A barrel nut assembly for use on a variety of firearms is provided. The assembly is made up of a barrel nut, generally cylindrical in shape with a threaded central bore, and an externally threaded locknut which is used in conjunction with the barrel nut to secure a barrel to a firearm upper receiver. The barrel nut has an integral bushing on its exterior constructed to support either the gas tube or piston of the host firearm's operating system. The barrel nut is configured so that it may be independently and non-rotationally held within a vice or other fixture during installation of the barrel and while the locknut is tightened to a preset torque to hold the barrel in place. The barrel nut assembly affords the user a method and apparatus that aligns a central bore in the bushing with the opening in the upper receiver that receives an operating system component of the firearm while the barrel nut is independent of the torque applied to the locknut to properly secure the barrel to the upper receiver.
F16B 37/00 - DISPOSITIFS POUR ASSEMBLER OU BLOQUER LES ÉLÉMENTS DE CONSTRUCTION OU LES PARTIES DE MACHINES, p.ex. CLOUS, CHEVILLES, ÉCROUS, VIS, BOULONS, BAGUES ANNULAIRES FORMANT RESSORT, BRIDES OU COLLIERS, CLIPS OU PINCES, COINS; ASSEMBLAGES OU JOINTURES Écrous ou pièces similaires avec entrées de filetage
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearm's gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pin's annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end. The extractor recess is constructed so that the face of the bolt is round and the adjacent lugs fully supported. The extractor engages approximately 17% more of a seated ammunition cartridge's rim as compared to the prior art AR15/M16 extractor. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/38 - Mécanismes à verrous semi-libres, c. à d. à verrous montés mobiles sur le bloc de culasse, ou sur le tube de l'arme ou la boîte de culasse munis d'éléments de verrouillage basculants, p.ex. de leviers ou de volets pivotants
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
Systems and methods for an adjustable gas block are described. Systems may include an adjustment subassembly. The adjustment subassembly may include a valve stem end with a front-most portion larger in diameter than the rear-most portion and a boss extending from the forward portion of the valve stem end; a valve ring surrounding the boss of the valve stem end; a valve threaded portion for receiving the boss of the valve stem end and having a threaded portion; and a valve rotator coupled to the valve threaded portion for adjusting the flow of gas. Systems may include a gas block assembly. The gas block assembly may include a gas block through hole; a first duct to direct pressurized gas from a barrel to a plenum; a second duct to direct a regulated volume of gas to a gas operating system; a seat valve to control the regulated volume of gas to the gas operating system; and a gas block threaded portion for coupling to the valve threaded portion. The adjustment subassembly may be coupled to the gas block assembly.
An upper receiver assembly for a firearm having an upper receiver with an integral barrel nut, a handguard assembly and a barrel nut assembly with a barrel and lock nut is provided. The barrel is received by the upper receiver and is secured directly to the upper receiver using the lock nut. The upper receiver also includes an integral handguard mounting member to which the handguard assembly may be directly attached. The upper receiver assembly allows the user to attach both the barrel and handguard assemblies directly to the upper receiver, independently of one another.
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F41A 3/66 - Boîtes ou châssis de culasse; Carcasses
F41C 23/16 - Fûts ou devants; Poignées; Garde-mains
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 21/00 - Tubes d'arme; Accessoires de bouches de canon; Montage des tubes d'arme
F41C 23/20 - Crosses; Plaques de couche; Leur montage
5.
ADJUSTABLE GAS BLOCK FOR AN INDIRECT GAS OPERATED FIREARM
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearms gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pins annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end and an extractor recess. The extractor recess is constructed to accommodate an enlarged extractor claw while not undercutting the bolt lugs adjacent thereto. The extractor engages approximately 57% more of a seated ammunition cartridges rim as compared to some prior art AR15/M16 type extractors used with automatic firearms chambered in 6.8SPC. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/14 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement l'éjecteur étant monté sur ou dans le bloc de culasse
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/16 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs
Systems and methods for an adjustable gas block are described. Systems may include an adjustment subassembly. The adjustment subassembly may include a valve stem end with a front-most portion larger in diameter than the rear-most portion and a boss extending from the forward portion of the valve stem end; a valve ring surrounding the boss of the valve stem end; a valve threaded portion for receiving the boss of the valve stem end and having a threaded portion; and a valve rotator coupled to the valve threaded portion for adjusting the flow of gas. Systems may include a gas block assembly. The gas block assembly may include a gas block through hole; a first duct to direct pressurized gas from a barrel to a plenum; a second duct to direct a regulated volume of gas to a gas operating system; a seat valve to control the regulated volume of gas to the gas operating system; and a gas block threaded portion for coupling to the valve threaded portion. The adjustment subassembly may be coupled to the gas block assembly.
A fixture for use with AR15/M16 type firearms is provided herein. The fixture is made up of several parts that when used in conjunction with one another mitigate the transfer of torque from the barrel nut to the firearms receiver during barrel installation. The fixture affords the user a method and apparatus that holds the barrel in alignment with the firearm receiver and secures the barrel against rotational movement during installation of a barrel nut or similar device. The fixture may be configured to work with the legacy AR15/M16 type barrel nut, as well as other designs as disclosed herein.
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/84 - Amortisseurs à ressort à boudin montés à l'intérieur de la crosse
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearm's gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pin's annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end. The extractor recess is constructed so that the face of the bolt is round and the adjacent lugs fully supported. The extractor engages approximately 17% more of a seated ammunition cartridge's rim as compared to the prior art AR15/M16 extractor. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/38 - Mécanismes à verrous semi-libres, c. à d. à verrous montés mobiles sur le bloc de culasse, ou sur le tube de l'arme ou la boîte de culasse munis d'éléments de verrouillage basculants, p.ex. de leviers ou de volets pivotants
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
Systems and methods for an adjustable gas block are described. Systems may include an adjustment subassembly. The adjustment subassembly may include a valve stem end with a front-most portion larger in diameter than the rear-most portion and a boss extending from the forward portion of the valve stem end; a valve ring surrounding the boss of the valve stem end; a valve threaded portion for receiving the boss of the valve stem end and having a threaded portion; and a valve rotator coupled to the valve threaded portion for adjusting the flow of gas. Systems may include a gas block assembly. The gas block assembly may include a gas block through hole; a first duct to direct pressurized gas from a barrel to a plenum; a second duct to direct a regulated volume of gas to a gas operating system; a seat valve to control the regulated volume of gas to the gas operating system; and a gas block threaded portion for coupling to the valve threaded portion. The adjustment subassembly may be coupled to the gas block assembly.
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearms gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pins annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end and an extractor recess. The extractor recess is constructed to accommodate an enlarged extractor claw while not undercutting the bolt lugs adjacent thereto. The extractor engages approximately 57% more of a seated ammunition cartridges rim as compared to some prior art AR15/M16 type extractors used with automatic firearms chambered in 6.8SPC. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 15/14 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement l'éjecteur étant monté sur ou dans le bloc de culasse
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/16 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs
An upper receiver assembly for a firearm having an upper receiver with an integral barrel nut, a handguard assembly and a barrel nut assembly with a barrel and lock nut is provided. The barrel is received by the upper receiver and is secured directly to the upper receiver using the lock nut. The upper receiver also includes an integral handguard mounting member to which the handguard assembly may be directly attached. The upper receiver assembly allows the user to attach both the barrel and handguard assemblies directly to the upper receiver, independently of one another.
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F41A 3/66 - Boîtes ou châssis de culasse; Carcasses
F41C 23/16 - Fûts ou devants; Poignées; Garde-mains
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 21/00 - Tubes d'arme; Accessoires de bouches de canon; Montage des tubes d'arme
F41C 23/20 - Crosses; Plaques de couche; Leur montage
15.
Barrel nut assembly and method to attach a barrel to a firearm using such assembly
A barrel nut assembly for use on a variety of firearms is provided. The assembly is made up of a barrel nut, generally cylindrical in shape with a threaded central bore, and an externally threaded locknut which is used in conjunction with the barrel nut to secure a barrel to a firearm upper receiver. The barrel nut has an integral bushing on its exterior constructed to support either the gas tube or piston of the host firearm's operating system. The barrel nut is configured so that it may be independently and non-rotationally held within a vice or other fixture during installation of the barrel and while the locknut is tightened to a preset torque to hold the barrel in place. The barrel nut assembly affords the user a method and apparatus that aligns a central bore in the bushing with the opening in the upper receiver that receives an operating system component of the firearm while the barrel nut is independent of the torque applied to the locknut to properly secure the barrel to the upper receiver.
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F16B 37/00 - DISPOSITIFS POUR ASSEMBLER OU BLOQUER LES ÉLÉMENTS DE CONSTRUCTION OU LES PARTIES DE MACHINES, p.ex. CLOUS, CHEVILLES, ÉCROUS, VIS, BOULONS, BAGUES ANNULAIRES FORMANT RESSORT, BRIDES OU COLLIERS, CLIPS OU PINCES, COINS; ASSEMBLAGES OU JOINTURES Écrous ou pièces similaires avec entrées de filetage
16.
Barrel nut assembly and method to attach a barrel to a firearm using such assembly
A fixture for use with AR15/M16 type firearms is provided herein. The fixture is made up of several parts that when used in conjunction with one another mitigate the transfer of torque from the barrel nut to the firearms receiver during barrel installation. The fixture affords the user a method and apparatus that holds the barrel in alignment with the firearm receiver and secures the barrel against rotational movement during installation of a barrel nut or similar device. The fixture may be configured to work with the legacy AR15/M16 type barrel nut, as well as other designs as disclosed herein.
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41A 3/84 - Amortisseurs à ressort à boudin montés à l'intérieur de la crosse
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearm's gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pin's annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end. The extractor recess is constructed so that the face of the bolt is round and the adjacent lugs fully supported. The extractor engages approximately 17% more of a seated ammunition cartridge's rim as compared to the prior art AR15/M16 extractor. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/38 - Mécanismes à verrous semi-libres, c. à d. à verrous montés mobiles sur le bloc de culasse, ou sur le tube de l'arme ou la boîte de culasse munis d'éléments de verrouillage basculants, p.ex. de leviers ou de volets pivotants
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
19.
Adjustable gas block for an indirect gas operated firearm
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
Systems and methods for an adjustable gas block are described. Systems may include an adjustment subassembly and a gas block assembly, wherein the adjustment subassembly may be coupled to the gas block assembly.
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearms gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pins annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end and an extractor recess. The extractor recess is constructed to accommodate an enlarged extractor claw while not undercutting the bolt lugs adjacent thereto. The extractor engages approximately 57% more of a seated ammunition cartridges rim as compared to some prior art AR15/M16 type extractors used with automatic firearms chambered in 6.8 SPC. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 15/14 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement l'éjecteur étant monté sur ou dans le bloc de culasse
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/16 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs
An upper receiver assembly for a firearm having an upper receiver with an integral barrel nut, a handguard assembly and a barrel nut assembly with a barrel and lock nut is provided. The barrel is received by the upper receiver and is secured directly to the upper receiver using the lock nut. The upper receiver also includes an integral handguard mounting member to which the handguard assembly may be directly attached. The upper receiver assembly allows the user to attach both the barrel and handguard assemblies directly to the upper receiver, independently of one another.
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F41A 3/66 - Boîtes ou châssis de culasse; Carcasses
F41C 23/16 - Fûts ou devants; Poignées; Garde-mains
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 21/00 - Tubes d'arme; Accessoires de bouches de canon; Montage des tubes d'arme
F41C 23/20 - Crosses; Plaques de couche; Leur montage
23.
Adjustable gas block for an indirect gas operated firearm
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41C 23/04 - Crosses ou parties de crosses articulées ou télescopiques
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/84 - Amortisseurs à ressort à boudin montés à l'intérieur de la crosse
Systems and methods for an adjustable gas block are described. Systems may include an adjustment subassembly. The adjustment subassembly may include a valve stem end with a front-most portion larger in diameter than the rear-most portion and a boss extending from the forward portion of the valve stem end; a valve ring surrounding the boss of the valve stem end; a valve threaded portion for receiving the boss of the valve stem end and having a threaded portion; and a valve rotator coupled to the valve threaded portion for adjusting the flow of gas. Systems may include a gas block assembly. The gas block assembly may include a gas block through hole; a first duct to direct pressurized gas from a barrel to a plenum; a second duct to direct a regulated volume of gas to a gas operating system; a seat valve to control the regulated volume of gas to the gas operating system; and a gas block threaded portion for coupling to the valve threaded portion. The adjustment subassembly may be coupled to the gas block assembly.
A barrel nut assembly for use on a variety of firearms is provided. The assembly is made up of a barrel nut, generally cylindrical in shape with a threaded central bore, and an externally threaded locknut which is used in conjunction with the barrel nut to secure a barrel to a firearm upper receiver. The barrel nut has an integral bushing on its exterior constructed to support either the gas tube or piston of the host firearm's operating system. The barrel nut is configured so that it may be independently and non-rotationally held within a vice or other fixture during installation of the barrel and while the locknut is tightened to a preset torque to hold the barrel in place. The barrel nut assembly affords the user a method and apparatus that aligns a central bore in the bushing with the opening in the upper receiver that receives an operating system component of the firearm while the barrel nut is independent of the torque applied to the locknut to properly secure the barrel to the upper receiver.
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F16B 37/00 - DISPOSITIFS POUR ASSEMBLER OU BLOQUER LES ÉLÉMENTS DE CONSTRUCTION OU LES PARTIES DE MACHINES, p.ex. CLOUS, CHEVILLES, ÉCROUS, VIS, BOULONS, BAGUES ANNULAIRES FORMANT RESSORT, BRIDES OU COLLIERS, CLIPS OU PINCES, COINS; ASSEMBLAGES OU JOINTURES Écrous ou pièces similaires avec entrées de filetage
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearms gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pins annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end and an extractor recess. The extractor recess is constructed to accommodate an enlarged extractor claw while not undercutting the bolt lugs adjacent thereto. The extractor engages approximately 57% more of a seated ammunition cartridges rim as compared to some prior art AR15/M16 type extractors used with automatic firearms chambered in 6.8SPC. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 15/14 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement l'éjecteur étant monté sur ou dans le bloc de culasse
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/16 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs
An upper receiver assembly for a firearm having an upper receiver with an integral barrel nut, a handguard assembly and a barrel nut assembly with a barrel and lock nut is provided. The barrel is received by the upper receiver and is secured directly to the upper receiver using the lock nut. The upper receiver also includes an integral handguard mounting member to which the handguard assembly may be directly attached. The upper receiver assembly allows the user to attach both the barrel and handguard assemblies directly to the upper receiver, independently of one another.
F41A 3/66 - Boîtes ou châssis de culasse; Carcasses
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 21/00 - Tubes d'arme; Accessoires de bouches de canon; Montage des tubes d'arme
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F41C 23/16 - Fûts ou devants; Poignées; Garde-mains
F41C 23/20 - Crosses; Plaques de couche; Leur montage
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearm's gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pin's annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end. The extractor recess is constructed so that the face of the bolt is round and the adjacent lugs fully supported. The extractor engages approximately 17% more of a seated ammunition cartridge's rim as compared to the prior art AR15/M16 extractor. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/38 - Mécanismes à verrous semi-libres, c. à d. à verrous montés mobiles sur le bloc de culasse, ou sur le tube de l'arme ou la boîte de culasse munis d'éléments de verrouillage basculants, p.ex. de leviers ou de volets pivotants
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41C 23/14 - Crosses ou parties de crosse réglables, c. à d. adaptables aux besoins personnels, p.ex. longueur, inclinaison, gauchissement
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41A 3/84 - Amortisseurs à ressort à boudin montés à l'intérieur de la crosse
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
31.
Adjustable gas block for an indirect gas operated firearm
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
A fixture for use with AR15/M16 type firearms is provided herein. The fixture is made up of several parts that when used in conjunction with one another mitigate the transfer of torque from the barrel nut to the firearms receiver during barrel installation. The fixture affords the user a method and apparatus that holds the barrel in alignment with the firearm receiver and secures the barrel against rotational movement during installation of a barrel nut or similar device. The fixture may be configured to work with the legacy AR15/M16 type barrel nut, as well as other designs as disclosed herein.
An ambidextrously operated charging handle for use with the M16 family of firearms is provided. The charging handle provides a latch mechanism consisting of two extended handles which are in operational communication with each other. Either handle may be independently retracted to disengage the latch mechanism of the charging handle from the host firearms receiver. The spring-biased mechanism of the charging handle is sheltered within the interior of the charging handle thereby protecting it from the elements. Further, an improved axial pin has been provided to secure the handles of the latch mechanism to the grasping portion of the charging handle.
F41A 3/72 - Leviers ou poignées d'armement; Leur montage sur les blocs de culasse
F41A 7/00 - Mécanismes auxiliaires pour ramener le bloc de culasse ou le tube de l'arme vers leur position de départ avant de commencer le tir automatique; Mécanismes d'entraînement des armes à feu à moteur externe; Dispositifs d'armement télécommandés des armes à feu
F41A 35/06 - Adaptations des armes à feu pour permettre leur utilisation par des tireurs droitiers et des tireurs gauchers
Systems and methods for an adjustable gas block are described. Systems may include an adjustment subassembly. The adjustment subassembly may include a valve stem end with a front-most portion larger in diameter than the rear-most portion and a boss extending from the forward portion of the valve stem end; a valve ring surrounding the boss of the valve stem end; a valve threaded portion for receiving the boss of the valve stem end and having a threaded portion; and a valve rotator coupled to the valve threaded portion for adjusting the flow of gas. Systems may include a gas block assembly. The gas block assembly may include a gas block through hole; a first duct to direct pressurized gas from a barrel to a plenum; a second duct to direct a regulated volume of gas to a gas operating system; a seat valve to control the regulated volume of gas to the gas operating system; and a gas block threaded portion for coupling to the valve threaded portion. The adjustment subassembly may be coupled to the gas block assembly.
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41C 23/04 - Crosses ou parties de crosses articulées ou télescopiques
F41C 23/12 - Crosses auxiliaires pour stabiliser les pistolets, p.ex. les revolvers, ou pour les transformer en armes à feu épaulées
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/84 - Amortisseurs à ressort à boudin montés à l'intérieur de la crosse
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearms gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pins annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end and an extractor recess. The extractor recess is constructed to accommodate an enlarged extractor claw while not undercutting the bolt lugs adjacent thereto. The extractor engages approximately 57% more of a seated ammunition cartridges rim as compared to some prior art AR15/M16 type extractors used with automatic firearms chambered in 6.8SPC. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 15/14 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement l'éjecteur étant monté sur ou dans le bloc de culasse
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/16 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs
37.
Adjustable gas block for an indirect gas operated firearm
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
An adjustable gas block for a gas operated firearm is provided that offers the user a means by which the volume of gas being directed to the host rifle's operating system can be adjusted. The adjustable gas block provides two positions of adjustment, with the position of use being selected based on whether or not a back pressure increasing device, such as a noise suppressor or a silencer, is mounted on the firearm. A first position provides the optimal volume of gas into the gas operating system for it to operate properly based on its factory configuration and in the absence of a back pressure increasing device. A second position is available for use when the back pressure is increased due to the presence of a back pressure increasing device. The second position exposes a port through which a portion of the volume of gas from the barrel is vented into a secondary chamber prior to being released into the atmosphere. By venting a portion of the gas into a secondary chamber, the amount of gas received by the operating system is reduced to a volume that is substantially equal to the volume of gas that would be received by the operating system in the absence of a back pressure increasing device. No tools are required to select either of the positions provided by the gas block.
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An upper receiver assembly for a firearm having an upper receiver with an integral barrel nut, a assembly and a barrel nut assembly with a barrel and lock nut is provided. The barrel is received by the upper receiver and is secured directly to the upper receiver using the lock nut. The upper receiver also includes an integral mounting member to which the assembly may be directly attached. The upper receiver assembly allows the user to attach both the barrel and assemblies directly to the upper receiver, independently of one another.
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
F41A 3/66 - Boîtes ou châssis de culasse; Carcasses
F41C 23/16 - Fûts ou devants; Poignées; Garde-mains
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F41A 21/00 - Tubes d'arme; Accessoires de bouches de canon; Montage des tubes d'arme
F41C 23/20 - Crosses; Plaques de couche; Leur montage
An ambidextrously operated charging handle for use with the M16 family of firearms is provided. The charging handle provides a latch mechanism consisting of two extended handles which are in operational communication with each other. Either handle may be independently retracted to disengage the latch mechanism of the charging handle from the host firearms receiver. The spring-biased mechanism of the charging handle is sheltered within the interior of the charging handle thereby protecting it from the elements. Further, an improved axial pin has been provided to secure the handles of the latch mechanism to the grasping portion of the charging handle.
F41A 3/72 - Leviers ou poignées d'armement; Leur montage sur les blocs de culasse
F41A 7/00 - Mécanismes auxiliaires pour ramener le bloc de culasse ou le tube de l'arme vers leur position de départ avant de commencer le tir automatique; Mécanismes d'entraînement des armes à feu à moteur externe; Dispositifs d'armement télécommandés des armes à feu
F41A 35/06 - Adaptations des armes à feu pour permettre leur utilisation par des tireurs droitiers et des tireurs gauchers
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41A 3/84 - Amortisseurs à ressort à boudin montés à l'intérieur de la crosse
F41A 3/78 - Amortisseurs ou dispositifs récupérateurs pour les blocs de culasse
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An adjustable gas block for a gas operated firearm is provided that offers the user a means by which the volume of gas being directed to the host rifle's operating system can be adjusted. The adjustable gas block provides two positions of adjustment, with the position of use being selected based on whether or not a back pressure increasing device, such as a noise suppressor or a silencer, is mounted on the firearm. A first position provides the optimal volume of gas into the gas operating system for it to operate properly based on its factory configuration and in the absence of a back pressure increasing device. A second position is available for use when the back pressure is increased due to the presence of a back pressure increasing device. The second position exposes a port through which a portion of the volume of gas from the barrel is vented into a secondary chamber prior to being released into the atmosphere. By venting a portion of the gas into a secondary chamber, the amount of gas received by the operating system is reduced to a volume that is substantially equal to the volume of gas that would be received by the operating system in the absence of a back pressure increasing device. No tools are required to select either of the positions provided by the gas block.
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearm's gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pin's annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end. The extractor recess is constructed so that the face of the bolt is round and the adjacent lugs fully supported. The extractor engages approximately 17% more of a seated ammunition cartridge's rim as compared to the prior art AR15/M16 extractor. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/38 - Mécanismes à verrous semi-libres, c. à d. à verrous montés mobiles sur le bloc de culasse, ou sur le tube de l'arme ou la boîte de culasse munis d'éléments de verrouillage basculants, p.ex. de leviers ou de volets pivotants
F41A 3/26 - Mécanismes à verrous rigides, c. à d. les éléments de verrouillage formant un assemblage rigide avec, respectivement, le bloc de culasse ou son levier de manœuvre, et le tube de l'arme ou la boîte de culasse les verrous tournant autour de l'axe du tube de l'arme, p.ex. verrous de culasse cylindriques rotatifs à action semi-automatique ou automatique, p.ex. le bloc de culasse comportant un support coulissant et une tête rotative
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
A buttstock assembly configured to work in conjunction with a compact buffer assembly consisting of a buffer tube, spring and bolt carrier with an integral buffer is provided. The buttstock assembly, buffer tube and bolt carrier are configured to work with AR15/M16 type firearms and their derivatives. By incorporating the buffer onto the bolt carrier, which is used in conjunction with a buffer tube of reduced length, the overall length of the host firearm is reduced by approximately 3.2 inches. No permanent modification need be made to the host firearm in order to utilize the compact buffer assembly and buttstock assembly disclosed herein.
F41A 3/70 - Dispositions anti-rebond, c. à d. dispositions pour prévenir le rebondissement du bloc de culasse à partir de sa position de fermeture
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41C 23/06 - Crosses spécialement adaptées pour réduire le recul
F41C 23/22 - Crosses comportant un emplacement de stockage d'objets
46.
Adjustable gas block for an indirect gas operated firearm
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block designed to interface with the indirect gas system is provided. Four indexable positions of adjustment are provided for on the adjustable gas block. Positions of adjustment are selected based on the use of a silencer, use of under-powered ammunition, the presence of un-burnt powder and debris in the host firearms operating system, or if the weapon is being fired under “ideal” circumstances. The provided gas block is designed to function with an indirect gas operating system. Excess gas from the operating system is not vented from the gas block thereby generating excess flash and sound. No tool is required to manipulate the adjustment mechanism of the gas.
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearms gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pins annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end and an extractor recess. The extractor recess is constructed to accommodate an enlarged extractor claw while not undercutting the bolt lugs adjacent thereto. The extractor engages approximately 57% more of a seated ammunition cartridges rim as compared to some prior art AR15/M16 type extractors used with automatic firearms chambered in 6.8 SPC. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
An adjustable gas block for a gas operated firearm offering a means to adjust a volume of gas directed to the host rifle's operating system. The adjustable gas block provides two positions of adjustment that are selectable based on the presence of a pressure increasing device being mounted on the firearm. A first position provides an optimal volume of gas into the gas operating system absent a back pressure increasing device. A second position usable in the presence of a back pressure increasing device causing venting of a portion of the volume of gas into a secondary chamber prior to release into the atmosphere. The amount of gas received by the operating system due to venting is reduced to a volume that is substantially equal to the volume of gas that would be received by the operating system absent a back pressure increasing device.
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
50.
Barrel nut assembly and method to attach a barrel to a firearm using such assembly
A firearm barrel nut assembly including barrel nut, generally cylindrical in shape with a threaded central bore, and an externally threaded locknut which is used in conjunction with the barrel nut to secure a barrel to a firearm upper receiver. The barrel nut has an integral bushing on its exterior constructed to support either the gas tube or piston of the host firearm's operating system. The barrel nut is configured so that it may be independently and non-rotationally held within a vice or other fixture during installation of the barrel and while the locknut is tightened to a preset torque to hold the barrel in place while the barrel nut is independent of the torque applied to the locknut to properly secure the barrel to the upper receiver.
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
F16B 37/00 - DISPOSITIFS POUR ASSEMBLER OU BLOQUER LES ÉLÉMENTS DE CONSTRUCTION OU LES PARTIES DE MACHINES, p.ex. CLOUS, CHEVILLES, ÉCROUS, VIS, BOULONS, BAGUES ANNULAIRES FORMANT RESSORT, BRIDES OU COLLIERS, CLIPS OU PINCES, COINS; ASSEMBLAGES OU JOINTURES Écrous ou pièces similaires avec entrées de filetage
An upper receiver assembly for a firearm having an upper receiver with an integral barrel nut, a handguard assembly and a barrel nut assembly with a barrel and lock nut is provided. The barrel is received by the upper receiver and is secured directly to the upper receiver using the lock nut. The upper receiver also includes an integral handguard mounting member to which the handguard assembly may be directly attached. The upper receiver assembly allows the user to attach both the barrel and handguard assemblies directly to the upper receiver, independently of one another.
F41A 3/64 - Montage de blocs de culasse; Accessoires pour les blocs de culasse ou pour leur montage
F41A 3/66 - Boîtes ou châssis de culasse; Carcasses
F41C 23/16 - Fûts ou devants; Poignées; Garde-mains
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 21/48 - Moyens de montage des tubes d'arme, p.ex. montures amovibles des tubes d'arme interchangeables
An improved bolt and bolt carrier with integral gas key having an extension nozzle threadedly secured and pinned to the gas key for use with a direct gas operated firearm is provided. The extension nozzle is designed to receive a portion of the host firearm's gas operating system. The firing pin retaining pin is oriented so as to expose its widest profile to the firing pin's annular flange, increasing its service life. The bolt has a plurality of lugs extending from its forward end. The extractor recess is constructed so that the face of the bolt is round and the adjacent lugs fully supported. The extractor engages approximately 17% more of a seated ammunition cartridge's rim as compared to the prior art AR15/M16 extractor. The result is an improved bolt and bolt carrier which provides for increased operational reliability.
F41A 15/12 - Extracteurs de cartouche, c. à d. dispositifs pour retirer les cartouches ou les douilles au moins partiellement de la chambre de cartouche; Ejecteurs de cartouche, c. à d. dispositifs pour éjecter les cartouches ou les douilles retirées de l'arme à feu pour des armes à feu à culasse mobile axialement
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
F41A 3/38 - Mécanismes à verrous semi-libres, c. à d. à verrous montés mobiles sur le bloc de culasse, ou sur le tube de l'arme ou la boîte de culasse munis d'éléments de verrouillage basculants, p.ex. de leviers ou de volets pivotants
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
An ambidextrously operated charging handle for use with the M16 family of firearms is provided. The charging handle provides a latch mechanism consisting of two extended handles which are in operational communication with each other. Either handle may be independently retracted to disengage the latch mechanism of the charging handle from the host firearms receiver. The spring-biased mechanism of the charging handle is sheltered within the interior of the charging handle thereby protecting it from the elements. Further, an improved axial pin has been provided to secure the handles of the latch mechanism to the grasping portion of the charging handle.
F41A 3/72 - Leviers ou poignées d'armement; Leur montage sur les blocs de culasse
F41A 7/00 - Mécanismes auxiliaires pour ramener le bloc de culasse ou le tube de l'arme vers leur position de départ avant de commencer le tir automatique; Mécanismes d'entraînement des armes à feu à moteur externe; Dispositifs d'armement télécommandés des armes à feu
F41A 35/06 - Adaptations des armes à feu pour permettre leur utilisation par des tireurs droitiers et des tireurs gauchers
54.
Barrel nut assembly and method to attach a barrel to a firearm using such assembly
A fixture for use with AR15/M16 type firearms is provided herein. The fixture is made up of several parts that when used in conjunction with one another mitigate the transfer of torque from the barrel nut to the firearms receiver during barrel installation. The fixture affords the user a method and apparatus that holds the barrel in alignment with the firearm receiver and secures the barrel against rotational movement during installation of a barrel nut or similar device. The fixture may be configured to work with the legacy AR15/M16 type barrel nut, as well as other designs as disclosed herein.
A bolt carrier for use with the AR15/M16 family of firearms is provided. The bolt carrier includes an integrally formed carrier key and spherical strike face surrounded by a cylindrical counterbore made with a downward angle to act against the tilting force imparted by the operating rod of the firearm's gas operating system. The outer surface of the carrier includes upper and lower running rails that all extend fully to the front face of the carrier to lengthen the carrier's rail support or bearing surfaces against the receiver. To improve the robust operation of the firearm in over the beach operations, the bottom and rear of the receiver extension has drain holes formed through which water is forced out of the receiver extension by the reciprocating action of the bolt carrier when the weapon is fired.
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An automatic rifle bolt carrier with a fluted boss for the AR15/M16 family of firearms has been provided. The rear of the bolt carrier has been provided with a boss having bearing surfaces which are in operational contact with the interior of the host firearm's upper receiver to prevent the carrier from tilting while it is reciprocating during normal operation. The boss and rearward end of the bolt carrier are provided with flutes which allow water to flow between the buffer tube and upper receiver while the bolt carrier is reciprocating during normal operation, enabling a properly equipped firearm to be used during over the beach operations. The bolt carrier also includes a scallop cut located about the top of its backmost end which is perpendicular to the longitudinal axis of the bolt carrier.
F41A 5/24 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz la pression des gaz agissant directement sur le bloc de culasse ou sur les verrous
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
57.
Top opening, modular top rail, multi-rifle adaptable free float rail adaptor system (ARM-R)
An improved Rail Adaptor System/Rail Accessory System (RAS) which attaches to a firearm. The rail is top opening, modular, and free floats the barrel. Provided is a rigid, lightweight, strong platform for mounting firearm accessories. Heat transmission from the barrel assembly to the user is limited. The user is also protected from ventilated gases originating from the operating system. A quick detachable top rail section is provided so that the gas system may be easily accessed. This removable top section of the rail is what makes this device unique because the RAS may be installed without removing the barrel, gas system, front sight base, flash hider or the barrel nut. The herein described RAS is adaptable to a wide variety of firearms with the use of conversion parts. The top tail “returns to zero” on reinstallation allowing the remounting of various optics and electronic gun sites without the need to realign them.
A gun sight base which is designed to allow the user to quickly adjust the elevation of the attached gun sight as a means to affect the trajectory of a projectile discharged from the host firearm. Provided is a removable, pre-calibrated adjustment cam which is in operational contact with the attached gun sight. A distance indicator is visible to the user to allow for rapid elevation adjustments without the need for tools.
Improved receiver set for an indirect or direct gas operated firearm wherein the charging handle has been moved to the side of the upper receiver, the magazine well has been flared open to better receive a magazine, and the lower receiver has a semi-circular shelf in the rear which supports the proximal end of the bolt carrier as it is longitudinally displaced due to firing of the weapon.
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An ambidextrously operated bolt catch assembly for a firearm facilitates ease of use by either right handed or left handed shooters. The ambidextrous bolt catch assembly includes two levers, one on each side of the firearm, that interact with each other. Each lever has a primary contact surface and a secondary contact surface. By depressing the primary contact surface of either lever, both levers rotate to move the bolt catch assembly from a displaced position to a static position. Conversely, by depressing the secondary contact surface of either lever, both levers rotate to move the bolt catch assembly from a static position to a displaced position.
A firearm including a barrel, receiver, indirect gas system and an adjustable gas block. Four positions of adjustment are provided for on the adjustable gas block, each of which provides a different setting to regulate gas flow into the host firearm's operating system. A position of adjustment is selected based on how the firearm is being used. The provided positions of adjustment are calibrated for the standard use of the host firearm, use of a silencer, use of the firearm under hard or adverse conditions or when it is necessary to increase the firearm's rate of fire, and to block the flow of gas into the operating system. The provided gas block is designed to function with an indirect gas operating system, but could be adapted for use with a direct gas impingement system as well. Excess gas from the operating system is not vented from the gas block thereby eliminating the generation of additional muzzle flash and sound. No tool is required to manipulate the adjustment mechanism of the gas block.
A bolt carrier for use with the ARI5/MI6 family of firearms is provided. The bolt carrier includes an integrally formed carrier key and spherical strike face surrounded by a cylindrical counterbore made with a downward angle to act against the tilting force imparted by the operating rod of the firearm's gas operating system. The outer surface of the carrier includes upper and lower running rails that all extend fully to the front face of the carrier to lengthen the carrier's rail support or bearing surfaces against the receiver.
F41A 5/18 - Mécanismes ou systèmes automatiques de déverrouillage de la culasse à l'aide d'une force créée par une charge propulsive par emprunt des gaz
An automatic rifle bolt carrier with a fluted boss for the AR15/M16 family of firearms has been provided. The rear of the bolt carrier has been provided with a boss having bearing surfaces which are in operational contact with the interior of the host firearm's upper receiver to prevent the carrier from tilting while it is reciprocating during normal operation. The boss and rearward end of the bolt carrier are provided with flutes which allow water to flow between the buffer tube and upper receiver while the bolt carrier is reciprocating during normal operation, enabling a properly equipped firearm to be used during over the beach operations. The bolt carrier also includes a scallop cut located about the top of its backmost end which is perpendicular to the longitudinal axis of the bolt carrier.
An improved Rail Adaptor System/Rail Accessory System (RAS) which attaches to a firearm. The rail is top opening, modular, and free floats the barrel. Provided is a rigid, lightweight, strong platform for mounting firearm accessories. Heat transmission from the barrel assembly to the user is limited. The user is also protected from ventilated gases originating from the operating system. A quick detachable top rail section is provided so that that gas system may be easily accessed. This removable top section of the rail is what makes this device unique because the RAS may be installed without removing the barrel, gas system, front sight base, flash hider or the barrel nut. The herein described RAS is adaptable to a wide variety of firearms with the use of conversion parts. The top rail “returns to zero” on reinstallation allowing the remounting of various optics and electronic gun sites without the need to realign them.
A firing pin safety catch mechanism for a firearm, especially an auto-loading firearm which operates with a closed action such as found on the United States Military's M16 and its various derivatives. The firearm includes a firing pin which is housed within a bolt carrier group and which is capable of being moved from a rest position in which its proximal end is out of the travel path of the hammer to a firing position. The safety catch mechanism includes a safety catch, a pin and a spring for biasing the safety catch to hold the firing pin in its rest position to prevent the unintentional movement of the firing pin and thereby prevent the unintentional discharge of the host firearm. The safety catch includes a cam surface cooperating with the hammer so that the catch is released from engagement with the firing pin when the hammer has substantially completed its path of travel.
A firearm has a frame with a barrel connected to the frame and defining a barrel axis. The barrel has a rear end defining a chamber, and a bolt assembly reciprocates with respect to the chamber between a closed position adjacent the chamber, and an open position away from the chamber. A fire control assembly includes a trigger and a selector switch with a semi-automatic position and a fully-automatic position. The fire control assembly includes a bolt assembly sear operably engaging the bolt. The fire control assembly operates when the selector switch is in the semi-automatic position in response to pulling the trigger to discharge the firearm, to load a cartridge, and to position the bolt in the closed position. The fire control assembly operates when the selector switch is in the fully-automatic position in response to pulling the trigger to discharge the firearm, and to hold the bolt in the open position. The fire control may include a sub-frame connected to the frame and to the bolt assembly sear, and may include a safety sear that prevents firing out of battery when in either full-auto or semi-auto modes. The fire control system may include a facility that momentarily maintains the trigger in a firing position when it is released while the bolt is moving forward from the open position.
A self-cleaning gas operating system for a firearm having a conventional bolt carrier assembly is disclosed comprising: a nozzle assembly having a nozzle in direct communication with a port on the muzzle; said nozzle assembly nested within a piston cup having a vent, a connecting rod operationally linking the piston cup to a spring loaded operating rod which is substantially co-axial to a bolt carrier key having a striking portion, said striking portion having a concave strike face in contact with said operating rod, wherein gas discharged from a fired cartridge displaces the piston cup and causes the operating rod to strike the strike face displacing the bolt assembly.
A modular receiver system for firearms comprising a barrel and receiver assembly providing a quick changeover coupling means for connecting the barrel to the receiver, wherein the coupling means comprises a barrel retaining bushing and a pair of opposed cam surfaces on the receiver for hinged engagement of the cam surfaces against the barrel, and wherein the modular receiver system further comprises a rail system for mounting ancillary firearms equipments.
