous and hardener compositions are discharged from the two-component apparatus/systems in a mixed or unmixed state to render a dual pigmented resin-hardener composition having a stoichiometric ratio of resin-to-hardener substantially the same as that of the 2K coating, such that when mixed therewith, the dual pigmented resin-hardener composition avoids altering the stoichiometric ratio of resin-to-hardener of the 2K coating.

Classes IPC  ?

• C09D 7/80 - Procédés pour l'incorporation d'ingrédients
• B01F 33/84 - Installations de mélange avec des récipients de mélange recevant des matières distribuées par plusieurs récipients de composants, p. ex. des pots de peinture
• C09D 163/00 - Compositions de revêtement à base de résines époxyCompositions de revêtement à base de dérivés des résines époxy

Produits et services

Thermostats

Abrégé

Methods and high visible-light reflective reactive resinous coatings that increase visible light inside a grow house and enhance plant growth therein. A pre-dispersion of a resin, zinc oxide, one or more fillers, and retroreflective microspheres, is mixed with a one-part or two-part reactive coating system to provide a high-reflectance reactive resin coating composition. At least one or more layers of the high-reflectance reactive resin coating composition is coated onto a substrate inside the grow house and allowed to cure. The cured high-reflectance reactive resin layer has a light reflectance increase up to 60% in lumens increasing an amount of visible light inside the grow house to enhance plant growth.

Classes IPC  ?

• C09D 5/00 - Compositions de revêtement, p. ex. peintures, vernis ou vernis-laques, caractérisées par leur nature physique ou par les effets produitsApprêts en pâte
• A01G 7/04 - Traitement électrique ou magnétique des végétaux pour favoriser leur croissance
• A01G 9/14 - Serres
• A01G 9/24 - Dispositifs de chauffage, d'aération, de régulation de la température ou d'irrigation dans les serres, les châssis ou les installations similaires
• C09D 5/33 - Peintures réfléchissantes
• C09D 7/40 - Adjuvants
• C09D 7/45 - Agents de suspension
• C09D 7/61 - Adjuvants non macromoléculaires inorganiques
• C09D 7/80 - Procédés pour l'incorporation d'ingrédients
• C09D 163/00 - Compositions de revêtement à base de résines époxyCompositions de revêtement à base de dérivés des résines époxy
• C09D 177/04 - Polyamides dérivés d'acides alpha-aminocarboxyliques

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants

Produits et services

Chemical preparations for industrial purposes; additives in chemical form for the manufacture or processing of mortars, concrete and other cementitious mixes; adhesives, namely, epoxy adhesives for concrete; chemical compounds for curing concrete, namely, acrylic-, water-, resin- and wax-based curing compounds for concrete; cement-waterproofing chemicals, except paints; hardeners for finished concrete surfaces, namely, chemical additives for accelerating hardening of concrete; aggregates, namely, aluminum oxide; chemical mold release agents for concrete forms; mold release preparations colorants for concrete; primers; concrete sealers in the form of coating; penetrating sealer coatings for use on concrete; sealer coatings for use in sealing, densifying and hardening concrete surfaces, namely, acrylic- and water-based curing and sealing compounds for use in sealing, densifying, and hardening concrete surfaces, all sold as a unit; coating preparations having oil and water repellant properties used as paints for stone, concrete and masonry; sealer preparations for stone, concrete, and masonry in the form of a coating; water-based coating for reducing evaporation of fresh concrete; concrete dyes; hardeners for finished concrete surfaces, namely, industrial sealants for surface hardening of concrete; floor toppings in the nature of floor coatings Cleaning, polishing, and scouring preparations; degreasing preparations other than for use in manufacturing processes, for machinery, floors, walls and other surfaces; concrete cleaning preparations Non-metallic building materials, namely, mortars for building, grouts, cements and cementitious materials used for construction; floor underlayments; adhesive and bonding building materials, namely, mortar, grout mastic and cement, for installing tile, brick, stone, and masonry; reinforced cements; floor underlayments, namely, self-leveling floor underlayments; cementitious controlled expansion grouts; patching cements and mortars for concrete; cementitious floor toppings; cementitious floor toppings containing wear aggregates, namely, aluminum oxide; aggregates for concrete, namely, aluminum oxide, silica and trap rock; cement aggregates, namely, silica and trap rock Providing information and advice regarding use and protection of concrete and cementitious materials relating to building construction

Abrégé

Dispersion-based ready-to-use grout formulations, methods of making such dispersion-based ready-to-use grout formulations, and the resultant grout products that perform as reactive resin grout products. The grout formulations of the invention at least include a water-based acrylic polymer dispersion binder and a water-based acrylate copolymer dispersion binder, in combination with one or more of an alkaline cross-linker, one or more silane adhesion promoters and/or a micro-fiber filler, along with various other constituents, to provide one-part ready-to-use grout formulations that require no mixing prior to use thereof. The resultant grout products of the invention meet performance standards of epoxy grout products, without requiring mixing of composition parts and without any adverse side effects.

Classes IPC  ?

• C04B 26/06 - Acrylates
• C04B 14/06 - QuartzSable
• C04B 14/28 - Carbonates de calcium
• C04B 14/30 - Oxydes autres que la silice
• C04B 14/42 - Verre
• C04B 18/14 - DéchetsRésidus provenant de procédés métallurgiques
• C04B 24/02 - AlcoolsPhénolsÉthers
• C04B 24/12 - Composés contenant de l'azote
• C04B 24/16 - Composés contenant du soufre
• C04B 24/38 - Polysaccharides ou leurs dérivés
• C04B 24/42 - Composés comportant au moins une liaison carbone-silicium
• C04B 103/00 - Fonctions ou propriétés de l'ingrédient actif
• C04B 103/50 - Agents anti-mousseAgents d'expulsion d'air
• C04B 103/60 - Agents de protection contre la dégradation chimique, physique ou biologique
• C04B 103/67 - Agents biocides
• C04B 111/70 - Coulis

Abrégé

Two-component epoxy-based liquid formulations and their resultant dual use epoxy-based products. The epoxy-based liquid formulations include a liquid epoxy resin composition mixed with a liquid epoxy curing agent composition. The liquid epoxy resin compositions include one or more liquid epoxy resins containing a reactive oxirane structure or epoxide group, while the liquid epoxy curing agent composition comprises one or more epoxy curing agents. The liquid epoxy resin and liquid epoxy curing agent compositions are mixed together to provide a dual functioning epoxy-based formulation that, when applied to a substrate and cured, provides a cured three-dimensional cross-linked thermoset dual acting epoxy-based product having both the moisture vapor barrier and the primer functionalities.

Classes IPC  ?

• C08L 63/00 - Compositions contenant des résines époxyCompositions contenant des dérivés des résines époxy
• C08G 59/50 - Amines
• C09D 163/00 - Compositions de revêtement à base de résines époxyCompositions de revêtement à base de dérivés des résines époxy
• C08K 5/17 - AminesComposés d'ammonium quaternaire
• C08K 3/013 - Charges, pigments ou agents de renforcement
• C08K 5/00 - Emploi d'ingrédients organiques

Abrégé

Electronic trowels, systems and methods of applying a layer of material using the present electronic trowels. The various electronic trowels include a handle, at least one blade, and one or more sensors residing on or within the trowel. The trowel is for applying a layer of material over a surface area, whereby the one or more sensors detect and collect material installation data during application of the layer of material over the surface area. One or more electronic devices coupled to the one or more sensors receive and analyze the collected installation data for monitoring and controlling the application of the layer of material to ensure a desired end product is achieved. Application errors may be detected before, during, or after the installation process.

Classes IPC  ?

• E04F 21/24 - Outillage pour travaux de finition des bâtiments pour la pose des revêtements de sols faits de produits préparés sur place, p. ex. outils à lisser
• G01N 33/38 - BétonChauxMortierPlâtreBriquesProduits céramiquesVerre
• G01B 21/30 - Dispositions pour la mesure ou leurs détails, où la technique de mesure n'est pas couverte par les autres groupes de la présente sous-classe, est non spécifiée ou est non significative pour mesurer la rugosité ou l'irrégularité des surfaces

Abrégé

Thermally conductive cementitious compositions for use in flooring installations that are applied over a heat radiating flooring system to increase the thermal conductance of the flooring system and increase the rate of heating the flooring system. The thermally conductive cementitious compositions include a cementitious composition, amorphous flake graphite carbon, and an aqueous solution suitable for use as a thermally conductive mortar, grout or adhesive for flooring installations. The thermally conductive cementitious compositions also include a cementitious composition, mesh fine aluminum oxide, mesh coarse aluminum oxide, and an aqueous solution that provides a thermally conductive mortar, grout or adhesive for use in flooring installations.

Classes IPC  ?

• C09K 5/14 - Substances solides, p. ex. pulvérulentes ou granuleuses
• C04B 22/02 - Éléments
• C04B 24/26 - Composés macromoléculaires obtenus par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone
• C04B 24/38 - Polysaccharides ou leurs dérivés
• C04B 14/06 - QuartzSable
• C04B 14/28 - Carbonates de calcium
• C04B 26/02 - Composés macromoléculaires
• C04B 28/04 - Ciments Portland
• C04B 14/38 - Matières fibreuses"Whiskers"
• C04B 103/32 - Superplastifiants
• C04B 111/00 - Fonction, propriétés ou utilisation des mortiers, du béton ou de la pierre artificielle
• C04B 111/62 - Compositions autolissantes
• C04B 111/70 - Coulis

Produits et services

Grout.

Abrégé

Formulations and coatings that seal and protect sensitive natural porous stone, such as, calcareous stone from acid etching. The formulations include one-part and two-part formulations for coating calcareous stones in interior and exterior environments. Various formulations of the invention may include an acrylic hybrid polymer dispersion, a polyurethane dispersion binder, and water. The polyurethane dispersion binder may include one or more acrylic urethane hybrid polymer dispersions or acrylic dispersions or acrylic hybrid polymer dispersions. The acrylic hybrid polymer dispersion may be an epoxy-acrylic hybrid polymer dispersion. The two-part formulations may further include a first hydroxyl function acrylic binder dispersion and a second epoxy functional silane hardener that are mixed together to form the coatings of the invention.

Classes IPC  ?

• C08L 75/16 - Polyuréthanes comportant des liaisons non saturées carbone-carbone comportant des liaisons non saturées carbone-carbone terminales
• C08K 5/541 - Composés contenant du silicium contenant de l'oxygène
• C08K 5/5435 - Composés contenant du silicium contenant de l'oxygène contenant de l'oxygène dans un cycle
• C08L 33/14 - Homopolymères ou copolymères des esters d'esters contenant des atomes d'halogène, d'azote, de soufre ou d'oxygène en plus de l'oxygène du radical carboxyle
• C08L 63/00 - Compositions contenant des résines époxyCompositions contenant des dérivés des résines époxy
• C08L 91/06 - Cires
• C09D 133/14 - Homopolymères ou copolymères d'esters d'esters contenant des atomes d'halogène, d'azote, de soufre ou d'oxygène en plus de l'oxygène du radical carboxyle
• C09D 163/00 - Compositions de revêtement à base de résines époxyCompositions de revêtement à base de dérivés des résines époxy
• C09D 175/16 - Polyuréthanes comportant des liaisons non saturées carbone-carbone comportant des liaisons non saturées carbone-carbone terminales
• C09D 191/06 - Cires

Produits et services

Plastic mats and underlayment for installing tile over wall, ceiling and flooring substrates used in permanent construction.

Produits et services

Primer and sealing agents for concrete, tile, wood and stone; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy for sealing concrete surfaces Cementitious materials, namely, cementitious materials used for construction; floor underlayments; cement-based flooring concentrate; hydraulic cement that is applied to concrete surfaces; self-leveling concrete cement; hydraulic cement for capping concrete surfaces; self-leveling concrete cement; self-leveling concrete capping cement; self-leveling concrete overlayments and flooring underlayments; two-part epoxy underlayment for floor surfaces; acrylic polymer bonding agent and primer for concrete, tile, wood and stone Concrete pouring and capping for buildings and floors; concrete leveling services; application of concrete coatings for beautification purposes; concrete pumping services; providing information and advice regarding construction of concrete surfaces and slabs Mobile concrete delivery, namely, transport and delivery of concrete; ready-mix cement delivery service, namely, transport and delivery of ready-mix cement

Produits et services

Primer and sealing agents for concrete, tile, wood and stone; acrylic polymer primer for concrete, tile, wood and stone; two-part epoxy for sealing concrete surfaces Cementitious materials, namely, cementitious materials used for construction; floor underlayments; cement-based flooring concentrate; hydraulic cement that is applied to concrete surfaces; self-leveling concrete cement; hydraulic cement for capping concrete surfaces; self-leveling concrete cement; self-leveling concrete capping cement; self-leveling concrete overlayments and flooring underlayments; two-part epoxy underlayment for floor surfaces Concrete pouring and capping for buildings and floors; concrete leveling services; application of concrete coatings for beautification purposes; concrete pumping services; providing information and advice regarding construction of concrete surfaces and slabs Mobile concrete delivery, namely, transport and delivery of concrete; ready-mix cement delivery service, namely, transport and delivery of ready-mix cement

Abrégé

Electronic trowels, systems and methods of applying a layer of material using the present electronic trowels. The various electronic trowels include a handle, at least one blade, and one or more sensors residing on or within the trowel. The trowel is for applying a layer of material over a surface area, whereby the one or more sensors detect and collect material installation data during application of the layer of material over the surface area. One or more electronic devices coupled to the one or more sensors receive and analyze the collected installation data for monitoring and controlling the application of the layer of material to ensure a desired end product is achieved. Application errors may be detected before, during, or after the installation process.

Classes IPC  ?

• E04F 21/24 - Outillage pour travaux de finition des bâtiments pour la pose des revêtements de sols faits de produits préparés sur place, p. ex. outils à lisser
• G01N 33/38 - BétonChauxMortierPlâtreBriquesProduits céramiquesVerre
• G01B 21/30 - Dispositions pour la mesure ou leurs détails, où la technique de mesure n'est pas couverte par les autres groupes de la présente sous-classe, est non spécifiée ou est non significative pour mesurer la rugosité ou l'irrégularité des surfaces

Abrégé

Methods of forming composite block briquettes of prefabricated thinsets, grouts, and self-leveling underlayment products having high sand content, and the resultant composite block briquettes. Processing conditions within a compacting tool are controlled to generate a press force that is applied to a prefabricated cementitious product having a high sand content, whereby the press force enables formation of sustainable prefabricated product briquettes having a high sand content. The controlled compacting processing conditions and parameters of the invention generate usable briquettes that break up and form the intended resultant product of the starting prefabricated cementitious product.

Classes IPC  ?

• B28B 3/12 - Fabrication d'objets façonnés en utilisant des pressesPresses spécialement adaptées à ce travail dans laquelle un ou plusieurs cylindres exercent une pression sur le matériau
• B28C 7/02 - Commande de l'opération de mélange
• C04B 40/00 - Procédés, en général, pour influencer ou modifier les propriétés des compositions pour mortiers, béton ou pierre artificielle, p. ex. leur aptitude à prendre ou à durcir
• C04B 14/06 - QuartzSable
• C04B 18/08 - Cendres volantes
• C04B 24/26 - Composés macromoléculaires obtenus par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone
• C04B 28/02 - Compositions pour mortiers, béton ou pierre artificielle, contenant des liants inorganiques ou contenant le produit de réaction d'un liant inorganique et d'un liant organique, p. ex. contenant des ciments de polycarboxylates contenant des ciments hydrauliques autres que ceux de sulfate de calcium

Abrégé

Dispersion-based ready-to-use grout formulations, methods of making such dispersion-based ready-to-use grout formulations, and the resultant grout products that perform as reactive resin grout products. The grout formulations of the invention at least include a water-based acrylic polymer dispersion binder and a water-based acrylate copolymer dispersion binder, in combination with one or more of an alkaline cross-linker, one or more silane adhesion promoters and/or a micro-fiber filler, along with various other constituents, to provide one- part ready-to-use grout formulations that require no mixing prior to use thereof. The resultant grout products of the invention meet performance standards of epoxy grout products, without requiring mixing of composition parts and without any adverse side effects.

Classes IPC  ?

• C04B 7/00 - Ciments hydrauliques
• C04B 14/06 - QuartzSable
• C04B 14/04 - Matières riches en siliceSilicates

Produits et services

(1) Epoxy flooring kits

Produits et services

Epoxy flooring kits, namely, kits comprised of epoxy coatings for use on concrete floors; Epoxy flooring kits, namely, kits comprised of textured additives in the nature of decorative chips for floor coatings; Epoxy flooring kits, namely, kits comprised of concrete sealers in the form of a coating for use on floors

Produits et services

Building materials (non-metallic); non-metallic rigid pipes for building; asphalt, pitch and bitumen; non-metallic transportable buildings; monuments, not of metal; epoxy-based grout; adhesive and bonding building materials; mortar, grout, mastic and cement, for installing tile, brick, stone, and other surface coverings; plaster for building purposes; cement boards for building; cement and sand mixtures for building purposes; floor underlayments, including self-leveling underlayments; flooring underlayments, namely, plastic mats and fabric membranes for support and underlayment for installing tile over wall, ceiling and flooring substrates; building materials, namely, composites or mixtures of hydraulic cement and fillers or aggregates; building materials, namely, composites or mixtures of hydraulic cement and fillers such as wood chips, inert chemical, chipped stone or marble used with liquid latex compositions used to form floors, walls, ceilings, wainscotting insulation or repair areas therein; reinforced cements and cementitious materials; flooring materials; resurfacing materials for concrete; grouts; cementitious controlled expansion grout; crack and joint fillers for concrete; mortar; patching mortars for concrete; cement-based patching system; cement-based capping and topping for concrete surfaces; self-leveling concrete overlayment; floor toppings, including toppings containing wear aggregates; aggregates for concrete; cement and aggregate compositions in Class 19.

Produits et services

(1) Rigid pipes, not of metal, for building; asphalt, pitch and bitumen; buildings, transportable, not of metal; Epoxy-based grout; adhesive and bonding building materials, namely mortar, grout, asphalt based roofing mastic, and cement for installing tile, brick, stone; plaster for building purposes; cement and sand mixtures for building purposes; floor underlayments, including self-leveling underlayments; flooring underlayments, namely, plastic mats and fabric membranes for support and underlayment for installing tile over wall, ceiling and flooring substrates; building materials, namely, composites or mixtures of hydraulic cement; building materials, namely, composites or mixtures of hydraulic cement and fillers such as wood chips, chipped stone or marble used with liquid latex compositions used to form floors, walls, ceilings, wainscotting insulation or repair areas therein; reinforcing materials, not of metal, for building, namely, reinforced cements; resurfacing materials for concrete; grouts; cementitious controlled expansion grout; mortar; patching mortars for concrete; cement-based patching system; cement-based capping and topping for concrete surfaces; selfleveling concrete overlayment;

Abrégé

Thermally conductive cementitious compositions for use in flooring installations that are applied over a heat radiating flooring system to increase the thermal conductance of the flooring system and increase the rate of heating the flooring system. The thermally conductive cementitious compositions include a cementitious composition, amorphous flake graphite carbon, and an aqueous solution suitable for use as a thermally conductive mortar, grout or adhesive for flooring installations. The thermally conductive cementitious compositions also include a cementitious composition, mesh fine aluminum oxide, mesh coarse aluminum oxide, and an aqueous solution that provides a thermally conductive mortar, grout or adhesive for use in flooring installations.

Classes IPC  ?

• C09K 5/14 - Substances solides, p. ex. pulvérulentes ou granuleuses
• C04B 22/02 - Éléments
• C04B 24/26 - Composés macromoléculaires obtenus par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone
• C04B 24/38 - Polysaccharides ou leurs dérivés
• C04B 14/06 - QuartzSable
• C04B 14/28 - Carbonates de calcium
• C04B 26/02 - Composés macromoléculaires
• C04B 28/04 - Ciments Portland
• C04B 14/38 - Matières fibreuses"Whiskers"
• C04B 103/32 - Superplastifiants
• C04B 111/00 - Fonction, propriétés ou utilisation des mortiers, du béton ou de la pierre artificielle
• C04B 111/62 - Compositions autolissantes
• C04B 111/70 - Coulis

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 15/16 - Revêtements posés à l'état de nappes flexibles, p. ex. parquet disposé sur une nappe flexibleNappes spécialement adaptées au revêtement des sols
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre

Abrégé

Methods, systems and polished overlays utilizing an uncoupling membrane between a substrate (e.g., floor) and a deposited polishable overlay. The overlay may be a self-leveling, polishable overlay. An uncoupling membrane is secured to a substrate followed by directly depositing a polishable overlay over and contacting the uncoupling membrane. The uncoupling membrane secures the polishable overlay to the substrate without use of a primer/broadcast sand layer. The polishable overlay may fill voids in the uncoupling membrane and may be deposited over the uncoupling membrane to a thickness residing above a top surface of the uncoupling membrane. The polishable overlay may be polished once cured whereby the uncoupling membrane reduces stresses in the overlay layer during polishing.

Classes IPC  ?

• E04F 15/12 - Revêtements de sols faits de produits préparés sur place, p. ex. planchers en magnésite d'un seul tenant, mosaïques
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants

Produits et services

(1) Liquid polymer coating agents for application to substrates to form cured protective membranes in construction, repair and maintenance of buildings (2) Primer paints to pre-treat concrete slabs and substrates prior to application of various coatings (3) Adhesive and bonding materials for building purposes, namely, mortar and cement for installing tile, brick, stone, and other coverings for the surfaces of buildings; Cementitious mortars; mixtures of cement and polymer for installing tile, brick, stone, and other coverings for the surfaces of buildings; mixtures of cement and polymer with transmission reducing and substrate protective properties for use in construction, repair and maintenance of buildings; Flooring underlayments; Building materials, namely, composites and mixtures of cement for floor coverings.

Produits et services

PRIMERS TO PRE-TREAT CONCRETE SLABS AND SUBSTRATES PRIOR TO APPLICATION OF VARIOUS COATINGS LIQUID POLYMER FOR APPLICATION TO SUBSTRATES TO FORM CURED PROTECTIVE MEMBRANES IN CONSTRUCTION, REPAIR AND MAINTENANCE OF BUILDINGS POLYMER-MODIFIED COMPOUNDS WITH TRANSMISSION REDUCING AND SUBSTRATE PROTECTIVE PROPERTIES FOR USE IN CONSTRUCTION, REPAIR AND MAINTENANCE OF BUILDINGS

Produits et services

(1) Adhesive and bonding agents including those used for construction, namely, bonding mortar for building purposes and for installing tile, brick, stone, and other surface coverings; cementitious materials including those used for construction and for installing tile, brick, stone, and other surface coverings, namely, cement mixes and mortar; floor underlayments; cement mixtures for building purposes, namely, cement and mortar; cements and cementitious materials, including those used for construction, namely, cement mixes and mortar.

Produits et services

Tile and stone adhesives for use in the construction industry Bonding mortar for installing tile, brick, and stone for use in the construction industry

Abrégé

Methods of formulating, premixed cement-based tiling compositions and application of such premixed cement-based tiling compositions as an adhesive or grout. The premixed cement-based tiling compositions include a premixed cementitious formulation having a pH and an alkali activation constituent. The premixed cementitious formulation includes an aluminous or a calcium aluminate cement slurry in an amount of about 35 wt. % to 50 wt. % in combination with one or more filler or modifier materials present in an amount of about 40 wt. % to 65 wt. %. The alkali activation constituent destabilizes the premixed cementitious formulation by increasing the pH thereof to generate a reaction between the premixed cementitious formulation and the alkali activation constituent resulting in the cement-based tiling composition for use as an adhesive or a grout. The alkali composition may be sodium hydroxide supersaturated with lithium carbonate.

Classes IPC  ?

• C04B 7/32 - Ciments alumineux
• C04B 28/06 - Ciments alumineux
• C04B 103/10 - Accélérateurs
• C04B 111/00 - Fonction, propriétés ou utilisation des mortiers, du béton ou de la pierre artificielle
• C04B 111/70 - Coulis

Produits et services

Grout for tile and stone.

Abrégé

Grouts, grout products and methods of applying such grouts that include a urethane-acrylic hybrid polymer dispersion (UA-HPD) and a filler material. The UA-HPD may be present in an amount of about 10-40% by weight of the composition, while the filler material may be present in an amount of about 60-90% by weight of the composition. Additional filler materials may also be provided within the UA-HPD grout composition to provide the resultant UA-HPD grout with desired characteristics and properties. The UA-HPD containing grouts are applied between spaced-apart tiles and/or masonry to fill voids and/or joints there-between.

Classes IPC  ?

• C04B 14/04 - Matières riches en siliceSilicates
• C04B 14/28 - Carbonates de calcium
• C04B 26/16 - Polyuréthanes
• C04B 26/06 - Acrylates
• C04B 14/06 - QuartzSable
• C04B 14/22 - Verre
• C04B 26/10 - Composés macromoléculaires obtenus autrement que par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone
• C04B 14/42 - Verre
• C04B 111/70 - Coulis

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 13/04 - Enduits de base pour le plâtre
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures

Produits et services

Adhesives and bonding agents for tile and stone.

Produits et services

Primers and paint sealers; sealants in the nature of paints. Sealants; silicate preparations for protection against moisture in masonry. Mortar toppings and coatings for flooring; mortar; water resistant mortar; self-levelling mortar.

Produits et services

PAINTS; PRIMERS; PRIMERS FOR CONCRETE, STONE, TILE, CERAMICS, MASONRY AND OTHER SURFACES AND SUBSTRATES

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 15/16 - Revêtements posés à l'état de nappes flexibles, p. ex. parquet disposé sur une nappe flexibleNappes spécialement adaptées au revêtement des sols
• E04F 15/04 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en bois, p. ex. avec organes de jointement en bois
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/18 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés

Produits et services

Tile adhesive. Cementitious building materials; mortars; grouts; cements; epoxy mortar; epoxy grout.

Abrégé

Grouts, grout products and methods of applying such grouts that include a urethane-acrylic hybrid polymer dispersion (UA-HPD) and a filler material. The UA-HPD may be present in an amount of about 10-40% by weight of the composition, while the filler material may be present in an amount of about 60-90% by weight of the composition. Additional filler materials may also be provided within the UA-HPD grout composition to provide the resultant UA-HPD grout with desired characteristics and properties. The UA-HPD containing grouts are applied between spaced-apart tiles and/or masonry to fill voids and/or joints there-between.

Classes IPC  ?

• C04B 26/06 - Acrylates
• C04B 14/06 - QuartzSable
• C04B 14/22 - Verre
• C04B 14/28 - Carbonates de calcium
• C04B 26/16 - Polyuréthanes
• C04B 14/04 - Matières riches en siliceSilicates
• C04B 26/10 - Composés macromoléculaires obtenus autrement que par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone
• C04B 111/70 - Coulis

Produits et services

epoxy mortar and multi-part epoxy mortar that are environmentally friendly

Abrégé

Grouts, grout products and methods of applying such grouts that include a urethane-acrylic hybrid polymer dispersion (UA-HPD) and a filler material. The UA-HPD may be present in an amount of about 10-40% by weight of the composition, while the filler material may be present in an amount of about 60-90% by weight of the composition. Additional filler materials may also be provided within the UA-HPD grout composition to provide the resultant UA-HPD grout with desired characteristics and properties. The UA-HPD containing grouts are applied between spaced-apart tiles and/or masonry to fill voids and/or joints there-between.

Classes IPC  ?

• C04B 14/00 - Emploi de matières inorganiques comme charges, p. ex. de pigments, pour mortiers, béton ou pierre artificielleTraitement de matières inorganiques spécialement prévu pour renforcer leurs propriétés de charge, dans les mortiers, béton ou pierre artificielle
• C04B 16/04 - Composés macromoléculaires
• C04B 26/10 - Composés macromoléculaires obtenus autrement que par des réactions faisant intervenir uniquement des liaisons non saturées carbone-carbone
• C04B 14/06 - QuartzSable
• C04B 14/04 - Matières riches en siliceSilicates
• C04B 14/22 - Verre
• C04B 14/28 - Carbonates de calcium

Produits et services

(1) Non-metallic building materials, namely, grout; floor underlayments; adhesive and bonding building materials for installing tile, brick, stone, and other surface coverings, namely, grout; cementitious controlled expansion grout.

Produits et services

(1) Concrete sealers in the form of coating, namely, paint for concrete floors; penetrating sealer coatings for use on concrete namely, silane-siloxane coating for use on concrete floors; sealer coating for use in sealing and hardening concrete surfaces, consisting of acrylic and water based curing and sealing compounds.

Produits et services

(1) Additives in chemical form for the manufacture and processing of mortars, concrete and other cementitius mixes; adhesives, namely, epoxy and acrylic-based adhesives for concrete; chemical compounds for curing concrete, namely, acrylic-, water-, resin- and wax-based curing compounds; chemical binders for concrete; substance to harden limestone and concrete; cement waterproofing chemicals, except paints; chemicals for the conservation and preservation of concrete surfaces; hardeners for concrete and lime substances; surface hardener for concrete and mortar; bonding agents, namely, water-based bonding agents for concrete; water-based coatings for reducing evaporation of fresh concrete; chemical mold release agent for concrete forms; chemical coatings, namely concrete sealers; sealer coatings for use in sealing and hardening concrete surfaces, namely acrylic- and water-based curing and sealing compounds. (2) Industrial concrete paint; preservatives against rust and against deterioration of wood; grout colorants;polyaspartic sealers and coatings for floors; oil and water repellants and sealers for stone, concrete and masonry; epoxy-based primers, for concrete surfaces; water-based primers for terrazzo, marble, metal decking, ceramic and quarry tile, and epoxy flooring; concrete dyes. (3) Cleaning, polishing, scouring and abrasive preparation for cement and cement-based flooring; cleaners for cement, tile, stone, brick and masonry; degreasing preparations for floors; wax stripping preparations; concrete cleaning preparations. (4) Non-metallic building materials namely, mortars and grouts used for construction; adhesive and bonding building materials namely, mortar, grout mastic and cement, for installing tile, brick, stone, and masonry; floor underlayments; epoxy grout; adhesive and bonding building materials, namely, mortar, grout mastic and cement, for installing tile, brick, stone, masonry; cement mixtures for building purposes; building materials, namely, composite mixtures of hydraulic cement and fillers with cement aggregate; concrete used as a resurfacing material; flooring underlayment, namely, self-leveling underlayment; grouts; cementitius controlled expansion grout; epoxy-based grouts; mortar; patching mortars for concrete; cement-based patching system, namely, patching cements and mortars for concrete; cement-based capping and topping for concrete surfaces; self-leveling concrete overlayment; concrete floor toppings, namely, toppings containing wear aggregates, namely, aluminum oxide; aggregates for concrete, namely, aluminum oxide, silica and trap rock; crack and joint fillers for concrete, namely polymeric resin and polymeric hardener.

Produits et services

(1) Adhesive and bonding agents used for construction, namely, bonding mortar for building purposes and for installing tile, brick, stone, and other surface coverings; cementitious materials for installing tile, brick, stone, and other surface coverings, namely, cement and mortar; floor underlayments; cement mixtures for building purposes, namely, cement and mortar; cements and cementitious materials used for construction, namely, cement and mortar.

Produits et services

Adhesive and bonding agents including those used for construction, namely, bonding mortar of building purposes and for installing tile, brick, stone, and other surface coverings; cementitious materials including those used for construction and for installing tile, brick, stone, and other surface coverings, namely, cement and mortar; floor underlayments; cement mixtures for building purposes, namely, cement and mortar; cements and cementitious materials, including those used for construction, namely, cement and mortar

Produits et services

Non-metallic building materials, namely, grout; floor underlayments; adhesive and bonding building materials for installing tile, brick, stone, and other surface coverings, namely, grout; cementitious controlled expansion grout

Produits et services

(1) Paints, varnishes, lacquers; primers, sealers and coatings; concrete sealers in the form of coating; penetrating sealer coatings for use on concrete; sealer coatings for use in sealing and hardening concrete surfaces, including acrylic and water-based curing and sealing compounds; coatings in the nature of a concrete densifier, sealer and chemical hardener.

Produits et services

(1) Chemical bonding preparations for industrial purposes, namely, latex polymer admixture bonding agent for concrete, mortar, plaster, tile, brick, stone, marble, and grout for use in building; Waterproofing chemical compositions for articles of masonry, tile, and other building and constructions surfaces, such as swimming pools, interior building surfaces, and exterior building surfaces; Polymeric additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Latex additives in chemical form for the manufacture or processing of mortars, grouts, plasters, stuccos, concrete, and other cementitious mixes; Waterproofing membranes in liquid polymer rubber chemical form for use in the construction, repair, and maintenance of buildings (2) Waterproofing membranes used in building construction; Adhesive sealant used on concrete, mortar, brick, and stone for construction purposes; Polyurethane-based fabrics for use in sealing and insulating buildings; Acoustical insulation for buildings; Weatherizing membranes and vapor barriers; Caulking compounds (3) Epoxy grout; Adhesive and bonding materials for building purposes, namely, mortar, grout, mastic, and cement for installing tile, brick, stone, and other surface coverings; Plaster for building purposes; Cement boards for building; Cement and sand mixtures for building purposes; Flooring underlayments; Building materials, namely, composites of liquid latex blended or mixed with hydraulic cement and fillers such as wood chips, inert chemicals, chipped stone, or marble that are used to form floors, walls, ceilings, wainscoting, or insulation or to repair areas therein.

Produits et services

(1) Paints, varnishes, lacquers; primers, sealers and coatings; concrete sealers in the form of coating; penetrating sealer coatings for use on concrete; sealer coatings for use in sealing and hardening concrete surfaces, including acrylic and water-based curing and sealing compounds; coatings in the nature of a concrete densifier, sealer and chemical hardener

Produits et services

(1) Chemical mold release agent for concrete forms; mold release preparations.

Produits et services

Chemical preparations for industrial purposes; additives in chemical form for the manufacture or processing of mortars, concrete and other cementitious mixes; adhesives, including epoxy and acrylic-based adhesives for concrete; chemical compounds for curing concrete, including acrylic-, water-, resin- and wax-based curing compounds; cement-waterproofing chemicals, except paints; hardeners for finished concrete surfaces; aggregates, namely, aluminum oxide, silica and trap rock; chemical mold release agents for concrete forms; mold release preparations Paints; colorants; primers; concrete sealers in the form of coating; penetrating sealer coatings for use on concrete; sealer coatings for use in sealing, densifying and hardening concrete surfaces, including acrylic- and water-based curing and sealing compounds, all sold as a unit; oil and water repellant and sealer preparations for stone, concrete and masonry; water-based coating for reducing evaporation of fresh concrete; concrete dyes Cleaning, polishing, and scouring preparations; degreasing preparations for machinery, floors, walls and other surfaces; wax stripping preparations; concrete cleaning preparations Non-metallic building materials, namely, mortars, grouts, mastics, cements and cementitious materials, including those used for construction; floor underlayments; epoxy grout; adhesive and bonding building materials, namely, mortar, grout mastic and cement, for installing tile, brick, stone, and masonry; reinforced cements; floor underlayments, including self-leveling underlayments; cementitious controlled expansion grouts; epoxy-based grouts; two-component crack and joint fillers for concrete, sold as a unit, patching cements and mortars for concrete; floor toppings, including toppings containing wear aggregates, namely, aluminum oxide; aggregates for concrete, namely, aluminum oxide, silica and trap rock

Produits et services

Concrete sealers in the form of coating; penetrating sealer coatings for use on concrete; sealer coatings for use in sealing and hardening concrete surfaces, including acrylic- and water-based curing and sealing compounds; Coatings in the nature of a concrete sealer

Produits et services

(1) Water-based primer paint designed to be applied to floors prior to the installation of self-levelling underlayment; epoxy coatings for use on concrete, wood and tilefloors; two-part epoxy for sealing concrete; general purpose coatings for use as a moisture and vapor barrier under flooring; two-part epoxy coating for vapor-and waterproofing floors; epoxy coating for application to concrete floors to control moisture vapor emission. (2) General purpose grout sealers for protecting cement, stone, tile, ceramics and masonry exterior and interior surfaces. (3) Vapor-and waterproofing materials and underlayment for flooring, namely cured-in-place vapor membranes for use as a floor underlayment. (4) Non-metal building materials, namely, cement for leveling floors, walls and roofs in the form of primers; self-leveling cement-based underlayment for use over various substrates, namely, concrete, PVC, VCT, wood, ceramic, vinyl and tile; flooring decoupling underlayment mats; Cement-based self-leveling underlayment for floors; cement-based self-leveling wear-surface coating for floors; cement-based underlayment used for skim coating floors, for patching concrete floors and for levelling floors prior to the application of floor coverings; cement-based mortar for patching concrete floors, plywood floors, VCT floors and tile floors.

Produits et services

(1) Membrane underlayment for tile and stone flooring for reducing transmission of stresses from the substrate while dampening noise transmission; primer for use with membrane underlayment for tile and stone flooring.

Abrégé

Methods of formulating, premixed cement-based tiling compositions and application of such premixed cement-based tiling compositions as an adhesive or grout. The premixed cement-based tiling compositions include a premixed cementitious slurry having a pH and an alkali activation constituent. The premixed cementitious slurry includes an aluminous or a calcium aluminate cement slurry in an amount of about 35 wt. % to 50 wt. % in combination with one or more filler or modifier materials present in an amount of about 40 wt. % to 65 wt. %. The alkali activation constituent destabilizes the premixed cementitious slurry by increasing the pH thereof to generate a reaction between the premixed cementitious slurry and the alkali activation constituent resulting in the cement-based tiling composition for use as an adhesive or a grout. The alkali composition may be sodium hydroxide supersaturated with lithium carbonate.

Classes IPC  ?

• C04B 7/32 - Ciments alumineux
• C04B 28/06 - Ciments alumineux
• C04B 103/10 - Accélérateurs
• C04B 111/00 - Fonction, propriétés ou utilisation des mortiers, du béton ou de la pierre artificielle
• C04B 111/70 - Coulis

Abrégé

Methods of formulating, premixed cement-based tiling compositions and application of such premixed cement-based tiling compositions as an adhesive or grout. The premixed cement-based tiling compositions include a premixed cementitious slurry having a pH and an alkali activation constituent. The premixed cementitious slurry includes an aluminous or a calcium aluminate cement slurry in an amount of about 35 wt. % to 50 wt. % in combination with one or more filler or modifier materials present in an amount of about 40 wt. % to 65 wt. %. The alkali activation constituent destabilizes the premixed cementitious slurry by increasing the pH thereof to generate a reaction between the premixed cementitious slurry and the alkali activation constituent resulting in the cement-based tiling composition for use as an adhesive or a grout. The alkali composition may be sodium hydroxide supersaturated with lithium carbonate.

Classes IPC  ?

• C04B 40/00 - Procédés, en général, pour influencer ou modifier les propriétés des compositions pour mortiers, béton ou pierre artificielle, p. ex. leur aptitude à prendre ou à durcir

Produits et services

(1) Primers and sealers, namely, primer and sealing agents for concrete, tile, wood and stone; water-based primer for concrete, tile, wood and stone; two-part epoxy coating for sealing concrete surfaces; vapor-and waterproofing materials and underlayment for floors, namely cured-in-place vapor and waterproof membranes for use as a floor underlayment; Two-part epoxy coating for vapor-and waterproofing floors. (2) Cementitious materials including those used for construction, namely, cement; tile and stone installation materials, namely, cement of installing tile and stone; floor underlayments; cementitious leveling and patching compounds for floors, pavers and walls; cement-based underlayment for floor surfaces;

Produits et services

(1) General purpose paints, coating, sealers and chemical treatments for protecting exterior and interior surfaces; general purpose stone, tile, ceramics, masonry and grout sealers. (2) Chemical treatments, namely stone, tile, ceramics, masonry and grout sealers.

Produits et services

(1) Chemical treatments, namely stone, tile, ceramics, masonry and grout sealers

Produits et services

(1) Chemical treatments, namely stone, tile, ceramics, masonry and grout sealers. (2) Chemical treatments, namely, chemical cleaners for stone, tile, ceramics, masonry and grout.

Produits et services

(1) Sealing compounds for use on stone, concrete, brick, and masonry. (2) Cleaner for use on stone, concrete, brick, and masonry.

Produits et services

Insulating materials including those used for construction; sound- and impact-resistant membranes for use in construction to reduce and prevent transmission of cracks; construction materials, namely, non-metal sub-floor sound dampening membranes Flooring underlayments; flooring underlayment for tile, stone and other hard surfaces

Produits et services

(1) Stains and finishes for exterior and interior use on concrete substrates, polyaspartic and epoxy based floor coatings; urethane-based joint filler and repair compositions for concrete surfaces. (2) Self-leveling non-metal floors; poured in place floors; resinous floors; polyaspartic floors

Produits et services

Primers and sealers, namely, primer and sealing agents for concrete, tile, wood and stone; water-based primer for concrete, tile, wood and stone; two-part epoxy coating for sealing concrete surfaces; two-part epoxy coating for vapor-and waterproofing floors Cementitious materials including those used for construction, namely, cement; tile and stone installation materials, namely, cement for installing tile and stone; floor underlayments; cementitious leveling and patching compounds for floors, pavers and walls; cement-based underlayment for floor surfaces; vapor- and waterproofing materials and underlayment for floors, namely, cured-in-place vapor- and waterproof membranes for use as a floor underlayment

Produits et services

Coatings and sealers, namely chemical treatments for stone, tile, ceramics, masonry, and grout; stone, tile, ceramics, masonry, and grout sealers. Polishing preparations and cleaning preparations, namely chemical treatments for stone, tile, ceramics, masonry, and grout; chemical cleaners and polishes for stone, tile, ceramics, masonry and grout.

Produits et services

Chemical treatments for exterior and interior surfaces. Cleaning preparations;  chemical cleaners for stone, tile, ceramics, masonry and grout.

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 13/04 - Enduits de base pour le plâtre
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
• B32B 37/18 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches toutes les couches existant et présentant une cohésion avant la stratification impliquant uniquement l'assemblage de feuilles ou de panneaux individualisés
• B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
• B32B 38/04 - Poinçonnage, coupe ou perforation
• E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
• E04F 15/08 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en pierre ou en matériau analogue, p. ex. bétonRevêtements de sol composés d'un certain nombre d'éléments semblables en verre
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures

Produits et services

PENETRATING SEALER COATINGS FOR USE ON STONE, TILE, CERAMICS, MASONRY AND GROUT CHEMICAL CLEANERS AND POLISHES, NAMELY, CLEANING AND POLISHING PREPARATIONS FOR STONE, TILE, CERAMICS, MASONRY AND GROUT

Produits et services

Paints, coating, sealers; paints, coatings, sealers and chemical treatments for exterior and interior surfaces; stone, tile, ceramics, masonry and grout sealers.

Produits et services

Chemical cleaners for stone, tile, ceramics, masonry and grout. Paints, coating, sealers; paints, coatings, sealers and chemical treatments for exterior and interior surfaces; stone, tile, ceramics, masonry and grout sealers. Cleaning preparations; cleaning preparations for exterior and interior surfaces.

Produits et services

Chemical cleaners for stone, tile, ceramics, masonry and grout. Paints, coating, sealers; paints, coatings, sealers and chemical treatments for exterior and interior surfaces; stone, tile, ceramics, masonry and grout sealers. Cleaning preparations; cleaning preparations for exterior and interior surfaces.

Produits et services

Paints; paints for exterior and interior surfaces.

Produits et services

Paints, primers, coatings, sealers, pigments, dyes, coloring additives, aggregate fillers (particles, chips, flakes) being additives for paints and coatings for a variety of exterior and interior surfaces; stains and finishes for exterior and interior use on a variety of substrates, polyaspartic and epoxy based floor coatings. Urethane-based joint filler and repair compositions for concrete surfaces. Non-metallic building materials; non-metallic flooring; self-leveling non-metal floors; poured in place floors; resinous floors; polyaspartic floors; aggregates for flooring including vinyl, resin, mica, silica, quartz chips, flakes and particles.

Produits et services

Paints, primers, coatings, sealers, pigments and coloring additives for variety of exterior and interior surfaces; stains and finishes for exterior and interior use on a variety of substrates, polyaspartic floor coatings.

Produits et services

PAINTS; PRIMERS; SEALERS, NAMELY, CLEAR SEALING FINISHES FOR EXTERIOR AND INTERIOR USE ON A VARIETY OF SUBSTRATES; COATINGS, NAMELY, STAINS AND CLEAR AND COLORED FINISHES FOR EXTERIOR AND INTERIOR USE ON A VARIETY OF SUBSTRATES; POLYASPARTIC AND EPOXY BASED FLOOR COATINGS; PIGMENTS; STAINS AND COLORED FINISHES FOR DYEING CONCRETE; LIQUID COLORANTS FOR DYEING CONCRETE; ADDITIVES AND COLOR PIGMENTS IN PARTICULATE FORM TO ADD COLOR OR TEXTURE FOR A VARIETY OF EXTERIOR AND INTERIOR SURFACES; URETHANE-BASED LIQUID FILLER COMPOSITIONS IN THE NATURE OF SEALER COATINGS FOR REPAIRING JOINTS IN CONCRETE AND SURFACES OF CONCRETE SELF-LEVELING NON-METAL FLOORS; LIQUID-BASED FLOORING MATERIAL IN THE NATURE OF RESINOUS, POLYUREA AND POLYASPARTIC FLOORING MATERIAL THAT IS POURED OVER FLOORING UNDERLAYMENT AND CURED IN PLACE; AGGREGATE MATERIAL FOR FLOORING COMPOSED OF VINYL, RESIN, MICA, SILICA, QUARTZ CHIPS, FLAKES AND PARTICLES

Produits et services

Coatings; Raw natural resins; Thinners and thickeners for coatings, dyes and inks; Dyes, colorants, pigments and inks.

Abrégé

Grouts, grout products and methods of applying such grouts that include a urethane-acrylic hybrid polymer dispersion (UA-HPD) and a filler material. The UA-HPD may be present in an amount of about 10-40% by weight of the composition, while the filler material may be present in an amount of about 60-90% by weight of the composition. Additional filler materials may also be provided within the UA-HPD grout composition to provide the resultant UA-HPD grout with desired characteristics and properties. The UA-HPD containing grouts are applied between spaced-apart tiles and/or masonry to fill voids and/or joints there-between.

Classes IPC  ?

• C04B 26/16 - Polyuréthanes
• C04B 26/06 - Acrylates
• C04B 111/70 - Coulis

Abrégé

Grouts, grout products and methods of applying such grouts that include a urethane- acrylic hybrid polymer dispersion (UA-HPD) and a filler material. The UA-HPD may be present in an amount of about 10-40% by weight of the composition, while the filler material may be present in an amount of about 60-90% by weight of the composition. Additional filler materials may also be provided within the UA-HPD grout composition to provide the resultant UA-HPD grout with desired characteristics and properties. The UA-HPD containing grouts are applied between spaced-apart tiles and/or masonry to fill voids and/or joints there-between.

Classes IPC  ?

• C04B 26/16 - Polyuréthanes
• C04B 26/06 - Acrylates
• C04B 14/06 - QuartzSable
• C04B 14/04 - Matières riches en siliceSilicates

Produits et services

(1) Grout (2) Curable grout for tile, slate, glass, brick, stone, masonry, mosaics, and marble on floors, walls, ceilings and other interior and exterior surface coverings, excluding leak sealant formulations, sealing products for pipes, conduits, fluid passages, and for leak mitigation goods

Produits et services

Grout.

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 13/08 - Revêtements ou enduits, p. ex. pour murs ou plafonds constitués d'éléments d'habillage ou de garnissageLeurs bâtisLeurs moyens de fixation constitués de plusieurs éléments d'habillage ou de garnissage semblables

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 13/07 - Revêtements ou enduits, p. ex. pour murs ou plafonds constitués d'éléments d'habillage ou de garnissageLeurs bâtisLeurs moyens de fixation
• E04F 13/08 - Revêtements ou enduits, p. ex. pour murs ou plafonds constitués d'éléments d'habillage ou de garnissageLeurs bâtisLeurs moyens de fixation constitués de plusieurs éléments d'habillage ou de garnissage semblables

Abrégé

A support for installing facing materials such as ceramic tiles on a substrate such as floors, walls and ceilings wherein the support plate has a plurality of spaced apart recesses in the plate material, with the recesses being open at the top surface and have solid sidewalls and a base, and a plurality of slots in the non-recessed portions of the plate material extending through the top surface and bottom surface, the slots joining one or more adjacent recesses. The support plate of the invention is used for tile installations between the substrate and such tile. Thin-set mortar that is used to secure the tile to the support plate flows into the recesses and into the slots forming a continuous bond between the mortar and the adjacent slots providing for a strong bond between the support plate, mortar and the tiles.

Classes IPC  ?

• E04F 13/04 - Enduits de base pour le plâtre
• E04F 15/18 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants
• E04B 5/19 - Structures de planchers partiellement formées sur place comportant des nervures de renforcement ou autres conformations semblables à des poutres entièrement coulées entre des éléments de remplissage les éléments de remplissage jouant le rôle de coffrages permanents auto-portants
• E04B 5/32 - Structures de planchers entièrement coulées sur place avec ou sans éléments de coffrage ou armatures